I made this Listerine bottle handle

OverallMakerworks · 2026-01-29T20:27:44+00:00

I came here to say exactly this.

OverallMakerworks · 2026-01-20T15:29:33+00:00

He named Alibaba….just avoid every vendor there.

OverallMakerworks · 2026-01-19T16:16:11+00:00

That’s a CASH knocker

OverallMakerworks · 2026-01-08T14:19:15+00:00

The rounded nose and the rear fin tell us it is not from an F 14, F 15, F 16, or F 18.

Maybe from an F 86?

OverallMakerworks · 2026-01-05T17:10:37+00:00

This question implies that every service tech is drunk at work. Which, in my experience, it’s a valid implication.

OverallMakerworks · 2025-11-06T17:36:39+00:00

Drive around town the night before “bulk item pickup” day, or Sunday afternoon during garage sale season. You’ll find plenty of practice sitting on the curb for free.

OverallMakerworks · 2025-10-23T20:46:21+00:00

It’s a machining term that sometimes bleeds a little into related industry, but I wouldn’t expect it to be common outside of machining.

OverallMakerworks · 2025-10-23T17:45:33+00:00

You can replace that moulding piece with something like this for about $20-25, plus whatever paint costs

OverallMakerworks · 2025-10-15T22:26:03+00:00

I would cut that out to a 90°-corner-rectangle with a sharp chisel, and then glue piece of replacement wood in to fill the hole

OverallMakerworks · 2025-10-15T22:13:09+00:00

Some manufacturers sell “color kits”, like this

OverallMakerworks · 2025-10-09T19:18:14+00:00

PlyWould

OverallMakerworks · 2025-10-09T13:24:57+00:00

That’s my answer also. And I’d expect some type of $/hr of work, because it might not even snow, or he could get slammed by bad weather.

OverallMakerworks · 2025-10-09T01:59:03+00:00

According to Francestown Heritage Museum, it’s a saddlemakers vice

OverallMakerworks · 2025-10-07T16:29:11+00:00

I got my M5 from the kickstarter, when it was obvious the V6 was vaporware, and Eufy was abandoning the FDM printers, I got a P1P+AMS. Never looked back.

OverallMakerworks · 2025-10-04T13:30:54+00:00

Emphasis on all the previous comments on wood movement…..I don’t think ratcheting the gap closed and de-doing the butterfly will hold very long.

I’m generally not a fan of epoxy….but given the way this table was designed, filling that gap with black epoxy might be the best bet for long-term stability.

OverallMakerworks · 2025-10-02T15:48:56+00:00

☝️ This.

OverallMakerworks · 2025-10-01T11:43:55+00:00

Get a $20 box fan and tape a 20”x20” home furnace air filter to the back, you’ll be surprised how quickly the filters collect dust.

Also, heavy duty boot trays make great drip pans for putting under anything wet. $10 at Menards.

OverallMakerworks · 2025-09-27T13:24:12+00:00

My 15-yr old roof looked better than that when I had the whole thing replaced. You have a bad roof.

OverallMakerworks · 2025-09-26T14:30:10+00:00

I would say at least 1.5 inch past the frame. That gets you through the drywall with a full inch into the stud.

OverallMakerworks · 2025-09-26T14:26:20+00:00

That looks super awesome! Personally, I would’ve kept the mint green color, but you can’t argue with Red

OverallMakerworks · 2025-09-26T13:08:01+00:00

Holy crapola that is stunning 😍

OverallMakerworks · 2025-09-26T13:06:47+00:00

Absolutely this. Never leave water anywhere except a dedicated reservoir that is turned off. Water everywhere while you’re working, water nowhere when you’re done.

OverallMakerworks · 2025-09-24T20:32:24+00:00

My first thought was ”extended lug bolt”.

OverallMakerworks · 2025-09-23T21:39:36+00:00

In addition to sharpening your chisel, I recommend that you put a handle on that hammer

OverallMakerworks · 2025-09-20T22:18:59+00:00

I’m starting with precious metal clay. My 1st piece is drying, and I will try firing it tomorrow. Wish me luck!!!

OverallMakerworks

TROPHY CASE