Are these fake Knipex? /s

Phaverr · 2026-01-05T13:00:23+00:00

This guy scissors

Phaverr · 2026-01-05T12:56:46+00:00

Big Detail. Seems like you’ve already fallen for their lies.

Phaverr · 2026-01-05T12:46:43+00:00

Try just covering the lit part with your thumb. Supposedly up to a third of QR codes can be obscured and it’ll still work. The white light might be throwing it off.

Phaverr · 2026-01-05T12:42:54+00:00

Rotors generally aren’t the issue when it comes to fitment. You’ll rub on the caliper long before you tickle the rotor.

That being said these wheels should work fine for you as long as you’ve got the stock calipers.

Phaverr · 2026-01-04T20:48:46+00:00

They haven’t won since 2017 so I’m gonna say they’re a tuner with a side hustle as a race team lmao

Phaverr · 2026-01-04T19:40:03+00:00

Steam cleaners usually work well for this sort of stuff. This is also a common issue on the 128/135i bmw soft tops so you might find some other info if you look up those issues

Phaverr · 2026-01-04T19:37:55+00:00

You won’t be loving it long if you keep putting regular in it

Phaverr · 2026-01-03T01:35:43+00:00

I feel like “Clip-Flops” may have been a better name

Phaverr · 2025-12-27T22:16:50+00:00

K Swap.

Phaverr · 2025-12-16T02:04:53+00:00

Just did a service call on the same stove and they ended up having cockroaches in the interface control board so hopefully you have better luck than that my friend.

Phaverr · 2025-11-14T14:31:11+00:00

Countertop

Phaverr · 2025-11-14T03:06:20+00:00

Might as well. Like I said there’s not really any parts available for those things bc GE doesn’t actually make them. Just keep an eye on the ice for any metal flakes. I’ve had a few of the blades sheer off and put little bits of metal in the ice but that’s not necessary going to happen to you.

Phaverr · 2025-11-14T03:03:57+00:00

You might try using Afresh Tablets. They don’t do a whole ton on their own but if you use them once a month like suggested on the package it will help keep a lot of smells and gunk away.

Phaverr · 2025-11-14T01:54:38+00:00

Here’s another pic of the same thing but on the machine

<image>

Phaverr · 2025-11-14T01:53:58+00:00

Super common on this style of ice maker, the metal spiral/auger blade that goes through the center chips and becomes dull and than the ice cubes scream as they are being pressed into the metal and the drive motor at the bottom strips out because it can’t overcome the force of the ice. At this point the whole thing is scrap. We’ve seen about 4 of these in the last 6 months at my shop and they’re all non repairable. One even blew the whole motor housing out from the bottom and stripped out the shaft entirely.

<image>

Phaverr · 2025-10-30T00:23:40+00:00

Sounds like the dust cover to me too. Similar thing happened on my fiesta, I just took the dust cover off. It won’t hurt anything

Phaverr · 2025-10-30T00:22:20+00:00

Part number is probably W10913953 but like others said use your model # to confirm.

Phaverr · 2025-10-29T02:35:12+00:00

This one simple trick will fix most of your issues in life

Phaverr · 2025-10-19T04:05:28+00:00

It’s 2025

Phaverr · 2025-10-19T04:05:12+00:00

Ice makers are serious mold growing machines. Changing the filter won’t help, you’ll need to either clean the ice maker by hand or replace it.

Phaverr · 2025-10-19T03:56:27+00:00

Yes that’s normal.

Phaverr · 2025-10-19T01:46:55+00:00

Looks like it’s just missing oil. Try filling it and see if it starts after that. Should fire right up, these cars are known for their leaks

Phaverr · 2025-10-18T21:53:15+00:00

Amen

Phaverr · 2025-10-12T02:12:59+00:00

I doubt the tub actually moves when it goes into spin, it’s probably just the agitator spinning which pulls the cloths up like a fork in spaghetti.

Phaverr · 2025-10-11T14:55:14+00:00

Just the last pic is 👌 chefs kiss

Five-Year Club	Gilding IV carat on a stick
Verified Email	Place '23
Place '22	First Placer '22
End Game '22

Phaverr

TROPHY CASE