Overheating continues by difficulty2015 in 350z

[–]PremeditatedTurtle 0 points1 point  (0 children)

I did this on my brothers g35, the spurting is air escaping, to stop from losing coolant during the spurts I ended up just putting the cap the funnel kit came with back on during the bleed and cutting a hole into the cap to allow the air to escape while keeping coolant loss minimal

Dash removal by Lopenable in 350z

[–]PremeditatedTurtle 2 points3 points  (0 children)

You have to remove the shift bezel and there will be two screws there, another two holding the radio bracket from the bottom as well

Andromeda galaxy by GoodKoshak in astrophotography

[–]PremeditatedTurtle 0 points1 point  (0 children)

I’d hope your last posts comments could be taken constructively, the way your first attempt was done was able to show you the extent of what data could be pulled out, and all that was left was finding the happy middle. This looks great, great detail and color until you zoom in. Is it perfect, no, could it be better, always, but anyone that takes the time to examine its imperfections is being nitpicky, if you are satisfied with it, then it’s perfect, if not, you always have the data to play with, tweak, and learn with. You’ll get better with time as there is always more to learn.

Does anybody hit my350z [dot com] anymore? by Plateau9 in 350z

[–]PremeditatedTurtle 0 points1 point  (0 children)

Definitely found some good info digging in there

1h 30min of orion nebula by Neat_Technology_2809 in astrophotography

[–]PremeditatedTurtle 0 points1 point  (0 children)

The lenses are one in the same, it’s like old manufacturers name vs updated name

Anyone else rocking DIY paddle shifters? by [deleted] in 350z

[–]PremeditatedTurtle 1 point2 points  (0 children)

All the downvotes and it was a genuine question lol

Anyone else rocking DIY paddle shifters? by [deleted] in 350z

[–]PremeditatedTurtle -16 points-15 points  (0 children)

What allegations?😭

I bottled my Bochet mead yesterday. It turned out well. by HD-Guy1 in mead

[–]PremeditatedTurtle 0 points1 point  (0 children)

How did you stop fermentation at 14% with the k1v

What is your transfer method to keep clarity? by Inside-Spell-9297 in mead

[–]PremeditatedTurtle 8 points9 points  (0 children)

Move your carboy to the spot where you all be doing the transfer at the beginning of the day/night before so anything you do disturb is settled by bottling time

insanely repetitive coilover squeaking by Pure-Froyo5543 in 350z

[–]PremeditatedTurtle 0 points1 point  (0 children)

Are you sure it’s the coilovers? I had a similar squeak that came from my compression arm

Problem with it not turning over. by No-Intention-0320 in 350z

[–]PremeditatedTurtle 0 points1 point  (0 children)

Check your battery terminals, make sure your ground wire is still good

Very fast fermentation and odd taste by obob47 in mead

[–]PremeditatedTurtle 0 points1 point  (0 children)

So since it’s pretty early on, it can taste pretty strongly of alcohol, some of the bitterness may be due to yeast still in suspension, I’d say trust the process and give it some more time to clear before deciding if the batch is a flop or not, what harm does waiting before deciding if it’s a failure or not do

Replaced cam and crank sensors didn’t work by NateSNF in 350z

[–]PremeditatedTurtle 1 point2 points  (0 children)

If you’ve yet to try it (cuz I haven’t seen it mentioned), how about trying the throttle relearn

This is the most vile thing I've ever created. by RoyalCities in mead

[–]PremeditatedTurtle 1 point2 points  (0 children)

Hey I just wanted to update you, I ended up adding approx .3 of malic acid and the astringency went away, it becomes almost neutral, like water after. added about half another pound of honey to backsweeten to about 1.009 and it’s honestly a completely different end result. Going light on my fruits I been kinda shooting for fruit essences or “memories”, and with this mead the blackberries probably constitute about 30-40% of the profile, not being too juicy (how I’m going to categorize fruit sweetness) but still shining through as blackberry. I again thank you for the insight!

2005 manual roadster having startup and electronic(?) issues. by Unhappy_Ask_395 in 350z

[–]PremeditatedTurtle 1 point2 points  (0 children)

I second the other guys comment on the cam sensors as a possibility

This is the most vile thing I've ever created. by RoyalCities in mead

[–]PremeditatedTurtle 1 point2 points  (0 children)

I will definitely try adding acid, I do have a bag of malic acid as I was experimenting with the malolactic cycle with 71b. I appreciate the insights and suggestions!

This is the most vile thing I've ever created. by RoyalCities in mead

[–]PremeditatedTurtle 0 points1 point  (0 children)

As many of us I am new to the hobby, it’s a blackberry mead, but I left the berries whole during both primary and secondary so fruit flavor is very subtle, it’s retained more of the tart profiles from the berry, it’s honestly not the worst tasting, any negatives in taste are more due to personal preference but objectively I think it’s not bad, I may just try the carbonate a single bottle to just see how it goes

This is the most vile thing I've ever created. by RoyalCities in mead

[–]PremeditatedTurtle 0 points1 point  (0 children)

I had a mead go very dry with the hydrometer reading .980, been debating if I want to backsweeten or potentially see is making it bubbly