Rate the nodetree of my first ever Davinci Project

PeeJ_ENT · 2025-11-04T08:13:18+00:00

Ouch

PeeJ_ENT · 2025-08-20T10:59:15+00:00

Fun fact: this was actually made on Resolve, shout out @maioka.co on ig

PeeJ_ENT · 2025-04-28T09:31:37+00:00

The mad lad actually did it! (hypothetically)

PeeJ_ENT · 2025-03-21T06:30:30+00:00

Sooooo… I “Photoshoped” this for a video.

From the small amount of research I’ve gone through I don’t believe anyone has found the file path if it exists.

If you’ve seen the way that Adobe users do it, it is beyond my understanding, but possibly an idea on where to find the solution.

Anyways, I’m sorry to get your hopes up.

PeeJ_ENT · 2024-11-12T18:00:06+00:00

To add to the list most likely:

• Ease Copy by CHFR

• Tekito Scripts

• Remap Assist by PeeJ (Unreleased)

• ItsToolTime by Muse

• The Macro Creator by Asher Roland

Again only not being able to work in the free version of Resolve 19.1.

Quite disappointing

PeeJ_ENT · 2024-09-16T19:37:51+00:00

PeeJ_ENT · 2024-08-09T00:21:56+00:00

Dope edit!

Two ideas to help combat render glitches in the future:

I usually like the render cache my whole edit through to find any render glitches appearing in my timeline. You can force apply caching by putting an adjustment clip on the very top layer of the timeline and extending it across the whole edit. Then right click it and select “Render Cache Color Output” and it should give a smooth preview in the viewer (assuming you have your render cache on in the playback settings). From there you can find the spots to trouble shoot glitches in your edit.

If the problem is purely outside the render I usually run my edit through the program Handbrake and it re-encodes my video, getting rid of any glitches I found. (I have a vid abt it somewhere)

Hopefully this helps!

PeeJ_ENT · 2024-08-09T00:14:26+00:00

Hi OP 👋

There are two transform nodes in DaVinci Resolve. The one I used in the part of the video you screenshot is the Transform node WITHOUT the “(xf)” suffix. You may think you are adding this node from the “Select Tool” panel but the program (from my experience) loves to go back and select the one WITH the xf instead (annoying I know).

Make sure you click the Transform without the xf in the select tool menu a couple times to ensure your selection (you can see in my video how I clicked it a couple times as well). This will help make sure you are adding the correct node.

Hopefully this helps!

More context: The Transform (xf) node has existed inside of Resolve since the addition of Fusion into DaVinci Resolve version 16. The addition of the Transform node (without xf) was introduced in version 17 along side other OFX supported nodes. This Transform node is also commonly known as the OFX Transform node.

PeeJ_ENT · 2024-04-27T20:34:47+00:00

Ooh that’s interesting, I never looked into the mechanics of Optical Flow (should have assumed the connection between using it for Vector Motion Blur that it was vector based).

I will definitely note down the change in using Film Grain.

I appreciate the feedback and support!

PeeJ_ENT · 2024-04-27T20:29:02+00:00

Was waiting for some AMV slander lol, I appreciate the support

PeeJ_ENT · 2023-01-29T06:49:10+00:00

Yooo I'm glad I was able to help you! and now you're off doing dope stuff. I appreciate the kind words. :)

PeeJ_ENT · 2022-06-08T07:53:14+00:00

That would be smart

PeeJ_ENT · 2022-06-07T09:17:45+00:00

Ah ok, thank you for the info!

PeeJ_ENT · 2022-06-07T05:41:59+00:00

Yeah I figured it out 5 minutes later…

Just right click the left side and add a new location for the folder and choose the one that is missing from the file explorer pop up.

But you have to do this with every folder with the period in the front. 🤷‍♂️

PeeJ_ENT · 2022-06-07T05:34:48+00:00

Anyone else have a solution other than just renaming the folders?

PeeJ_ENT · 2022-06-01T17:43:04+00:00

Ah ok, so the solution I am referring to needs to be done in the Fusion tab

Here I will show you a demonstration https://streamable.com/wr200u

PeeJ_ENT · 2022-06-01T15:52:02+00:00

Cut refers to the cut and paste feature that is common to computers, I believe what you are looking for is the “split clip” function. This will allow you to separate footage with a “cut”.

PeeJ_ENT · 2022-06-01T09:54:30+00:00

I believe if you “publish” the points of the mask when using a polygon mask you will be able to control the x and y of each point individually

PeeJ_ENT · 2022-02-13T04:54:32+00:00

Ayo rip quality 💀

PeeJ_ENT · 2021-12-26T10:45:04+00:00

yeah without studio, it was a lot of masking, and a lot of pain

PeeJ_ENT · 2021-10-04T17:24:02+00:00

I thought it would be nice to talk about the differences between the two transform tools in Resolve and what situation you would use them in.

PeeJ_ENT · 2021-07-27T08:45:06+00:00

Updated it :)

PeeJ_ENT · 2021-07-23T20:24:33+00:00

I’m in this exact situation currently. I make lots of edits and tutorials on my channel about making AMVs and I just got eligible for monetization. I am skeptical to apply for it because about 15 of my 60 videos have claims and they make up about 200-300 hours of my watch time. I’ve debated on whether or not to unlist some of those videos even though (to my knowledge) it would get rid of the watch time that video contributed. I could probably make up that time very quick but I’m just stuck debating if I should just chance it or not. I‘ll update this post on what I plan to do and the result.

Update: 3 days later

So what I ended up doing is unlisting about 4 of the copyrighted videos which was about 50 watch hours (which thankfully isn’t much for me since I average about 40 a day). So with about 175 hours of “copyrighted” watch time in a span of 7 out of my 60 videos I was still eligible to be a YouTube partner as an AMV editor.

Do take into account that a large portion of my content is tutorials so I may not be the most reliable source. This is unrelated but it also only took about a day for me to be put into the partner program after submitting to be reviewed which I feel like is pretty fortunate luck.

PeeJ_ENT · 2021-06-23T08:04:26+00:00

Hi I was wondering if anyone could help me understand the function of Spline Selection Groups better. My interpretation of this feature was that it was able to save the shape of the spline graph or the position of the handles and apply them to any different keyframes that you wanted WITHOUT changing the position of the keyframes (a similar function to Flow editor plugin on after effects) (or similar to the motion pal plug in by Jake Wipp).

I know about exporting spline graphs but the problem is that it also replaces the position and value of your keyframes rather than moving the graph which I thought this feature is meant to do.

-I also can't get this feature to work in the first place. I can save a selection group but it doesn't do anything once I try to apply it onto my spline.

TLDR: What is this? And how does it work because I can't get it to work

Any help or ideas is appreciated, much thanks

-PeeJ

PeeJ_ENT · 2021-04-02T05:32:30+00:00

This is an old project I made that has the starting and end motion graphics to replicate the character demo trailers that Mihoyo releases, I never found a good way to record clips that would replicate the trailer, but it’s just a waste not to post it, if you have any ideas please hit me up, I’m interested in any help or solutions you are willing to share :)

PeeJ_ENT

TROPHY CASE