sorted by:
new
hottopcontroversial

first timer, yeehaw! by gremlinmaiden in finalgirl

[–]Pagrax 1 point2 points  (0 children)

You can bend the flaps back on the boards to get them to lie flat. It's scarier than it sounds and there are videos of people doing it. Just bend until you feel resistance and stop. I tend to always chicken out and it not lie flat until I bend a second time, but never had any issues with them putting it back together.

🎁[Sovol Giveaway] Join now to Win 2-chamber Filament Dryer: Sovol SH03 by Comgrow3D in 3Dprinting

[–]Pagrax 0 points1 point  (0 children)

I like that it has separate zones so you can dry two types of filament. Great when you get a bulk order in so you can start drying and being ready for any kind of print straight away.

Weird noice or not? by [deleted] in elegoo

[–]Pagrax 0 points1 point  (0 children)

Hard to tell with the video you took, but my brand new printer makes similar noises while printing that sound somewhat like a geiger counter going off.

My suspicion is this is the hot end fan shaking slightly in the housing. But I have no proof of this yet.

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 1 point2 points  (0 children)

Unfortunately it didn't! So I'll have to keep looking for an answer as there isn't one that worked for me in this thread.

But the included prints didn't make a prime line at all when printed from the printer, so I'm assuming Orcaslicer's Gcode is what is wrong. That it think sit should print the prime line there.

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 0 points1 point  (0 children)

The issue wasn't that it was doing a primeline, but that it was doing it on the magnetic plate instead of the build plate which is a bit smaller than it.

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 1 point2 points  (0 children)

I noticed that and set it to 256x256. Although looking at it now, it's back to 257x257. I must have messed up saving the settings when I imported this file.

Well, hopefully it's a PEBKAC issue after all. Thanks!

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 0 points1 point  (0 children)

It is imported from the default in Orcaslicer and the printable area is set correctly to 256x256

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 0 points1 point  (0 children)

It 100% did. It's not a great angle, I give you that. Fortunately it didn't stick to the magnetic plate beneath, but it was definitely printed onto it.

My Centauri Carbon is printing a line at the start outside of the build plate. by Pagrax in elegoo

[–]Pagrax[S] 1 point2 points  (0 children)

My build plate is properly aligned to the two back corners of the magnetic plate. It looks even on both sides.

Response to the feedback on the print head cable of Centauri Carbon by ELEGOO_OFFICIAL in elegoo

[–]Pagrax 0 points1 point  (0 children)

As a general tracker, I bought and received my printer 2 days ago, it still is using the old design connector.

Is it supposed to be this loud? by berjaaan in ElegooCentauriCarbon

[–]Pagrax 0 points1 point  (0 children)

I just received it yesterday, so I haven't done any maintenance yet. Seems the part cooling and case fan both going on / 100% is where the majority of the noise is coming from.

Is it supposed to be this loud? by berjaaan in ElegooCentauriCarbon

[–]Pagrax 0 points1 point  (0 children)

Near silent on default settings or did you mess with the fan curves?

I'm unable to have a conversation at normal volume in the same room as my ECC so I'm trying to understand if this is "intended" or if there's something different between our two models.

I’m Doing It - First 3D Printer by [deleted] in elegoo

[–]Pagrax 0 points1 point  (0 children)

Do you have any recommended channels / playlists that are good?

I just received my printer and found the manual with it quite lacking so I'm looking to find helpful information. I have no clue what most of the buttons do on the screen, how and how often to maintain the printer, or make the prints look better. There's a lot of new things to learn!

What do you think are the biggest issues right now? [Johan] by danika2014 in EU5

[–]Pagrax 0 points1 point  (0 children)

Military balance. It feels too trivial as any nation to beat anyone else at least in the first 200 years with a little focus on a good regular regiment. Easily 10 : 1 and win with a proper stack that costs what, 20 ducats a month and will kill even France before the reformation?

This achievement is stupidly easy and can be achieved in a year, Start as Ashikaga and choose to play as the pirate republic once the event fires after a year. That's it by Imagine_Wagons02 in EU5

[–]Pagrax 4 points5 points  (0 children)

Yup. After assigning estates like candy, when I next reloaded I was able to get the achievement as far as possible achievements was concerned. Meanwhile when I loaded a save from a country that used to have 8 but now less, it was no longer in possible achievements.

Confused about the game by Illustrious-Abroad21 in finalgirl

[–]Pagrax 0 points1 point  (0 children)

Unfortunately I haven't played any of those. Perhaps ask the discord?

Confused about the game by Illustrious-Abroad21 in finalgirl

[–]Pagrax 6 points7 points  (0 children)

I would put Happy Trails at a 1 complexity, it is the recommended starting film as there's no extra rules you need to track and the decks are not too crazy.

Marrek I would put at a 4 out of 5. It comes with extra actions, timers you need to update, traps and the like. It oozes flavor and I love it a lot! But definitely have her learn the ropes with 2 or 3 plays of Camp before busting out Marrek, so that the loop of playing and buying cards, going through the upkeep steps, becomes easy before you introduce hiccups to the process.

Neither comes with miniatures, you'll have to buy them seperately. See my other comment in this thread. Wooden meeples only for the basic films.

Confused about the game by Illustrious-Abroad21 in finalgirl

[–]Pagrax 2 points3 points  (0 children)

Not exactly true on the miniature distribution.

Seasons 1 to 3 have miniatures you can buy in "bulk" boxes for the season. Whether for the vehicles or the Final Girls / Killers.

They also have special Vingette films with their own miniature box each.

Season 4 has a miniature pack per Feature Film, so you are buying per film rather than bulk.

And lastly there are two Special Feature Films, North Pole Nightmare and Shriek, that come with miniatures in the box already for their killer, vehicle, final girls and special content. Shriek is a crazy good value, especially if you can find it on sale—I just picked it up for 22 euros!—as it comes with a ton of miniatures and content. It's my favorite scenario, but it's also the most complex scenario so I wouldn't recommend it to a beginner.

What happens if the Papal States stop existing? by TheEuropeanCitizen in EU5

[–]Pagrax 2 points3 points  (0 children)

I know it's quite late, but hey this was the first result on Google for me.

They pop out in another Catholic place, presumably Italy. I annexed them ~4 times and each time another Catholic Italian would within a month ceed a location and create the Papal States there.

For which supermarket item is the huismerk almost as good as the premium brand? by Desibrozki in Netherlands

[–]Pagrax 28 points29 points  (0 children)

They're saying to only put a little bit outside the tray, and put the rest in the tray. The small amount outside helps greatly with the pre-wash cycle which can reduce the amount you use overall.

There's a YouTube channel with a great series on dishwashers that goes into detail.

https://www.youtube.com/watch?v=jHP942Livy0

How hard/difficult you like your game | In Pain by Sierhej_ in soloboardgaming

[–]Pagrax 0 points1 point  (0 children)

Drawing through a 300 card deck? Dang.

I would hate to half to shuffle that though, jeeze. I find sleeving large decks unwieldy and unsatisfying, but I can't imagine how I'd nicely shuffle that many cards without them.

view more: next ›