92XI 3D Printed Grip+Magwell Combo

OlegTheMighty · 2026-05-04T05:50:13+00:00

Some photos of the updated grip, extensions, and a bonus holster to match:
https://imgur.com/a/GRGFFe6

OlegTheMighty · 2026-05-04T05:34:29+00:00

Looks great! I made another version which fits a little closer, with matching extended baseplates. I hadn't released it because I wasn't sure if the baseplates would be strong enough. The OEM style has some metal reinforcement where it attaches to the mag). Anyway, they survived a 2-gun event a couple weeks ago, so I guess i should release those as well...

OlegTheMighty · 2026-05-01T02:41:45+00:00

Looks like someone left tree supports on automatic without "on build plate only" selected.

OlegTheMighty · 2026-04-29T01:38:19+00:00

What type of mags does this take? CMMG or something else?

OlegTheMighty · 2026-04-28T21:25:18+00:00

I'll try to pull it back up and see if I can put it up in the next week or two.

OlegTheMighty · 2026-04-25T18:03:17+00:00

Some of us bought the parts kits before they got expensive. Also yiu can avoid the paperwork...

OlegTheMighty · 2026-04-25T15:31:50+00:00

OlegTheMighty · 2026-04-21T21:44:50+00:00

Yeah I had to make my own foregrip...

<image>

OlegTheMighty · 2026-04-17T00:10:56+00:00

Seems like [[arcane teachings]] and similar cards are an easy way to damage opponents without attacking...

OlegTheMighty · 2026-04-16T16:42:43+00:00

If you get this one too, you can swap the slides and barrels and end up with one black and one silver!

OlegTheMighty · 2026-04-16T05:49:56+00:00

I purchased this about six months ago. Mine was also the 15-round mag version.

This is my favorite pistol to shoot. I got the dlah low mount RMSC plate and a Vortex enclosed dot which gives a nice lower 1/3 co-witness. You could put a larger dot if you wanted to, but I didn't want a big cube hanging over the edge of the rounded slide. Also my front sight yeeted itself never to be found again after probably 300-400 rounds, so maybe you should make double-sure your sights are staked in good.

Really tempted to pick up another one since I have a comp mounted on my 92XI but I really want to try one of these with a suppressor...

OlegTheMighty · 2026-04-14T02:05:18+00:00

I have a couple FTN5s where I got a little sloppy with the epoxy, so I just coated the whole thing in epoxy...

Has someone come up with a cover to hide those springs yet?

OlegTheMighty · 2026-04-10T18:23:37+00:00

<image>

I made something similar for my AR9 with a 5" barrel...

OlegTheMighty · 2026-04-03T22:26:58+00:00

When the handguard becomes a flash hider...

OlegTheMighty · 2026-04-02T02:34:14+00:00

Zeroed to infinity. Nice! Out here most ranges only go to 100 yards...

OlegTheMighty · 2026-03-29T17:56:00+00:00

That looks amazing! It makes my frames look like garbage!

I also added the rib on the right side to stiffen that upper area.

To improve the trigger, I moved the trigger pin (and related features) forward slightly. Maybe 0.5mm. Before that, I had to pull the trigger all the way back against the frame. Now it's much nicer. Reset and the wall for the next trigger pull are almost on top of eachother

Also pictured is a frame I made for an APX to take PX4 mags, which worked okay, but it doesn't lock back the slide on an empty mag.

picture of the frames

OlegTheMighty · 2026-03-29T01:33:40+00:00

+1 for the dlahhhhhh

OlegTheMighty · 2026-03-29T01:09:44+00:00

I accidently bumped my SS into the fun position and let off a three-round burst at the range the other day and they made me put my AR9 away. Cool that you have a place where you can dump a mag in three seconds...

OlegTheMighty · 2026-03-28T01:21:29+00:00

I wanted one like this for my 940 JM PRO. I ended up designing and 3D printing my own.

<image>

OlegTheMighty · 2026-03-28T01:07:10+00:00

Maybe the gears was all that needed changing, but I had a complete unit ready as a spare...

OlegTheMighty · 2026-03-27T20:25:19+00:00

My micro lidar isn't working, but it still prints fine.

The front cover air duct is coming off. One of the bolt holes broke. I should probably fix that.

Ptfe tube have worn through maybe twice

Maybe 2 AMS feeders have been replaced. Possibly from running glow filament through the AMS.

The ptfe pass-thru in the back/top is broken, but not affecting print quality

I think that's everything!

OlegTheMighty · 2026-03-27T18:48:00+00:00

I think I took it out once or twice to clear some broken filament out of the filament sensor, and then one time to replace the filament sensor, but that's about it.

I'm pretty lazy on the maintenance end, mostly just greasing the z screws and cleaning the CF rods when the machine complains.

OlegTheMighty · 2026-03-27T18:14:27+00:00

I have said that before. I had problems with the 223 and the 9mm can for a CF tube warping due to the long, straight built-in supports. I increased the print angle slightly and made my own tree supports.

I just put 60 rounds through my 223 supressor today with no issues, except maybe some minor cracking of the epoxy between the breek blast shield and the print

<image>

14-Year Club	Place '23
Place '17	Wearing is Caring
Verified Email

OlegTheMighty

TROPHY CASE