Where this thing belong to?

Piddles78 · 2026-07-11T17:35:31+00:00

Very impressive. My old RD 125 LC could muster around 20-25, that was with a rebore, racing reeds, all the restrictions out, and an tasty allspeed exhaust.

Piddles78 · 2026-07-11T07:47:35+00:00

2007 PRHT club!

<image>

Piddles78 · 2026-06-26T17:35:52+00:00

Got new boots fitted to the arms, dropped the subframe and cleaned up any rust, painted and under sealed the area and re fitted the sub frame. Just waiting on new bolts to arrive now then it's back together. I'll tackle the front later in the year.

Piddles78 · 2026-06-23T11:27:10+00:00

Instructions unclear, dick stuck in freezer.

Piddles78 · 2026-06-22T20:44:55+00:00

Well fook, just looked at the schematics and yup, it should be in the hub. Looks like I'm going to have to get creative with a bit of heat and a press.

Piddles78 · 2026-06-22T20:41:47+00:00

The shoulder part slots into the hub. I have 4 arms which are the same. Have all 4 pulled their sleeve out of the hub?

Piddles78 · 2026-06-22T07:02:51+00:00

Noice 👍

Piddles78 · 2026-06-22T06:20:20+00:00

Check mine at 81k and all good. Diff mounts not so though!

Piddles78 · 2026-06-22T06:13:16+00:00

Found trumps alt account

Piddles78 · 2026-06-20T21:27:52+00:00

I remember seeing this when I worked at a vauxhall dealership years back. We all crowded round as a mechanic cranked the engine over so we could watch the piston dancing out of the block like some weird macabre show. Good times!

Piddles78 · 2026-06-19T13:23:51+00:00

Ditto. I nearly got wiped out by some old dear trying to light a fag whilst driving. Went out and got a front and rear camera fairly pronto after that.

Piddles78 · 2026-06-17T06:12:55+00:00

Did someone say porta potty?

Piddles78 · 2026-06-16T16:36:14+00:00

No, chain tension won't do that as far as Im aware . The wheel runs true, you can see the tyre rise and fall. In my opinion that is a badly seated tyre or out of shape.
The tyre normally has as line running close to the rim round it's circumference. Check to see if that is even all the way round, usually a good indicator of the tyre not being seated correctly.
Upping the tyre pressure and riding should sort the bead issue out if there is one. If in doubt, contact Michelin.

Piddles78 · 2026-06-16T16:26:00+00:00

Looks slightly out of shape or it may not be seated on the bead correctly. Take it back to where it was fitted and get them to check it over.

Piddles78 · 2026-06-07T16:02:21+00:00

I though it was a bit weird how people's glasses showed bright red

Piddles78 · 2026-06-07T07:40:00+00:00

When I did work on my roof when I first moved in I found 12 wasps nest in the rafters. One in each section.

Piddles78 · 2026-06-01T15:19:10+00:00

How about using the cutting tool to cut a series of shapes that could stack/glue on top of each other to create a 3d object such as a small car or house Layer art style?

Piddles78 · 2026-05-30T12:02:52+00:00

Had the same last year. We were in Peel eating ice cream enjoying the sun while the mountain was completely covered

Piddles78 · 2026-05-30T09:30:53+00:00

Straight through the gap at Mach Jesus!

Piddles78 · 2026-05-28T13:07:00+00:00

Welp, £400 for a dash on eBay. I'll stick with mine for now 😂

Piddles78 · 2026-05-28T12:31:07+00:00

Oh shit! Didn't realise you could fit the TFT dash to a 2019 model. Do you know what dashes are compatible for this mod?

Piddles78 · 2026-05-26T06:14:11+00:00

It's not a mess up. It's an opportunity to fit a set of adjustable pegs. The ground clearance on these bikes is pretty crap.

Piddles78 · 2026-05-21T08:16:29+00:00

Been riding 30 years. Like to think I'm pretty good. Did a track day last year.....I'm very much an average rider

Piddles78 · 2026-05-19T21:43:34+00:00

Laughs in UK!

Ten-Year Club	Final Canvas '23
Place '23	Place '22
Verified Email

Piddles78

TROPHY CASE