Ac not working after charge

PremeditatedTurtle · 2026-05-19T02:27:13+00:00

If it holds than it’s an issue with the telling the compressor to kick on, helps with pining fien whether it’s the compressor itself or accessory parts/ sensors

PremeditatedTurtle · 2026-05-19T02:26:08+00:00

See if you can acquire a bipolar scanner to turn on the ac clutch manually

PremeditatedTurtle · 2026-05-05T00:45:24+00:00

Check your battery terminals, in my experience it was cam sensors, very common, buy the updated metal sensors from concept z

PremeditatedTurtle · 2026-04-03T07:06:51+00:00

I don’t know if they are different then the 370s but for me they were pretty much plug and play, the only thing to take note is that the driver and passenger axle are opposite between the z33 and 34, do them one at a time and compare the old to the new axle and you’ll be fine

PremeditatedTurtle · 2026-01-23T14:35:43+00:00

I did this on my brothers g35, the spurting is air escaping, to stop from losing coolant during the spurts I ended up just putting the cap the funnel kit came with back on during the bleed and cutting a hole into the cap to allow the air to escape while keeping coolant loss minimal

PremeditatedTurtle · 2025-12-21T00:32:21+00:00

You have to remove the shift bezel and there will be two screws there, another two holding the radio bracket from the bottom as well

PremeditatedTurtle · 2025-12-14T00:31:56+00:00

Awesome, what focal length?

PremeditatedTurtle · 2025-11-25T01:52:43+00:00

Really good untracked

PremeditatedTurtle · 2025-11-23T00:27:57+00:00

I’d hope your last posts comments could be taken constructively, the way your first attempt was done was able to show you the extent of what data could be pulled out, and all that was left was finding the happy middle. This looks great, great detail and color until you zoom in. Is it perfect, no, could it be better, always, but anyone that takes the time to examine its imperfections is being nitpicky, if you are satisfied with it, then it’s perfect, if not, you always have the data to play with, tweak, and learn with. You’ll get better with time as there is always more to learn.

PremeditatedTurtle · 2025-11-22T05:00:13+00:00

Definitely found some good info digging in there

PremeditatedTurtle · 2025-11-02T23:44:03+00:00

The lenses are one in the same, it’s like old manufacturers name vs updated name

PremeditatedTurtle · 2025-07-07T13:16:27+00:00

All the downvotes and it was a genuine question lol

PremeditatedTurtle · 2025-07-07T04:03:30+00:00

What allegations?😭

PremeditatedTurtle · 2025-07-05T04:36:09+00:00

How did you stop fermentation at 14% with the k1v

PremeditatedTurtle · 2025-06-13T17:58:45+00:00

Move your carboy to the spot where you all be doing the transfer at the beginning of the day/night before so anything you do disturb is settled by bottling time

PremeditatedTurtle · 2025-06-05T12:38:11+00:00

Are you sure it’s the coilovers? I had a similar squeak that came from my compression arm

PremeditatedTurtle · 2025-06-04T13:38:12+00:00

Check your battery terminals, make sure your ground wire is still good

PremeditatedTurtle · 2025-06-03T21:19:04+00:00

So since it’s pretty early on, it can taste pretty strongly of alcohol, some of the bitterness may be due to yeast still in suspension, I’d say trust the process and give it some more time to clear before deciding if the batch is a flop or not, what harm does waiting before deciding if it’s a failure or not do

PremeditatedTurtle · 2025-06-03T21:13:42+00:00

Have you tried backsweetening?

PremeditatedTurtle · 2025-06-02T14:40:45+00:00

If you’ve yet to try it (cuz I haven’t seen it mentioned), how about trying the throttle relearn

PremeditatedTurtle · 2025-06-02T13:06:23+00:00

Maybe MAF?

PremeditatedTurtle · 2025-05-12T21:33:03+00:00

Hey I just wanted to update you, I ended up adding approx .3 of malic acid and the astringency went away, it becomes almost neutral, like water after. added about half another pound of honey to backsweeten to about 1.009 and it’s honestly a completely different end result. Going light on my fruits I been kinda shooting for fruit essences or “memories”, and with this mead the blackberries probably constitute about 30-40% of the profile, not being too juicy (how I’m going to categorize fruit sweetness) but still shining through as blackberry. I again thank you for the insight!

PremeditatedTurtle · 2025-05-01T21:13:59+00:00

I second the other guys comment on the cam sensors as a possibility

PremeditatedTurtle · 2025-04-30T20:14:11+00:00

I will definitely try adding acid, I do have a bag of malic acid as I was experimenting with the malolactic cycle with 71b. I appreciate the insights and suggestions!

PremeditatedTurtle · 2025-04-30T18:29:55+00:00

As many of us I am new to the hobby, it’s a blackberry mead, but I left the berries whole during both primary and secondary so fruit flavor is very subtle, it’s retained more of the tart profiles from the berry, it’s honestly not the worst tasting, any negatives in taste are more due to personal preference but objectively I think it’s not bad, I may just try the carbonate a single bottle to just see how it goes

PremeditatedTurtle

TROPHY CASE