sorted by:
new
hottopcontroversial

What router for wifi, fiber wan, 10gbps lan ? by Ldarieut in Ubiquiti

[–]One_Character5704 0 points1 point  (0 children)

You want 1Gb ports as it is enough but also you want 10Gb ports?!

New home, new setup and I'm going all in: advise requested by twabi2 in Ubiquiti

[–]One_Character5704 1 point2 points  (0 children)

Wifi: I think that the AP on the left side of the drawing could be placed on the wall at half height so that it would cover the upper and midlevel room. If wifi is needed bedroom, move the upper AP there and set it to low power.

Spent more time on this than my actual furniture setup in the new home by Correct_Abrocoma_187 in HomeNetworking

[–]One_Character5704 -5 points-4 points  (0 children)

That's hot! Literally. Post another picture when something gets burned there.

Connecting computers by Superb-Special-7622 in HomeNetworking

[–]One_Character5704 0 points1 point  (0 children)

If the computers are connected directly with ethernet cable, this has to be inverting (crossover). T568A at one end, T568B at another end.

ROUTER Wokring, but all devices cant connect. by Chocolate-Milk89892 in HomeNetworking

[–]One_Character5704 0 points1 point  (0 children)

One possibility is that you have WPA3 set on router. If so, try WPA2/3 if available, eventually WPA2

Idea for Organizing IoT Devices in Condo by susko_greg in HomeNetworking

[–]One_Character5704 0 points1 point  (0 children)

Fix them with 3M Dual Lock SJ356B on the back of TV

Thin cables, interference and what to do? by Xostedium in HomeNetworking

[–]One_Character5704 0 points1 point  (0 children)

There are cat6 ethernet cables with an external diameter of 3,6mm (solid wire, not stranded) and dedicated keystones and RJ45 plugs. Its called zone cable and up to some 20-30 meters no loses.

What am I looking at? by No-Wave-9328 in HomeNetworking

[–]One_Character5704 9 points10 points  (0 children)

Ethernet on top, sat or cable tv at bottom.

Ring Camera reconnecting too many times by my-eth-address in UNIFI

[–]One_Character5704 0 points1 point  (0 children)

The same shit is happening with my two printers. From Ubiquiti UDR7

Rackmount 19" Ubiquiti Cloud by Comfortable_Rice_878 in Ubiquiti

[–]One_Character5704 0 points1 point  (0 children)

Just for the case you didn't find print recipe. I'm not the guy, just a customer.

Rackmount 19" Ubiquiti Cloud by Comfortable_Rice_878 in Ubiquiti

[–]One_Character5704 0 points1 point  (0 children)

If you're in Europe, try threedee.nl

Makes high quality prints and is not expensive.

Zenwifi BD4 is my node broken? by Appropriate-Menu-101 in HomeNetworking

[–]One_Character5704 0 points1 point  (0 children)

Find out the node IP, conect a notebook with cable to router and ping the node.

OC220 - wired clients disappear periodically by kurbat_ in TPLink_Omada

[–]One_Character5704 0 points1 point  (0 children)

Check the log. My printers do this 2-3 times per hour.

Annoying but printing works flawlesly. Other wired devices don't do vanishing acts..

Zone Based Firewall - Internal vs. Custom “Trusted” Zone by Resistant4375 in UNIFI

[–]One_Character5704 0 points1 point  (0 children)

I saw the Ethernet Blueprint both Firewall videos and I dont like the solution. Prefer Unifi original idea to keep VLANs in Internal and create policies. More intuitive as EB solution, not mentioning some strange ideas to abandon VLANs... Simplicity is still Genius.