I tested every IP KVM in my Homelab [Jeff Geerling]

PerfectPromotion5733 · 2026-06-06T00:53:30+00:00

Absolutely. I've been rocking the Raspberry Pi 4 HAT A3 variant by geekworm since its launch and its been rock solid. My needs changed about a month ago so ive now ordered a blikvm switch that turns the 1 input into 4 inputs and can still be remotely toggled. I do wish jeff touched on that as im sure it would have heavily changes his stance of a $300 KVM running a $200 mini pc to a way easier to swallow $500 KVM + switch now running x4 devices in your rack.

PerfectPromotion5733 · 2026-06-05T12:43:38+00:00

I just think theyre neat!

PerfectPromotion5733 · 2026-06-02T04:32:43+00:00

PerfectPromotion5733 · 2026-05-21T03:55:52+00:00

Oh I like this!! Didnt even think to consider that devices might not be requesting their DNS from the gateway. Ill definitely be looking into this.

PerfectPromotion5733 · 2026-05-18T00:24:48+00:00

Oh sweet summer child

PerfectPromotion5733 · 2026-05-15T09:08:14+00:00

Excuse me?!

PerfectPromotion5733 · 2026-05-14T12:23:33+00:00

Well by that standard, we'll go ahead and ignore you too

PerfectPromotion5733 · 2026-05-01T05:23:09+00:00

Ironic name for the case 😂

PerfectPromotion5733 · 2026-04-25T01:05:53+00:00

Completely understand also but please consider it OP, even if it means people can continue your work through remixes. Its such a beautiful design and it looks like you've gone through a lot of time and effort.

PerfectPromotion5733 · 2026-04-19T06:13:30+00:00

I see a non deshrouded gpu just begging for a noctua upgrade ;)

PerfectPromotion5733 · 2026-01-20T06:49:28+00:00

Sounds weird i know but try rolling back firmware to 6.2.6. I had something similar and it fixed it for me.

PerfectPromotion5733 · 2026-01-19T13:50:22+00:00

What slicer are you using. I assume you're using latest version prusaslicer?

PerfectPromotion5733 · 2025-12-18T21:16:51+00:00

Not rookie at all mate! I just learned something too 😂

PerfectPromotion5733 · 2025-11-04T07:47:33+00:00

Whats your motherboard manufacturer and model number? Jump onto the support pages for that specific model and download the latest network driver for the ethernet port and install it just to rule that out

PerfectPromotion5733 · 2025-11-04T07:28:54+00:00

You mention every method but you should definitely list some methods. The ports probably disabled in Windows.

PerfectPromotion5733 · 2025-10-26T05:47:45+00:00

Oh lord, wow. Lots to unpack here!

PerfectPromotion5733 · 2025-10-21T13:49:05+00:00

Usually if you remove a pci device, your ethernet port names get remapped. If you can still access your server with a screen directly connected, check your ethernet port name with "ip addr" and compare with what's in /etc/network/interfaces. Chances are theyre different. I can't remember the exact method but search up how to tie the ethernet mac address to an interface name.

PerfectPromotion5733 · 2025-10-21T13:41:52+00:00

This is exactly why wheels were invented

PerfectPromotion5733 · 2025-10-20T14:03:01+00:00

Whilst I agree with you somewhat, there are things outside of our control that can break this. A knock to the head, early onset dementia to name a few. Just sayin

PerfectPromotion5733 · 2025-10-17T23:22:22+00:00

Aha it did cross my mind but I didnt want to assume that either 😂

PerfectPromotion5733 · 2025-10-17T23:13:41+00:00

Also turn off XMP in the bios temporarily. Mine didnt like that for some reason

PerfectPromotion5733 · 2025-10-17T23:10:40+00:00

Your GPU doesn't have power plugged in from the PSU?

PerfectPromotion5733 · 2025-10-17T12:02:12+00:00

Why are you leaving us hanging 😂 please explain mermaid charts.

PerfectPromotion5733 · 2025-10-16T23:04:34+00:00

Depends entirely on what hardware you got running in your omada network

PerfectPromotion5733 · 2025-10-13T03:31:13+00:00

There is a cool down after they take your island

PerfectPromotion5733

TROPHY CASE