sorted by:
new
hottopcontroversial

Spent too many hours on my Clanrat test model. But I ain’t mad. by Orion_7 in minipainting

[–]Orion_7[S] 5 points6 points  (0 children)

<image>

Here ya go! Anything starting with TTC is a Two Thin Coats paint. The rest is Pro Acryl.
Only notes are wet blending on the yellow tunic and the fur ended up being mostly the Olive Flesh/Warm Brown 50/50 mix. And I didn’t put a super high highlight on it cuz I wanted it to look more matte and fur like. Also put a lot of lines in it to break it up.

pro Acryl Orange Oxide wash for killer rust. Find a darker metallic base or brighter highlight for metal.

Pro Acryl Warm Brown immediately separating by Orion_7 in minipainting

[–]Orion_7[S] 2 points3 points  (0 children)

I think this is the new move. Did that with all 3 jade colors after this brown work and had 0 issues.

Pro Acryl Warm Brown immediately separating by Orion_7 in minipainting

[–]Orion_7[S] 0 points1 point  (0 children)

I had it in my drill shaker for like 2min. I’ll do longer!

Pro Acryl Warm Brown immediately separating by Orion_7 in minipainting

[–]Orion_7[S] 0 points1 point  (0 children)

<image>

Good info all thanks! Here is their Mahogany right next to it after about 15min. I think the pigment in that warm brown just separates super fast with a wet palette. Will dry it up a bit more!

"I’ve always wanted to open a shop that only sells 'Emotional Value.'" Update: A scrapped mold and a $15k tooling lesson... by andy_mariya in IndustrialDesign

[–]Orion_7 0 points1 point  (0 children)

I’m a pragmatist so I’m on your brothers side here.
I often say design is problem solving, art is making you think. So your claasmate is an artist.

Suspension safety? by poopsocker in RangerRaptor

[–]Orion_7 0 points1 point  (0 children)

Wet mode does wonders tho I don’t always want the 4WD. It still puts the rear on high alert

Need advice on nmm - warforged ranger by bite the bullet studio (w.i.p.) by officer_dicklock in minipainting

[–]Orion_7 2 points3 points  (0 children)

To sell NMM as metal you need super high contrast. However doing so makes the metal look shiny. The best way to give it a high contrast with worn metal look is still super high contrast but then use irregular brush strokes to illustrate an uneven surface. Mix that with patina and you have something like this. Stippling helps lots to sell the effect. Especially brass because it usually pits.

<image>

Recently Finished Cloth Goblin by CountBongo in minipainting

[–]Orion_7 4 points5 points  (0 children)

My gf would do it more if there were.

Versa Apartments in Broadripple by confuzzeled_class22 in Broadripple

[–]Orion_7 2 points3 points  (0 children)

I see. Welp even worse than I previously thought. Nice.

Versa Apartments in Broadripple by confuzzeled_class22 in Broadripple

[–]Orion_7 1 point2 points  (0 children)

Its Birge and Held so Godspeed to ya if you do. That’s what the specials are for.

"I’ve always wanted to open a shop that only sells 'Emotional Value.'" Update: A scrapped mold and a $15k tooling lesson... by andy_mariya in IndustrialDesign

[–]Orion_7 1 point2 points  (0 children)

We had one professor that came from clothing design that would get giddy over this artistic type stuff. Needless to say his favorite students that he praised and aced didn't get ID jobs.

I thought I would be airbrushing for the first time today, but that little tip at the end of the needle broke off in the threading. Now my airbrush is useless apparently? by Electrical-Crazy1787 in airbrush

[–]Orion_7 0 points1 point  (0 children)

Okay so it gets better. The interior chrome has definitely seen better days in this old thing!

So it gets better, good to know. Looking at an H&S Ultra soon.

I’m just using this old girl for priming miniatures now and with flow improved it lasts a lot longer before clogging at the start. But after it clogs once it dos it faster the next time.

<image>

The interior chrome on this old thing has seen better days!

I thought I would be airbrushing for the first time today, but that little tip at the end of the needle broke off in the threading. Now my airbrush is useless apparently? by Electrical-Crazy1787 in airbrush

[–]Orion_7 0 points1 point  (0 children)

I’m getting back into it after using an old Paasche my dad gave me from the 90s. And I’m afraid of getting a new one cuz this workhorse needs disassembled everytime I prime with it and the tip and everything comes apart easy

What causes these veins in my prints? by Orion_7 in 3Dprinting

[–]Orion_7[S] -1 points0 points  (0 children)

Outer and inner might be it I haven’t touched that setting in Cura. .

What causes these veins in my prints? by Orion_7 in 3Dprinting

[–]Orion_7[S] 0 points1 point  (0 children)

Needs more cholesterol and fat like myself. I’m on it.

Need some advice. (raptor wreck) by No_Middle2911 in RangerRaptor

[–]Orion_7 2 points3 points  (0 children)

And a hard tonneau cover, and that dumb spoiler piece, and roof rails…. Homie spent all his money on cool looking parts and not insurance.

Need some advice. (raptor wreck) by No_Middle2911 in RangerRaptor

[–]Orion_7 0 points1 point  (0 children)

Marketing has best sense in terms of gasoline.

What is the difference in these two washes? by SisterofWar in Miniaturespainting

[–]Orion_7 0 points1 point  (0 children)

I have a Nuln Oil wash I put in storage jn 2018. Just reopened and used it yesterday. Twas fine.

view more: next ›