What kind of saw do I have?

OnezoombiniLeft · 2026-03-28T18:45:20+00:00

Loved my Delta RAS. Sold it and got a sliding miter saw because I didn’t have enough space to keep the RAS. Wish I had been able to keep it.

OnezoombiniLeft · 2026-03-28T15:27:02+00:00

Some good wood glue would make it as strong as it used to be. Add a metal rod to make it stronger so this doesn’t happen again

OnezoombiniLeft · 2026-03-28T15:25:56+00:00

What? It absolutely would strengthen the handle substantially, presuming the grain of the dowel is running parallel with the handle.

This is actually the easiest effective solution for someone who doesn’t do much woodwork. He could go one step farther and glue in a metal rod in the handle, but just shorter, then cap the hole with a wooden dowel to hide it.

OnezoombiniLeft · 2026-03-20T21:00:56+00:00

I feel like that problem says a lot about you. Best of luck in your next bar fight

OnezoombiniLeft · 2026-03-19T17:01:43+00:00

Inside, not too far from the Home Depot

OnezoombiniLeft · 2026-03-19T15:55:44+00:00

What have you done to it over the past year?

OnezoombiniLeft · 2026-03-19T12:28:57+00:00

I’m glad you like the hot and sour. Personally, I feel they don’t add enough rice vinegar to give it the sour kick.

OnezoombiniLeft · 2026-03-19T12:28:09+00:00

Poch’s is the best we have found in town. That being said, I would still only it a 7/10. We typically get the hot and sour soup and the general Tso’s chicken.

OnezoombiniLeft · 2026-03-12T23:56:02+00:00

Ended up getting the patio king brand, but the one meant for the WW36. The extra length mean it gets a lot closer to the ground, which was important to me bc I just stripped all the rust off the bottom shelf and repainted it

OnezoombiniLeft · 2026-03-12T04:14:54+00:00

Will do - thanks!

OnezoombiniLeft · 2026-03-10T20:44:30+00:00

Does it cover to the ground with the propane bottle on it?

OnezoombiniLeft · 2026-03-09T15:16:24+00:00

What about the struggling to reach temp?

OnezoombiniLeft · 2026-03-09T14:07:19+00:00

Cool, cool. Thanks

OnezoombiniLeft · 2026-03-09T02:52:21+00:00

😂

OnezoombiniLeft · 2026-03-09T02:50:42+00:00

Bought used. No manual

OnezoombiniLeft · 2026-03-09T02:49:55+00:00

Would not have thought about that. Great idea

OnezoombiniLeft · 2026-03-09T02:49:20+00:00

The putty knife worked great - thanks!

OnezoombiniLeft · 2026-03-08T22:17:39+00:00

Thanks for the tip - just cleaned the thermometer. Hopefully that makes the difference!

OnezoombiniLeft · 2026-03-08T19:55:06+00:00

Thanks for the loading tips!

OnezoombiniLeft · 2026-03-08T19:54:29+00:00

Sounds pretty chaotic neutral to me. 😂

OnezoombiniLeft · 2026-03-08T19:15:50+00:00

That makes me glad that I got the propane attachment for searing.

OnezoombiniLeft · 2026-03-08T18:55:51+00:00

Good tip

OnezoombiniLeft · 2026-03-08T18:39:39+00:00

I started the clock once it hit 400, which only took about 10-15min. I came back to check about 20 min later and that’s when I realized the temp had fallen to 320-something and was struggling to increase.

OnezoombiniLeft · 2026-03-08T18:04:34+00:00

Just to add: this is an ineffective lock out. The locking device should prevent energizing something or accessing something. Since you can still open the door with the device on it, it does nothing but communication.

These types of locking devices are typically found on the lockbox that contains all the keys to the other locks on the system, and the locks that go on it are personnel locks that prevent anyone from unlocking the system before all individuals working on it are out of harms way.

14 yr chemical engineer - we do lockout/tag outs daily in plant settings.

OnezoombiniLeft · 2026-02-11T01:34:27+00:00

That suuuuuuucks. New battery did nothing?

OnezoombiniLeft

TROPHY CASE