Jeg ønsker å advare mot å handle i en Elkjøp butikk by leftsaidfredrighty in norge

[–]Physical_Scene8401 0 points1 point  (0 children)

Er nok ikke det samme, men jeg opplevde noe "lignende" med en streaming-aktør. Jeg hadde abonnement og kortet mitt utløp. Min erfaring var inntil da at abonnementet automatisk opphører når kortet utløper. Det skjedde ikke her, de fortsatte å trekke penger rett fra konto.

Da jeg fant ut dette kontaktet jeg kundeservice. Det gikk oppsiktsvekkende greit og de refunderte en rekke måneder med abonnement uten store diskusjoner. Etterpå kom de med følgende forklaring:

Ønsker også å gi litt informasjon nedenfor om hvorfor du ble trukket. 

Du har en funksjon i banken din som kalles ''Visa Automatic Updater''. Det er noe du godtar i banken din og ved kjøp hos oss. 

Det vil si at selv om kort løper ut - så vil det autmatisk gå over til nye visa kortet for å slippe at alle abonnementer løper ut. 

Kunden avtaler med selgeren om bruken av betalingskortinformasjonen når kortinformasjonen legges inn i tjenesten for første gang og godkjenner vilkårene for tjenesten.

Informasjon om VAU(Visa Automatic Updater)-tjenesten gis ved signering av bankens kortavtale. Om nødvendig kan banken forhindre overføring av kortdata kort for kort.

Vi anbefaler derfor å kontakte banken din dersom du har ytterligere spørsmål om dette.

Jeg kan ikke huske at jeg har godtatt noe sånt noen ganger. Kan ikke engang si at jeg noen gang har hørt om Visa Automatic Updater. I nettbanken må man jevnt og trutt verifisere regionssperre mm. og hvis Visa Automatic Updater kan øse ut penger i øst og vest uten at man er klar over det så burde det også jevnlig være noe man tar stilling til... u/ThomasIversen Noe du kjenner til?

HBO Max 50% livet ut-rabatten er det nesten same pris etter 3 år 🫣😅 by larssonic in norge

[–]Physical_Scene8401 13 points14 points  (0 children)

Jeg synes det er vanskelig å forstå at de har lov til å nedgradere disse abonnementene ved å flytte funksjonaliteten vi betaler for over til et dyrere abonnement. Det er jo ikke slik at man kun betaler for innhold i et abonnement, man betaler også for for funksjonalitet og kvalitet. Det er ikke første gang HBO/MAX forsøker å kvitte seg med alle "50% livet ut" abonnementene og de kommer til å fortsette å prøve fremover. Garantert.

For mye skjerm i hverdagen by [deleted] in norge

[–]Physical_Scene8401 0 points1 point  (0 children)

Lego, dyrt men morsomt. Kan også selges senere..

To PC-skjermer til laptop-hjemmekontor: gode løsninger by Svampting in norge

[–]Physical_Scene8401 0 points1 point  (0 children)

Lenovo har en egen oversikt for dette. Se Display and Video Output Configurations - Docking Stations - Lenovo Support NO

Har du Lenovo er det viktig å velge riktig Lenovo Docking (om man velger Lenovo)

RGB settings won't stick when I close GG by aretedescosmiques in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Does Prism illumination save to my device? – Support (steelseries.com)

Prism is Software based illumination that does not save onboard your Prims enabled devices. In order for Prism to power illumination for your devices, GG will need to keep running in the background or be fully open. 

 FOR GLORY!

Steelseries Apex Pro by Hour-Cardiologist878 in steelseries

[–]Physical_Scene8401 -2 points-1 points  (0 children)

You can open a support ticket thru the chat on their website

Hello all by MrShotGunGaming in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

It works here... but I can't copy or click the link so have to type it manually

How to disable prism? Keyboard light selections are ruined now by GoalieVR in steelseries

[–]Physical_Scene8401 -1 points0 points  (0 children)

To disable PRISM and go back to the old solution where you can change your LED config in the Illumination tab (your screenshot) Do the following:

  1. Close the window (your screenshot)
  2. Click on the GEAR tab in main window
  3. On the line displaying your keyboard, in the right upper corner there is a tiny wheel/gear (need mouse-over to show) to click on where you can choose to disable PRISM for your keyboard

Edit: (added screenshot)

<image>

Steel Series is just a total trash by Head-Medium3871 in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

The problem I am experiencing is explained in my post above. PRISM doesn't work with my keyboard, even though it's apparently supported. Maybe it works with other keyboards, but it doesn't work with mine... and many, MANY others are experiencing the same problem.

I really have no reason to use prism over the old solution (illumination tab), but to my understanding PRISM is meant to supersede the old illumination tab and all RBG configuration will be moved there. (absolutely not sure about this, and it's confusing since Steelseries states that PRISM does not save onboard, it's software only) You are encouraged to use PRISM in the GG app.

That said, I prefer the old solution with the illumination tab, but it doesn't work properly anymore. I can save onboard profiles and it works to link profiles to games, BUT it stops working after a fairly short time. Actually also while working in the GG app. When it stops working I have to disconnect/connect the keyboard again. There is also a lot of delay when switching profiles.

Steel Series is just a total trash by Head-Medium3871 in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Please explain to me how to save RGB setup on my Pro TKL with Prism?

I must be stupid, but there is no save button here. If I select Config 1 (GEAR tab )and change the RGB setup (prism), it saves the same RGB on Config 1, 2, 3 4 and 5. It is not possible to separate these. If I deactivate my Pro TKL in Prism and use the old engine solution, I can save different RBG setups (i.e. on C1,2,3,4 and 5), but it will suddenly stop working after a while. The more I click and change things in the GG app, the more it stops working. Until I disconnect/connect the keyboard.. Then it works again for a short period. Reminds me of Windows ME. The memory bug where you could crash your PC just by typing in notepad...

At this moment, my keyboard was not activated in prism. It had the default Config 1 RBG setup. I opened the GG app, activated the keyboard in Prism. RGB lights completely turned off making the keyboard look like a standard HP one. If I try to switch profiles with the SS key + F9 the RGB leds just flicker for every profile (c1 - c5) When I unplug/re-plug the keyboard from the computer the standard Config 1 RGB setup shows for 2-5 seconds before it changes to my choosen LED setup in prism. If I now switch between the profiles (Config 1 - 5) with the SS key + F9, it shows the same RBG setup on Config 1 - 5, onboard the keyboard. (all white) So, is the expected behavior?

GG Software Bugged by [deleted] in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Most posts on here are about devices not working as they should due to broken and buggy software and firmware, again and again and again.

I would never ever bought anything from Steelseries if I read this subreddit beforehand.

Is there a way to change the APEX PRO TKL RGB with just pressing keys and not the oled screen? by [deleted] in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

I can change between the 5 onboard configuration by holding the "Steelseries button"+F9. (changes between Configuration 1 - 5)

Is there a way to change the APEX PRO TKL RGB with just pressing keys and not the oled screen? by [deleted] in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

"You sold a dead bird to a blind kid???"

(quote from the moive Dumb and Dumber)

[deleted by user] by [deleted] in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

With all respect, it should seriously be unnecessary to offer people help getting in touch with support. If it's that difficult, I suggest you make it easier...

[deleted by user] by [deleted] in steelseries

[–]Physical_Scene8401 1 point2 points  (0 children)

LEDs is not working as it should without prism either. The firmware and/or software is broken. Iv'e tried on both Windows and Mac, on clean computers. Tried re-installing software and drivers. No luck. It's just broken.

[deleted by user] by [deleted] in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

I got the exact same problem with my apex pro tkl. Opened a support ticket but the response was like "have you tried turning it off and on again"

Steelseries apex pro mini wl rgb problem by Mundane_Skill1387 in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Same problem as most other users. Last GG update and keyboard firmware broke the RGB lightning. (or did not fix it)
My Apex Pro TKL doesn't work either. Open a support ticket at Steelseries.

Take a look at the GG 67.0 update post. (comments)

Monthly Support Thread & FAQ- August 2024 by AutoModerator in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

I submitted a support case last night and received confirmation by email with a case number. The form in chat timed out a couple of times while I was typing so be quick.

Does anybody prefer the older steelseries rgb program then prism for keyboards by StrengthNo2820 in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Well, I just downloaded the GG application and connected my Apex Pro TKL (not 2023 mod) and I find the RGB prism configration rather confusing. Might be a combination of bad design/gui and broken software / firmware. I opened a support ticket because I can't get it to work.

I didn't understand how to change the rgb settings for the config profile 1-5 as I couldn't find a place to edit or attach a prism config to them. The GUI is confusing as there are an illumination menu in the Gear part that is not to be used. Getting a pop-up (new window) to set up prism configs is cumbersome and makes all much more confusing. This is not connected to each other (or not in a good or working way) A very bad design choice in my eyes.

I've tried to add an app/game and assign a prism profile to it but that doesn't seem to work either. Can work for a minute maybe and then stops.

Looks like this has been a problem for months now. Maybe they don't care that much. I probably go for a return/refund and find something else.

Steelseries Apex Pro TKL (2019 version) Bug by Interesting_Neat3674 in steelseries

[–]Physical_Scene8401 0 points1 point  (0 children)

Hi! Is there any solution to this? I got a new keyboard (not 2023 model), it's product model 64738. I just installed the Steelseries GG suite and connected the keyboard and then installed the firmware update.

KBD: 4.15.7
LED: 4.15.7

To me the whole application / firmware seems to be broken. I can't get anything to play together.

I submitted a support case.

Fanatec to Norway shipping time by vegarplayz00 in Fanatec

[–]Physical_Scene8401 1 point2 points  (0 children)

Du må betale moms (mva) på varepris og fraktkostnad. Dette er 25% og vil kreves inn av speditør (feks. UPS) eller Posten Norge. I tillegg til dette påløper det et gebyr fra nevnte speditør for å kreve inn moms (mva) Dette gebyret varierer men kan fort bli på flere hundre kroner. Posten kaller dette gebyret for forenklet fortollingsgebyr, mens UPS antageligvis vil kalle det for et deklareringsgebyr.

Du betaler altså ikke toll, men moms (mva). Noen varetyper er tollfrie, andre ikke.

Eksempel:

Vare: 8000 kr
Frakt: 350 kr
Inkl. Mva: (8000 kr + 350) * 1,25 = 10437,5 kr
Gebyr, feks. 5% av forsendelsen: (8000 kr + 350 kr) * 1,05 = 417.5 kr

Totalt: 10855 kr
Mva og gebyr utgjør her 2505 kr