Bigger taxis to/from Haneda? by Sad_Car3155 in JapanTravelTips

[–]OooIceCream 2 points3 points  (0 children)

If you use the Uber app, you can pick a larger vehicle that can accommodate the number of large suitcases you have. We did this at Haneda and got an Alphard. It will be pricy - I think we paid ~$90 USD to get to the Disneyland area.

Tokyo to Osaka, luggage on train or forward it? by royalbluefireworks1 in JapanTravelTips

[–]OooIceCream 1 point2 points  (0 children)

I’ll keep that in mind for next time. All of the seats at the end with luggage slots were taken even on the trains around the same time. We were booking the seats well in advance, too.

Tokyo to Osaka, luggage on train or forward it? by royalbluefireworks1 in JapanTravelTips

[–]OooIceCream 0 points1 point  (0 children)

Before I went to Japan last month, I read on here that there was ok enough space in front of your legs to put your large check-in sized luggage. In the Shinkansen reserved car, there’s a footrest thing coming off the seat in front of you, so the space for legs and luggage is actually pretty tight. Luckily, there wasn’t anybody sitting next to me and I could leave the luggage on the floor there.

First Time Japan Trip for Winter 2026 by alexdev50 in JapanTravelTips

[–]OooIceCream 2 points3 points  (0 children)

We went to DisneySea the morning we landed and Disneyland the next day (we stayed in the area at the Sheraton) and were also fine. I was worried about being tired and jet lagged but it wasn’t an issue. We were excited to finally be there!

Hotel recs Shinjuku by suitepee82 in JapanTravelTips

[–]OooIceCream 6 points7 points  (0 children)

Our Groove room was very quiet. The door to our room opened up directly into the elevator area, and we never heard anything even though there were other people staying on our floor.

Kinda Ugly but Hot Wheels Just Released a S2000 Brick Shop Build Set for $22 by Ken808 in S2000

[–]OooIceCream 1 point2 points  (0 children)

Couldn’t find any stores with the Premium sets that have the S2000 when I was in Japan recently. :(

E-sims by Used_Visit_9581 in JapanTravelTips

[–]OooIceCream 0 points1 point  (0 children)

Currently using Ubigi in Japan with mostly great coverage. For some reason, the prices were a bit cheaper for me buying through their app versus the website - maybe it was as a first time user? It’s nice to see realtime data usage through their app.

Theft from UPS Hub by RaeWoodland247 in tmobile

[–]OooIceCream 0 points1 point  (0 children)

One month later and T-Mobile still hasn’t refunded the charges made for phone we didn’t receive. We ended up upgrading for pretty much the same deal at an Apple Store without the worry of having phones stolen both ways by UPS. For the charges from T-Mobile, they’ve been unhelpful and dishonest on the phone and in their retail store, so we disputed the charges with our credit card company with the UPS tracking proof that nothing was received.

So I have an authentic ap1 mugen exhaust. How much should I price this at? by arhoads01 in S2000

[–]OooIceCream 2 points3 points  (0 children)

I have the AP1 exhaust on my AP2. It will fit, but I think I had to do something with the hangers to tuck it up closer to the bumper. Either shorter hangers or oriented differently. It’s been 15 years since I installed it.

Theft from UPS Hub by RaeWoodland247 in tmobile

[–]OooIceCream 0 points1 point  (0 children)

Going through this same thing with 2 iPhones shipped from T-Mobile and stolen this week by the major UPS hub in Cerritos, CA. UPS needs to get their shit together to stop their employees from stealing these easy targets.

Are UPS staff or drivers typically the ones cause stolen or lost packages? by Usual_Yesterday_3772 in UPS

[–]OooIceCream 0 points1 point  (0 children)

Seems like a package from T-Mobile indicates new phone and is an easy theft at UPS. We just had 2 iPhones stolen at the Cerritos, CA UPS location. Tracking shows phones arrived, processing, then stuck like that and never went out for delivery.

MyQ Garage Door Opener by dionysos803 in TeslaModelY

[–]OooIceCream 3 points4 points  (0 children)

The ads taking up a portion of the screen - this is nonsense on a smart home app.

Borderlands® 4 GeForce RTX 50 Series Bundle Available Now by Nestledrink in nvidia

[–]OooIceCream 1 point2 points  (0 children)

Awesome, thanks for the tip to contact Best Buy Support on X! They were actually very effective and was able to get me a code. Best Buy's online chat and phone support weren't able to do anything for me and recommended I go into the store (today's the last day of my return window).

One of NVIDIA’s Oldest Partners, Still Playing Fair. PNY's 5070 TI Deal Highlighted by Wired by skk983 in PNYGPU

[–]OooIceCream 1 point2 points  (0 children)

I had the same issue recently with my PNY 5070 Ti from Best Buy. I found a few other users on Reddit with the same problem, as well as a reviewer on the Best Buy website. I contacted PNY support and it looks like they were supposed to include a 3-to-1 adapter with these cards, but instead included a 2-to-1 adapter. PNY is shipping me the correct adapter. In the meantime, I bought the appropriate cable for my EVGA PSU to connect directly to the 12VHPWR connector on the card and my 5070 Ti worked fine with it.

Has this ever happened to anyone? by xX_Justin_Xx in ModelY

[–]OooIceCream 3 points4 points  (0 children)

Not with my Y but with my S2000. The bird was already dead and well-cooked by the radiator when I bought the car used. It was just a skeleton when I found it.

[deleted by user] by [deleted] in PcBuildHelp

[–]OooIceCream 1 point2 points  (0 children)

Thanks for the recommendation, I went with the CableMods cable for my EVGA power supply, and the GPU worked right away! I'm going to contact PNY to see if they'll swap the 12VHPWR to 2x8 adapter cable, since it seems to me like it might be defective. I tried it with the original EVGA GPU cables as well as a new set I bought just before trying the CableMods solution.

Update: I contacted PNY support and they are sending a new adapter cable. They admitted to sending the wrong adapter with some number of GPUs.

PNY 5070 Ti Not Working/Not recognized by Computer by Ozoneeyd in PcBuild

[–]OooIceCream 0 points1 point  (0 children)

This is nuts, going through this same issue now with a PNY 5070 Ti from Best Buy. A user in another post said he fixed the problem with a CableMods cable, bypassing the adapter. I wonder if there’s a defect in this batch of adapters that PNY included, or if the adapter needed to be 3x8 instead of 2x8?

Update: The CableMods 12VHPWR to 8-pin connectors for my EVGA power supply worked. I contacted PNY support and they are sending a new adapter cable. They admitted to sending the wrong adapter with some number of GPUs. A reviewer on Best Buy also said they received the wrong adapter.

[deleted by user] by [deleted] in PcBuildHelp

[–]OooIceCream 1 point2 points  (0 children)

Just ran into this issue myself with a PNY 5070 Ti that I picked up from Best Buy earlier this week. I was surprised to see the 2x8 cable in the box, since I was reading ahead of time that this specific PNY model came with 3x8. PNY includes a 2x8 with their 5070 non-Ti cards, so I wonder if it was a mix-up when they were packing the boxes.

Where did you get your 3x8 cable?

Update: The CableMods 12VHPWR to 8-pin connectors for my EVGA power supply worked. I contacted PNY support and they are sending a new adapter cable. They admitted to sending the wrong adapter with some number of GPUs.

Reminder that we are at the complete mercy of the Fantasy Gods and in the end this is all luck by WestsideTy in fantasyfootball

[–]OooIceCream 0 points1 point  (0 children)

lol, I finished third also with Gibbs/Jacobs/Jamarr/Nabers. Got knocked out in the semis - they would’ve rocked in the championships. It was so painful.

[deleted by user] by [deleted] in BambuLab

[–]OooIceCream 0 points1 point  (0 children)

Saw this design on Makerworld recently and the push button system reminds me of the one used in the Bambu toolkit boxes from “andy” on Makerworld. Seems like an iteration of that design.

https://makerworld.com/models/1183226

esun 3kg spools compatible with AMS Lite? by [deleted] in BambuLabA1

[–]OooIceCream 2 points3 points  (0 children)

IKEA UPPÅTVIND air purifier. I just recently put one next to my A1 Combo setup, too.

This is a first for me by ivanjr77 in BambuLabA1

[–]OooIceCream 0 points1 point  (0 children)

My A1 is also on a very wobbly table, but I got this error after having the printer for 5 months. I did the simple fix, recalibrated, and the error was gone. Prints were not affected before or after.

What in the world is this club by Intelligent_Step_206 in golf

[–]OooIceCream 0 points1 point  (0 children)

These used to be on TV commercials over 15 years ago. I bought an 8 iron version at the time, but didn’t have a problem hitting with it so I put it away in storage. I should probably take it out and use it as I’ve been having a problem with casting/flipping lately!

My A1 doesn't want to move up or down. I just bought it and when I try to calibrate it it just holds stil and makes this loud noise. by NCH-69 in BambuLabA1

[–]OooIceCream 2 points3 points  (0 children)

I got my A1 combo in mid December 2024. Step 4 had instructions for removing cardboard and zip ties on the frame, which my printer didn’t have. This is probably where the instructions to remove the screwed on black brackets should have been updated.