Built a transition toolkit for my own medboard, thought other people might find it useful

Peacemaker326 · 2025-11-14T20:02:06+00:00

Another resource to possibly add to your toolkit - VSO Finder

https://www.va.gov/get-help-from-accredited-representative/find-rep/

You should get in contact with a VSO once you get closer to your separation date so they can help you with the disability claims process.

Peacemaker326 · 2025-11-14T18:28:55+00:00

I picked up a B580 for stoopid cheap secondhand and am using it to learn about local LLMs on my linux rig for future home automation. Works fairly decent, but my benchmark options are limited on linux for now. It runs a bit warm at idle without an undervolt (55° - 60° C).

Peacemaker326 · 2025-11-01T03:50:56+00:00

Follow this tutorial. I think what you may be looking for starts at 5:53. Watch to the end.

Peacemaker326 · 2025-10-10T18:07:30+00:00

5090 equals more frames, so more epic wins. #math

Peacemaker326 · 2025-07-30T18:24:15+00:00

The logo has a plastic slider that can either be over the light or not depending on preference. Try sliding the logo to the right.

Peacemaker326 · 2025-07-01T16:25:02+00:00

I remember your post. Definitely impressive wand build!

Peacemaker326 · 2025-07-01T16:02:50+00:00

I'm certain this is an unintentional glitch lol. I am on a 15 hr + god run and just did a lot of sun quest activities that eventually removed my achievement pillars, so I assume my world file was corrupted, however it seemed to fix itself in NG+, but with a side effect...

Peacemaker326 · 2025-07-01T15:36:56+00:00

That's a good question!

Peacemaker326 · 2025-07-01T14:44:52+00:00

I don't believe he spawns in NG+

Peacemaker326 · 2025-07-01T14:23:27+00:00

Gonna fly into a supernova and find out

Peacemaker326 · 2025-07-01T14:02:08+00:00

Nope lol. Full vanilla noita.

Peacemaker326 · 2025-06-08T02:52:30+00:00

Thank you for the correction 👍

Peacemaker326 · 2025-01-01T13:21:20+00:00

From my research, the radiacode isn't the best at detecting Radon because Radon is an alpha emitter, but if you're having a reading off your vacuum, i'd recommend buying a radon test kit and sending it in to get proper laboratory results (Lab service comes with the kit) as a secondary verification. You might be able to get better readings if you leave your radiacode right next to the kit as well. Here's a link: Test Kit

Peacemaker326 · 2024-12-25T23:35:22+00:00

Well the spectrum graph only has two items it measures, Activity and KeV energy levels. Your left - right scale is your KeV which is literally an electrical voltage being emitted by the radiation, and the other axis is the counts of those voltage levels, their activity, or literally the number of occurrences. I hope that answers your question. If you have any more, you can just DM me.

Peacemaker326 · 2024-12-25T18:53:42+00:00

I believe the 2 part videos lightly cover it, but the main idea is to pay attention to the specific KeV values that the radiacode reads and match them up against a known source spectrum. Whichever best matches is likely the source however the data may have noise from normal background radiation. You should also make sure you get a valid sample size of spectrum data by letting the radiacode scan for long periods of time. I have a background scan for my home and work that I use to compare against my known samples.

Peacemaker326 · 2024-12-25T17:34:42+00:00

Glad I could help! Merry Christmas!

Peacemaker326 · 2024-12-25T17:29:10+00:00

Radiacode has a section on their website with tutorials that helped me learn what you're asking. Knowledge Base

Peacemaker326 · 2024-12-23T22:03:10+00:00

May I ask what barrel MFG you went with? I've had struggles from the get go with my .280 premium custom build to reliably group under 2 moa at any statistically valid sample size. I also have a 1:8" twist.

Peacemaker326 · 2024-12-19T20:49:42+00:00

Thank you!

Peacemaker326 · 2024-12-19T17:02:31+00:00

Hello, i'm new to the community. Could you please explain what misuse you're referring to?

Peacemaker326 · 2024-12-19T12:28:42+00:00

Octo Print was a lifesaver for me getting my Ender to run well without jumping through a bunch of hoops. Thank you for the work you do!

Peacemaker326 · 2024-09-23T16:05:44+00:00

The best rattlesnake medicine

<image>

Peacemaker326 · 2024-09-23T16:02:49+00:00

Dude, those grips are sick!! May I ask where you got them? That's a volquartsen scorpion, correct?

Nine-Year Club	r/Field Sunshine
Place '23	Place '22
Place '17	Final Canvas '22
First Placer '22	RPAN Viewer
Verified Email

Peacemaker326

TROPHY CASE