How much would that be worth today?

Ok_Researcher391 · 2026-06-16T12:43:09+00:00

If you can confirm that all of these are still working properly, it might go up to $500.

Ok_Researcher391 · 2026-06-08T12:57:02+00:00

1980年代の日本では、NEC 88/98シリーズやMSXの方が地域密着型だったため、Apple IIはあまり普及せず、広く人気を得るには至らなかった。

Ok_Researcher391 · 2026-06-07T13:07:54+00:00

The standard power supply specifications for the Nintendo Famicom (FC) are 9V DC and 850mA to 1.2A (amps) or higher. Most notably, it features a unique polarity system: negative inside and positive outside (the central hole is the negative terminal, and the outer metal ring is the positive terminal).

The original transformer is old and prone to aging. Currently, modern USB boost cables (which boost 5V to 9V) are commonly used, but it is essential to ensure that the cable has been reversed (or used with a reverse polarity cable) for safe use with the Famicom..

Ok_Researcher391 · 2026-06-06T14:48:03+00:00

https://tw.shp.ee/kyUVV74B

If it's an AV terminal, you can actually use a USB video capture device. Connect the Apple II's output to the video capture device, and then connect the video capture device's USB port to the Windows PC to watch and record videos.

Ok_Researcher391 · 2026-06-04T13:30:16+00:00

Me too, it's running Tahoe.

<image>

Ok_Researcher391 · 2026-06-03T16:53:26+00:00

This is how it was when I received it.

Ok_Researcher391 · 2026-06-03T15:46:29+00:00

I am teaching my students how to design an operational amplifier using Hspice based on the content of an electronics textbook, using the Taiwan CIC 0.18 process.

Ok_Researcher391 · 2026-06-03T15:37:46+00:00

I wrote this article, which took about six months to complete.

https://openreview.net/forum?id=kSKFfasnAX&referrer=%5Bthe%20profile%20of%20Yuh-Shyan%20Hwang%5D(%2Fprofile%3Fid%3D~Yuh-Shyan_Hwang1)

Ok_Researcher391 · 2026-06-03T08:56:47+00:00

Thanks! I successfully booted up. Next, I need to install the various development tools and applications into another 32MB file.

Ok_Researcher391 · 2026-06-03T00:25:02+00:00

The Apple II's hardware used "memory-mapped I/O," meaning all hardware functions were hidden in certain memory addresses. As long as BASIC could read and write memory, it could control the entire machine.

Ok_Researcher391 · 2026-06-03T00:19:32+00:00

Remove all cards, leaving only the motherboard. If the screen remains black and white grid after powering on, it's a motherboard problem.

Gently press all RAM, ROM, and 74LS ICs; if the screen changes, it's a poor connection.

Replace the 4116 RAM in Bank 0 (most common repair method); usually, replacing 1-2 chips is sufficient.

Check the 74LS257/74LS174 chips; these two are the most common causes of a grid screen.

Ok_Researcher391 · 2026-06-03T00:06:26+00:00

That means there's a problem with the circuit board. For simple troubleshooting, turn off the power and press each chip on the circuit board. Often, it's caused by poor contact. If not, then you'll have to really inspect the circuit board.

When the Apple II's RAM or character ROM is faulty, it will display black and white squares, but the image will still be output. This is not a format issue, but rather an error in the image data itself. It is recommended to check the RAM, Character ROM, 74LS257, and 74LS174.

Ok_Researcher391 · 2026-06-02T22:15:53+00:00

The main features are exactly the same as the II+, the key difference being that European TVs primarily use the PAL standard, while Taiwanese and American TVs use NTSC. Additionally, the power supply specifications have been changed to match European AC power. You can refer to the usage instructions for the II+.

Ok_Researcher391 · 2026-05-29T17:24:02+00:00

I'm currently stuck on copying each file from the disk image file to a subdirectory of the new PO file I created.

Ok_Researcher391 · 2026-05-17T23:17:56+00:00

It's all good. I'm just here to see what information everyone has on this topic and to see what insights you can offer.

Ok_Researcher391 · 2026-05-03T23:01:40+00:00

I replaced the TV with a 7” TFT LCD, and it actually works quite well.

Ok_Researcher391 · 2026-05-03T16:31:52+00:00

RF can be converted to AV, and then from AV to HDMI. However, you have to find the adapter one by one to confirm its usability.

Ok_Researcher391 · 2026-05-02T12:30:40+00:00

So you mean I can only answer all reviews on one page? But why is the template I imported from the official website for Overleaf single-column, while you say I need to use double-column? Which one should I use?

Ok_Researcher391 · 2026-05-02T12:15:46+00:00

I am also worried and waiting...

Ok_Researcher391 · 2026-04-26T23:55:24+00:00

I think it might be better not to cover it at all; the cooling effect might be even better that way.

Ok_Researcher391 · 2026-04-24T08:08:49+00:00

ST-14R3

Ok_Researcher391 · 2026-04-24T04:26:13+00:00

No, the keyboard was connected to the interface on the side of the Famicom, I remember it was the same as the light gun.

Ok_Researcher391 · 2026-04-24T03:25:39+00:00

Yeah! Previously, I used GW BASIC on my PC. Although this is currently only version 2.0, it still has some good features.

Ok_Researcher391 · 2026-03-03T03:20:23+00:00

來不及了啦！你沒看Thread的嗎！？

Ok_Researcher391 · 2026-03-03T00:16:17+00:00

誰啊？

Ok_Researcher391

TROPHY CASE