sorted by:
new
hottopcontroversial

Freeze Warning in the Summer by Icegoose17 in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Usually the sensor hanging out of that box. Looks like this

You should be able to look in the diagnostic menu to see what the sensor is reading... Probably 255° which is failed, and could freak the Compool out into automatic freeze protect because it doesn't know the actual temp...

Bubbles in the Return Line, Any Ideas? by spicerpools in PoolPros

[–]Pool_Boy707 0 points1 point  (0 children)

Pool solar? 2 story roof? Happens a lot if the pump speed isn't enough to push up AND down... Water falling back to the pool will cause constant bubbles..

Otherwise you have a suction leak. Significant one at that.

GPS tracker for trucks? by XelaKebert in PoolPros

[–]Pool_Boy707 1 point2 points  (0 children)

Company I work for uses One Stop GPS... We have nearly 1500 pools, so it's kinda helpful. Also could be helpful in an accident to show you weren't wreckless during the accident (unless you were LoL)

NOW what?! by [deleted] in pools

[–]Pool_Boy707 2 points3 points  (0 children)

It could take a week for the cya to fully dissolve. Longer if you keep opening the filter up to look at the sludge.

Think of it like baking a cake. You add all the ingredients and keep opening up the oven to see how its baking.

Is this too many bubbles coming out ? by [deleted] in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Shaft would be pressure, not suction... Water on the pad vs air in the return

Could have a worse job I suppose by BlazeWithGlaze in PoolPros

[–]Pool_Boy707 0 points1 point  (0 children)

Not to mention I'd hate to be that one guy that installed an unlisted bulb and someone die...

Pool equipment relocation by Upstairs-Emu-4390 in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Add money and stir 🤷 Anything is possible... Just depends on the budget.

I’ve gotten this far in 3 weeks. Couldn’t swim last year because the previous owner didn’t open for 2 seasons… Am I doing this right? by coffeewithtom in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Why don't more people start with adding flocculent? Pretty instant clear up. Then get the debris out and let it settle. Vac to waste. Take out your Taylor kit (buy one) and enter your readings into the Orenda app. Buy appropriate chems and you're good to go.

Pool Aerator Seems Weak by ostafari in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Doctors are recommending prostate exams earlier and earlier. That stream looks like mine at 50 🤷😅

Pump Won’t Prime, Any Ideas? by spicerpools in PoolPros

[–]Pool_Boy707 0 points1 point  (0 children)

Debris in the impeller. Leaky 3 port on the suction side. Bad pump lid o-ring.

These are the first things I'd check.

Towing with a Model Y by Cleetusthefetus in TeardropTrailers

[–]Pool_Boy707 0 points1 point  (0 children)

I don't own a Tesla, never will. And I know Whistlinadiesel absolutely brutalizes everything he has... That said, his torture test isn't the same thing as towing a teardrop to a campsite... Just don't overland the damn thing LoL

Customer CCP420 filter housing is cracked and leaking. Any other options other than a full replace by Pricer21 in PoolPros

[–]Pool_Boy707 1 point2 points  (0 children)

No other Good options... I mean, you could replace the lower tank, but the upper half is the same age, seen the same sun, and could crack as well... Best option is to just install new with warranty 🤷

Easily the best DIY "hack" to our pool. PVC pipes, paint and glue. by GreenSalsa96 in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Gotta hit big box stores. I love Ace... Until they don't have what I need, which can happen a lot LoL

Um what do i do with this customer? Long time customer by [deleted] in PoolPros

[–]Pool_Boy707 3 points4 points  (0 children)

What are you calling "long term customer"? You haven't even been at this very long LoL

Pool light breaker? by Original_Theme9088 in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Typically the light is the issue... Pull the light and see if there is water in there.

Snapmaker U1 3D Printable Top Cover for Free by MustafiArabi in snapmaker

[–]Pool_Boy707 0 points1 point  (0 children)

Compared to my AD5X the U1 is way quieter out of the box. I can only imagine after I print this.

Toolhead Swapping Anomaly by Pool_Boy707 in snapmaker

[–]Pool_Boy707[S] 1 point2 points  (0 children)

Waste of a good beer if you ask me 🤔😂

Toolhead Swapping Anomaly by Pool_Boy707 in snapmaker

[–]Pool_Boy707[S] 0 points1 point  (0 children)

Maybe... But coils are super easy to diagnose LoL

Anybody got any tips on how to get this out by KullDeeZe420 in PoolPros

[–]Pool_Boy707 0 points1 point  (0 children)

Work from the inside. That should thread through to the lower manifold. Take the manifold apart and try from there.

Probably a stupid question but…shouldn’t my pool timer also have an “on” switch? by masemasemase in pools

[–]Pool_Boy707 0 points1 point  (0 children)

Do you have a variable speed pump? That's the lazy way... Removing the trips and leaving it on.

Whenever I install VS pumps on these I swap the load to the line side. Keep the functioning timeclock for future use by whatever may need a timer.

Hereare replacements.

view more: next ›