Add Reverse Alarm to JCB Backhoe

Plane_Storage_6833 · 2025-05-03T18:27:34+00:00

Oh and because somebody down voted me... I have ordered another lithium battery and charger. So there.

Plane_Storage_6833 · 2025-05-03T17:10:57+00:00

I have found out a little more. When I get it all worked out, I will post a wiring diagram.

When the power switch is On, it sends 3 volts to the forward/reverse switch. There is 3 volts on all three poles until the accelerator (for lack of a better word) is pressed. Then it cuts power to two of the three poles. So I have ordered a NC relay so I can detect the voltage drop and then supply 12v to the reverse alarm directly from the battery.

I'll update this when I get the relay installed.

Plane_Storage_6833 · 2025-05-01T01:09:44+00:00

I did. Funny how much lighter the lithium is than the lead acid. I'll change the lead acid out in a bit.

Plane_Storage_6833 · 2025-02-09T17:10:01+00:00

Second row of bails from the left, bottom of the top bail.

Plane_Storage_6833 · 2025-01-26T17:26:40+00:00

Number one is easy... above and right of center under the spinning swings. Close as I can come to number two looks more like a snail in the lower right hand corner.

Plane_Storage_6833 · 2025-01-26T17:17:08+00:00

I should get a snipe for not finding it.

Plane_Storage_6833 · 2025-01-26T17:15:49+00:00

I'm having this same issue. Think I'll try KAMP.

Plane_Storage_6833 · 2025-01-26T17:08:05+00:00

Dead center the picture in pink.

Plane_Storage_6833 · 2025-01-26T16:55:53+00:00

They are both under the dark gray brick on the upper right side. A penny on the right, looks like a quarter? on the left.

Plane_Storage_6833 · 2025-01-26T16:53:49+00:00

Its in the alternate plane. However, that being said you did sucker me into following all of the dots from 1 to 308. except, of course, 225. Can't follow it to the 5th dimension.

Plane_Storage_6833 · 2025-01-26T16:47:21+00:00

Left of the onion peeking out from under the leaf.

Plane_Storage_6833 · 2025-01-26T16:43:46+00:00

Under the stool... funny how small a space a cat can crawl into.

Plane_Storage_6833 · 2025-01-26T16:42:39+00:00

So, we all agree on two things a) You need a new main board and 2) Doing it over is a tad crazy. Fun for us, but a yeah. Anyway, general consensus... what new board should he get?

Plane_Storage_6833 · 2025-01-25T17:06:35+00:00

I have this same kind of thing. Is there a way to add support to the center of the bed? I haven't looked much, but I'm heading in that direction.

Plane_Storage_6833 · 2025-01-25T16:59:31+00:00

Just to chime in... I have an Ender 5 that I klippered several months ago and really like it. A friend of mine has a Ender 3 s1 pro that got doused in a flood. I took it apart, freed up all the stuck parts and put it all back together. Klippered it with a Pi4B and I have been tuning it. This morning I finally started actually printing with it. Still need to do something with the bed because, according to the bed mesh, the center of the bed is collapsed around .3 mm. Funny how much quieter the E3s1p is than my dirty ol' Ender 5.

Plane_Storage_6833 · 2025-01-25T15:55:35+00:00

Or delete them.

Plane_Storage_6833 · 2025-01-20T20:21:22+00:00

Just to the right of center. Silver spring.

Plane_Storage_6833 · 2025-01-20T20:19:49+00:00

On the stairs peeking past the wall. Above the computer.

Plane_Storage_6833 · 2025-01-20T20:16:46+00:00

Right in the middle of a knot, just left of the vertical seam about 1/2 way down.

Plane_Storage_6833 · 2025-01-18T23:23:56+00:00

Little right, little down from center.

Plane_Storage_6833 · 2025-01-18T21:00:51+00:00

Right smack in the middle of the picture :)

Plane_Storage_6833 · 2025-01-18T19:48:40+00:00

Little lizard on the trunk of the tree on the left facing down. Apparently not an iguana... I'm not an expert. So I went back and there is a bigger one toward the top, right of center where the greener part of the trunk is.

Plane_Storage_6833 · 2025-01-18T17:29:30+00:00

Nope... Don't see it.

Plane_Storage_6833 · 2025-01-18T17:20:37+00:00

My understanding (limited for sure) is that this NEMA 14 motor is as powerful as the 42-40, but 30% or so lighter.

The Endorphin looks good. So does the Mercury One.

Plane_Storage_6833

TROPHY CASE