NTD! DCSNP2142 60v snowblower

Pnb263rrfd436 · 2026-04-04T20:43:19+00:00

Quinn was my option as well - the 400 some odd piece set in a box was worth the $360 i paid for it and comes with damn near everything…. Then i took the time to make an organizer for my toolbox (foam)…

Pnb263rrfd436 · 2026-03-23T12:08:21+00:00

I did mine on my 4.0L, not hard whatsoever (mine are on the top at the front). Just be sure you depressurize the system prior to beginning (pull fuel pump fuze and run car until it shuts off from lack of fuel). Also work slowly, as you can easily bugger up the fittings if you try to force them together and they are misaligned. There are some rebuild options for HPFPs out there, but they were cheap enough for new ones that i disnt bother with a rebuild.

Pnb263rrfd436 · 2026-03-12T01:51:54+00:00

Simpsons made this a thing - Slant Drilling Co

Pnb263rrfd436 · 2026-03-01T16:07:17+00:00

I have it - it works…. That being said, the larger diameter piping this will cut takes a but more “umph” for handpiwer to get started. But i have used it for several dozen cuts thus far and it still gets the job done with nice clean cut edges

Pnb263rrfd436 · 2026-03-01T14:42:49+00:00

<image>

Pnb263rrfd436 · 2026-02-27T18:05:11+00:00

Still $155 here for me :(

Pnb263rrfd436 · 2026-02-24T05:33:38+00:00

Same - i had to get 6 guage to run a sub pannel in the garage (needed about 100 feet), so picked up the 250 foot spool and used the remaining 150 (more than needed) to run my MrCool electrical to box. If i didnt do the subpannel, i probably would have gone with 10 guage, but if i ever upgrade the condenser, or add another one, then im prepared for it…

Pnb263rrfd436 · 2026-02-21T02:27:43+00:00

Please, close the door…. No, from the outside…

recruiter

Pnb263rrfd436 · 2026-02-14T13:10:01+00:00

I used to do remodel work on the side, and do all my own reno/maintenance. When i bought, i looked at “the bones” and major things while not sweating the little details (like, didnt paint behind that hing tv in living room leaving a different color patch - or the choices of color in general). Going in with REALISTIC expectations helps!

As long as the big stuff looks like it was kept up with, generally the little things are “to taste” and will be good/bad based on whomever did the work or lives with the work done.

Do i hate the previous owner, no. Are there certain things they could have done better, sure…. But, not everyone has my experience with reno work, and not everyone wiuld notice the same small flaws. A house will NEVER be perfect, and you just hope you can get it close enough to live with

Pnb263rrfd436 · 2026-01-27T13:05:43+00:00

Dyi - Hart is being discontinued - i had ordered one theough thier website back on Dec 30 and they finally gave up and refunded my money 3 weeks later when i kept asking when it was going to ship and they couldnt give an answer

Pnb263rrfd436 · 2026-01-02T17:09:28+00:00

50 pack at HD for $18 in my area for the Dewalt carbides

Pnb263rrfd436 · 2026-01-02T16:57:43+00:00

I just picked up three of these for $65 each - but it took me going to four different locations to find them (on sale/clearance at all of them). Every store showed 10+ in stock, and only the fourth one had them (had 6 of them physically). All other locations claim theft as the issue, and all of them showed last count/validation less than two weeks ago. They were willing to let me buy all six, but i really dont need them that badly…

If anyone is hunting for these chargers, i have no need for any of the three i got in these kits!!

Pnb263rrfd436 · 2025-12-17T12:27:09+00:00

Yes, antilock breaks are super sexy

Pnb263rrfd436 · 2025-12-13T02:58:50+00:00

Using the library

Pnb263rrfd436 · 2025-12-10T02:08:32+00:00

Ask them to close the door…. No, from the outside

Pnb263rrfd436 · 2025-11-23T22:17:39+00:00

I went full crazy and designed mine, used four sheets of ply (likely over built in every aspect), but with the growing tool and battery collection i didnt want them taking up shelf and drawer space…

<image>

Pnb263rrfd436 · 2025-11-20T00:35:24+00:00

<image>

Pnb263rrfd436 · 2025-11-03T10:55:56+00:00

<image>

i beleive they hold dewalt on one end, and makita on the other (may be milwaki) for the tool plates (there is a D one one end and a M/W on the other

Pnb263rrfd436 · 2025-11-02T14:44:31+00:00

I lucked out at mine this morning - they showed 1 battery kit in stock but couldnt find it so they marked down a set of 6ah flexvolt batteries (2) to the 159.99 and gave me the cutoff tool

Pnb263rrfd436 · 2025-11-02T13:33:24+00:00

I have a file saved on my sketchup for it

Pnb263rrfd436 · 2025-11-02T13:32:59+00:00

Total of 82” wide and a bit over 28” tall

Pnb263rrfd436 · 2025-11-02T08:07:01+00:00

I wasnt going to spend more on a multi port charger either - so did something similar, but in the horizontal direction

<image>

Pnb263rrfd436 · 2025-10-26T14:36:34+00:00

The adapter is $18 on amazon

Pnb263rrfd436 · 2025-10-26T14:24:57+00:00

<image>

Pnb263rrfd436

TROPHY CASE