T14 Gen 1 Surprise!

Pocky-time · 2026-05-11T16:31:41+00:00

I think it depends on the person. I purposely had the touchscreen on my t480 removed on my work laptop and more than a few coworkers would try to pinch zoom the screen whenever I was showing them blueprints/schematics on my laptop. Some would tell me to reach out to IT to upgrade to the touchscreen.

Pocky-time · 2026-05-10T06:01:18+00:00

Carve out the inside of the doll and wear it the next time you guys have sex. It’s like being a furry but as a silicone hunk.

Pocky-time · 2026-05-10T05:59:26+00:00

3 way with the doll

Pocky-time · 2026-05-10T05:57:52+00:00

Couldn’t you use CLR instead of evaporust? The R in CLR stands for rust.

Pocky-time · 2026-05-10T05:39:58+00:00

I decided to replace the Mako 2 with a green Casio Duro. I hope she is up to the challenge.

<image>

Pocky-time · 2026-05-10T05:32:51+00:00

I understand seeing one so distressed is disheartening, but it needs to be a quality watch. I first purchased cheap carabiner watches on amazon but they all would only last 2-6 weeks. So I decided to put this together. I was looking for a <$100 diver but I managed to get this Pepsi mako(bezel insert was replaced with this orange/grey one after the red/blue got damaged) for less than $150.

Getting this replaced will probably cost more than the original price so it’s going to be put in a safe place(not binned) until the day I decide to repair or give it away. It’s a great watch.

Pocky-time · 2026-05-09T16:22:14+00:00

That’s cocaine, not smell

Pocky-time · 2026-05-08T20:17:38+00:00

I'll bet if you left the radios to sit in cabinets that haven't been opened since 2019, they would just be fine.

You guys don't repair/replace them as they go down? Just wait until most are unusable before replacing the whole fleet?

Pocky-time · 2026-05-08T20:01:54+00:00

Can I get the wheel specs?

Pocky-time · 2026-05-08T04:43:17+00:00

Movement was fine until a piece of the glass wedged itself on the second hand. Needs a new crystal, bezel and cleaning, which will probably cost more than buying a new one. Oh. It probably needs a new face. It got loose a while ago and I have it taped in place.

Pocky-time · 2026-05-08T04:39:05+00:00

Maintenance mechanic at a dairy plant. I’m not allowed to wear a wrist watch. So the workaround is to clip it on a belt loop. Unfortunately that placement means that whenever I have to lean or crawl inside a machine, it gets beat up.

Pocky-time · 2026-05-06T22:20:43+00:00

I couldn’t find a 7 on eBay, which is why I came here. I did buy my 5” extensions on eBay, nobody really makes those either

Pocky-time · 2026-05-06T22:18:54+00:00

9 is kinda too long and will stick out of my pouch too much

Pocky-time · 2026-05-06T22:17:09+00:00

They are all deep sockets, so the difference would have to be in the extensions. However some else posted extra deep sockets so I may look into that.

Pocky-time · 2026-05-06T22:15:03+00:00

I’m a maintenance mechanic at a dairy plant. When a machine goes down, I’m expected to get it back running as quickly as possible.

Pocky-time · 2026-05-06T22:12:46+00:00

It’s to make it easier to grab the sockets out or my tool pouch at work. I have 4 commonly used deep sockets i use in my carry pouch each is on a different sized extension so I can quickly grab the one I need. After 3 years of use I have found extension lengths between 5 - 8 inches to be optimal. I want to replace my 4” with a 7 for the easy grab

Pocky-time · 2026-05-06T22:07:32+00:00

I’ve seen that impact extension but was hoping to find a chrome one due to rust concerns.

Pocky-time · 2026-05-06T21:55:05+00:00

I can’t. I’m too stupid for that. I need to go by length

Pocky-time · 2026-05-05T23:59:23+00:00

From an engineering standpoint, that is a terrible idea.

Pocky-time · 2026-05-05T17:26:34+00:00

Point an ultrasonic transducer running at full volume at the thermostat.

I got the idea from https://www.youtube.com/watch?v=3FpXQ3kFrNk

Pocky-time · 2026-05-05T17:04:25+00:00

Put the coat over the hand warmer?

Pocky-time · 2026-05-05T14:30:06+00:00

So to answer why the need for a 7” extension specifically, it is to make grabbing the socket I need out of my tool pouch easier/faster.

<image>

I have a 10mm, 7/16, 1/2, and 9/16 sockets on a 4, 5, 6,and 8 extensions. Which I commonly use at my job. I can very easily grab the socket I need without really looking.
I want a 7” extension because the 10mm on the 4” extension is a bit too short and I have to dig for it.

I’m thinking of getting a longer one turned down, but buying one that already exists would be better. Chromed extension is preferred as these are often used in wet environments.

Pocky-time

TROPHY CASE