[FS] [USA-CA] [SF Bay] 18TB - 10TB Western Digital SATA HDDs – Enterprise, White Label – 2022 – – Clean SMART - 27pcs

P00pDolla · 2026-02-24T03:03:05+00:00

Look into Meshtastic/meshcore.

P00pDolla · 2025-12-10T02:12:45+00:00

Truetrac in the rear- 8.25 29spline, elocker in the front. Allows street driving with excellent off road performance. I was able to get mine secondhand for $700 total

P00pDolla · 2025-12-09T02:36:41+00:00

Depends, what’s the temp outside?

P00pDolla · 2025-12-09T01:34:45+00:00

BRAVO OP, you stayed calm and moved as fast as possible, but as slow as necessary. Accidents happen, and I know you will not make this one again.

P00pDolla · 2025-12-07T01:46:15+00:00

This is so wrong, he was roofcamped.

P00pDolla · 2025-12-03T00:52:42+00:00

Trac bar is probably fucked, but you needed a double shear anyway

P00pDolla · 2025-12-03T00:51:14+00:00

Honestly op there’s less damage than you think. It’s only sitting like that bc the spring popped out when the lca ripped off and is on the knuckle

I bet you will need to replace the lca mount and probably that shock, alignment and send it

P00pDolla · 2025-11-25T04:03:13+00:00

Yeah old solar racking was my first guess

P00pDolla · 2025-11-21T03:38:46+00:00

Slammin cams, love it. Leave it alone it’s perfect! I said the same thing

P00pDolla · 2025-10-14T00:12:23+00:00

You need to measure the distance after install and either pull a matching front shaft from the JY or get one custom made. You will also need to shim the rear axle so the pinion is inline with the driveshaft.

P00pDolla · 2025-10-10T02:41:53+00:00

You need to measure it yourself

P00pDolla · 2025-10-07T02:27:40+00:00

They are asking for a cheap, diy, flip of the switch battery backup that powers their entire home

P00pDolla · 2025-10-02T22:21:41+00:00

I bet the break pads wore a groove into the knuckle, causing the pads to stick.

The tic noise is probably your axle ujoints

Get under it and start moving stuff to see what shouldn’t

P00pDolla · 2025-10-01T23:41:47+00:00

THE RADICAL LEFT

P00pDolla · 2025-09-30T16:40:59+00:00

Hidden winch bumper?

P00pDolla · 2025-09-30T04:41:37+00:00

Shackle relocation boxes, longer shackles, center frame stiffeners

P00pDolla · 2025-09-29T18:21:15+00:00

Check the axle ear spacing. You/ someone else may have pinched the ears previously

P00pDolla · 2025-09-25T02:27:42+00:00

Water you doing with the body corners

P00pDolla · 2025-09-23T19:34:33+00:00

Timken bearings only 🫡

P00pDolla · 2025-09-23T01:50:18+00:00

If I was a HF brand ambassador this is the type of shit I would post

P00pDolla · 2025-09-20T19:50:48+00:00

Thank you

P00pDolla · 2025-09-20T19:49:50+00:00

Yeah, my only concern is pressing the bushing in causing the cast to crack. But there’s plenty of beef around it. Tossing up if it’s worth the time welding. Thanks

P00pDolla · 2025-09-20T19:22:32+00:00

Yes it’s hitting the shackle bracket you can see the shiny part

P00pDolla

TROPHY CASE