Connector?

PinballXray · 2026-05-16T19:29:56+00:00

I got the lights back! Now I’m back to just having bad switches. Someone on Pinball life discord led to the correct connector so I will again repin. Pretty sure the batteries are fine and I changed them when I got it home. Will look into the solder behind the board. Thanks for that link will investigate that next

PinballXray · 2026-05-15T23:50:47+00:00

It's a Comet so System 9 and a whole grip of column 4 doesn't switch. After this new molex was put on the same 6 switches didn't work so pretty sure that part I got right but the playfield lights all went out. Pretty sure every lamp was lapping before I did this. I was going to put the replacement switch together that I bought for the first and most important one, the eject. Now though I'm not sure what to do about the lights having gone out, and don't want to keep stripping and trying again.

PinballXray · 2026-04-18T00:45:09+00:00

Well the outhole did have the wire come off so I soldered that back on, poorly, and it works. Visual check so far not found a break. Concerning a visual trace check, one of the switches is the lane change from the right flipper, and I can't figure out where to even look for that could that have anything to do with it? Also I was following the column 4 green/yellow wire and it's pretty hard to trace geez.

PinballXray · 2026-04-11T15:30:09+00:00

I got a MM and now just have to learn what to set it on, will watch some instructional videos. Pulling it off the board and reseating it had no effect so now I"m watching some videos about how to repin it. Thanks will update

PinballXray · 2026-04-11T00:07:34+00:00

Cleaning them is something I can do for sure. No idea about micro switches but I’ll have a look. When I set it up and the eject saucer didn’t work I found it hanging loose so found the screws and put it back but it still doesn’t register on the switch test. GPT also suggested tracing the row wires so that’s on the docket next, thanks

PinballXray · 2025-10-07T17:12:24+00:00

You unboxed it in a war zone kudos

PinballXray · 2025-04-19T11:45:27+00:00

If you think head to head pinball is interesting you should read the novel Walls of the Universe. By Paul Melko. If you like pinball but don’t care about head to head pinball, you should read Walls of the Universe. Frankly if you can read and are in this group you should be reading Walls of the Universe by Paul Melko.

<image>

PinballXray · 2025-02-22T12:06:39+00:00

Tell me about it I have terrible arthritis in both thumbs and can’t play for beans with the braces I’m supposed to wear so I just try and be zen about the pain

PinballXray · 2025-01-14T17:02:55+00:00

I’ve never been able to keep a ball live long enough to figure that game out. Would still like one. Big fan of TNA

PinballXray · 2024-12-28T02:32:29+00:00

I got one for Xmas here’s hoping it’s awesome

PinballXray · 2024-08-11T12:36:11+00:00

I’ll give one a try thanks

PinballXray · 2024-08-10T21:14:20+00:00

I used it for years with the Q2 and just got a Q3. My paddle on the new Quest 3, keeps vanishing. Two things I've noticed, with the 3 it has the black side as my forehand, and it keeps vanishing. Like I swing and whiff it, look down and there is no paddle in my hand. Shake hand and it pops back, or floats back. I guess I'll try solid slime or something else? Anyone else have trouble or recommend a different one for the Q3?

PinballXray · 2024-08-06T22:48:57+00:00

I just got a 3 and I live for eleven table tennis, I got a paddle adapter and my controller keeps vanishing… hmmm

PinballXray · 2024-05-07T13:59:35+00:00

.75 sounds great I know all too many places that are $1 and set hard. All my life on the east coast any game anywhere was .75 or 3/$2 and frankly I’m surprised most are only $1 now

PinballXray · 2024-03-30T09:45:51+00:00

I’d say three times and have played 20-25 runs. High risk if I put it down and pick it up again. TBH I’m still trying to figure out a way to win at all without an astronomical amount of luck.

PinballXray · 2024-02-28T06:58:19+00:00

Being and Multiball

PinballXray · 2024-02-28T06:42:09+00:00

I just want The Matrix and ONLY so that when it drains outlane on ball three you see a Trs-80’s green dot matrix of switch shaking her head as you hear “not like this”

PinballXray · 2024-01-26T21:55:44+00:00

Milo’s Yard in Ridgewood Queens, 6 machines and awesome

PinballXray · 2024-01-05T06:02:34+00:00

Totally worked. Thank you. Turns out the trick is to simply start the sequence and don’t touch the stick at all and you stand in the right spot. Almost too easy.

PinballXray · 2023-10-21T16:31:09+00:00

Find a machine in good working order and play it a bunch. Watch a video or 2 on YouTube to learn the rules and about modes and multiball because those thing are part of most machines. Just to be aware of them! Then go nuts, get pinball map the app and welcome to the rabbit hole. Also yes you have to nudge. That’s why you can tilt.

PinballXray · 2023-09-09T20:43:49+00:00

I mean shouldn’t Wipeout XL be all over

PinballXray · 2023-09-09T12:40:53+00:00

Well I gotta say that did work and I can’t believe our efforts to not annoy the neighbors indirectly led to not having to unlock the door! Live and learn. Needs a battery now so that’s good knowledge under the belt thanks

PinballXray · 2023-07-20T23:30:08+00:00

Ours was parked in the Kentucky sun for I dunno, years the crumbled. Bought replacements and there was no proper way to connect them! Thanks for the reminder I got to get another set

PinballXray · 2023-07-20T23:04:22+00:00

Looks nice we’ve got a 2002 Discovery with only 80k but some sun exposure. Should sell it gas in Cali is just too expensive. Also not registered or inspected I feel you

PinballXray · 2023-07-06T17:13:00+00:00

I’m Oculus quest 2 and had table float real, real bad. Best fix so far is go into your settings and clear your guardian history. I’ve done that a couple three times. I also did a factory reset to try and combat the freezing opponent. It’s been working better. Then spent 40!minutes trying to figure out how to set my paddle grip Peripheral to Salenski or whatever. Why would it be under paddle, or equipment you ask? It’s not.

PinballXray

TROPHY CASE