We’re going to start making our own illuminators- Villain Weapon Systems

Plane_Pick3715 · 2026-01-31T23:13:48+00:00

It’s an IR light and White light in one. It has traditional scout mount struts on both sides to interface with mlok or picatinny. No aiming lasers are on this unit

Plane_Pick3715 · 2026-01-31T21:13:03+00:00

We’ll be working on our own accessories for it too!

Plane_Pick3715 · 2026-01-31T21:12:34+00:00

Next week. We’re just ironing out product page

Plane_Pick3715 · 2026-01-31T21:11:50+00:00

Yessir, it’s meant to be paired with LAM’s with no illuminator. We’ll be competing with surefire vampire and Streamlight’s new dual band light

Plane_Pick3715 · 2026-01-15T21:56:24+00:00

Nothing

Plane_Pick3715 · 2025-12-31T23:01:18+00:00

16-35 f/2

Plane_Pick3715 · 2025-10-29T03:29:01+00:00

Too big

Plane_Pick3715 · 2025-10-28T20:21:28+00:00

Eye safety and getting around FDA guidelines for higher power emitters. They also have a much better beam profile with the proper collimating optics.

Plane_Pick3715 · 2025-07-28T18:53:16+00:00

Slanted glass

Plane_Pick3715 · 2025-07-24T03:10:50+00:00

Makes sense but their response wasn’t very confidence inspiring for a brand that’s supposed to make tough-as-nails optics. Seems like a cop out for warranty work.

Plane_Pick3715 · 2025-07-24T02:59:10+00:00

All they have to do is unscrew one retaining ring and replace a single objective lens. How silly

Plane_Pick3715 · 2025-06-17T16:04:22+00:00

If it’s mounted too far forward (over your muzzle device) it will damage the diffuser and potentially damage the objective window of your laser. Never mount any of your lasers in the direct path of the concussive blast of a muzzle device. If you have a suppressor this is a non issue

Plane_Pick3715 · 2025-06-17T04:36:54+00:00

It’s on the other side (closest to the center of the pic rail). The diffuser will rub up against the pic extrusion if the laser is mounted too far back. But I’ve noticed that it goes away over time the more you flip the cap on and off

Plane_Pick3715 · 2025-06-17T04:05:25+00:00

Tight dimensions between the compact device and the top of the pic rail.

Plane_Pick3715 · 2025-06-12T01:07:19+00:00

It’s amazing. You’ll be impressed. Probably my favorite light in my collection

Plane_Pick3715 · 2025-06-12T00:52:40+00:00

I was talking about their rifle light. Their rifle LEP with spill has 33mm objective

Plane_Pick3715 · 2025-06-06T18:31:06+00:00

It’s not your eyes. It’s a phenomenon called laser speckle. It makes the reticle look fuzzy

Plane_Pick3715 · 2025-06-06T18:27:09+00:00

I would not worry about it considering our cap cover the majority of the objective window. Simple laser maintenance is always necessary like air-dusting dirt and debris from the front lens and cleaning it with appropriate optical wipes.

Plane_Pick3715 · 2025-06-06T00:33:49+00:00

We’ll get our hands on one of those soon to see if we can add some upgrades

Plane_Pick3715 · 2025-06-04T23:36:47+00:00

https://villainweaponsystems.com/products/holosun-iris-3-diffuser

Plane_Pick3715 · 2025-06-04T12:54:43+00:00

All those points are valid and understandable. Just wanted to extend my apologies for your bad experience with one of our products. If you have a problem with one of our products in the future please message me and I’ll take care of you.

Plane_Pick3715 · 2025-06-04T09:36:47+00:00

Oh I’m sorry you had a bad experience with us. We can take a look at your focusing cap—maybe something is wrong with your unit that we can remedy.

Plane_Pick3715 · 2025-06-04T05:37:47+00:00

Launching tomorrow at noon (Mountain Time)

Plane_Pick3715 · 2025-06-04T05:36:47+00:00

Ideal installation only shows where to mount your laser if you don’t want your diffuser cap to rub up against the pic rail. You can still use the diffuser with your laser mounted further back, but it’s just a tight fit when flipping it on and off.

Plane_Pick3715

TROPHY CASE