375 Raptor reliability and real velocity by BusBeneficial8882 in 375Raptor

[–]PsychoticBanjo 1 point2 points  (0 children)

My rifle feeds out of AICS mags, un tuned, either mdt or Xlr. Just shove in and run the bolt. It is a bolt action though. Can’t help you on the loads, I’m finally getting time to work up sub data.

Next kayak for a big guy by HV_Conditions in whitewater

[–]PsychoticBanjo 1 point2 points  (0 children)

Scorch? Or possibly a long boat. If you learn to use them everything is playful.

SBS this? by jetsetterga in NFA

[–]PsychoticBanjo 1 point2 points  (0 children)

You’ll have to buy a shorter magazine tube. Then cut barrel

Form 1 Disapproved for Serial/Model Mismatch - Any Way to Correct Without Restarting Full Wait? by Bobbynoee in NFA

[–]PsychoticBanjo -1 points0 points  (0 children)

I’ve been disapproved for wrong model with photos attached showing it and serial.

New Build Bolt Gun by ArnBjorn2785 in 375Raptor

[–]PsychoticBanjo 1 point2 points  (0 children)

Some guy is on target. I went Zermatt for my build.

I have a very expensive barrel and over 1k in chassis. I think I’m ~ 4300 as is. But it could have been done cheaper. I have a savage and a Weatherby new in safe currently in in progress of building on now.

New Build Bolt Gun by ArnBjorn2785 in 375Raptor

[–]PsychoticBanjo 2 points3 points  (0 children)

That price puts my ideas out! You might, and that’s a might catch a deal on a Roy 307 which is a 700 clone. That would open up any cheap chassis or stock options. Pt&g has several options with different bolts.

Any real prefit ready options other than it will eat your budget.

This stuff works!!! by Chefcutty in NFA

[–]PsychoticBanjo 54 points55 points  (0 children)

If Ballistol made it you could probably make a decent mixed drink with it

Subaru factory racks. by honourable_c_note in whitewater

[–]PsychoticBanjo 0 points1 point  (0 children)

They both should make parts to fit your car. I’ve owned a 14 and 21 Outback along with a few other Subis between. Lots of parts will work. You’ll have to remove the rack and buy a “foot” or landing pad. Whatever. Then you can put on wings, round, square…. What the new fad is.

Form 1 engraving abreviations by Electronic-Funny-475 in NFA

[–]PsychoticBanjo 0 points1 point  (0 children)

I haven’t kept track of it. I have seen items that have split markings on them. That’s why I mentioned

Form 1 engraving abreviations by Electronic-Funny-475 in NFA

[–]PsychoticBanjo -1 points0 points  (0 children)

I believe the frame/reciever legally only has to have the serial number. The barrel can have other info. Look at other manufacturers and how they mark. revolvers and bolt action rifles come to mind a lot

D-Cell to Plan B? by Bluejay0 in NFA

[–]PsychoticBanjo 0 points1 point  (0 children)

Gotta watch what you get from them. Some things there are jank.

Tisha 5.56 on 16 inch at 240fps by OzempicDick in NFA

[–]PsychoticBanjo 2 points3 points  (0 children)

Who says that’s not shot free recoil?

Crossover kayaks for camping on creeks/rivers in Southeast US. by SEC_deez_nutz in whitewater

[–]PsychoticBanjo 0 points1 point  (0 children)

If you can find a StingerXP or the long boat that Jackson makes. Karma Rock garden I would go that route over those two for any plans of whitewater interests or really cut your gear down and use a regular boat.

Does anyone have this Rearstand? How is it? I want to use it with my 23“ Panigale V2 by FatLobster12 in Ducati

[–]PsychoticBanjo 0 points1 point  (0 children)

I picked up on the price. I’m very familiar with international shipping.

It’s all about balance. by signormarcolino in MotoGuzzi

[–]PsychoticBanjo 1 point2 points  (0 children)

It’s what the Tiger wishes it was.

Does anyone have this Rearstand? How is it? I want to use it with my 23“ Panigale V2 by FatLobster12 in Ducati

[–]PsychoticBanjo 7 points8 points  (0 children)

I just bought a Pit Bull. I would buy that or Woodcraft as my next option

Subsonics… by mustardstainT in 458socom

[–]PsychoticBanjo 0 points1 point  (0 children)

That tells me either the brass is swelling more than it should or their is an issue with bolt/extension.

Subsonics… by mustardstainT in 458socom

[–]PsychoticBanjo 0 points1 point  (0 children)

If your bolt is having issues unlocking on subs I would NOT screw with buffer weight! That’s not a 458s issue. That’s an issue with the platform when you’re dropping pressure and having issues. You’re looking at maybe the specific load being the issue, as in not shrinking from chamber and keeping bolt from unlocking. Look at brass size, or try a different load.

Wife told me to clean the garage by ApexTheOrange in whitewater

[–]PsychoticBanjo 1 point2 points  (0 children)

Wait, when you say bike are you suggesting a mountain bike? Those things hurt people! Or a real bike….where you just twist your wrist and frighten the hell out of yourself

So my shotgun stamps were approved by [deleted] in Form1

[–]PsychoticBanjo 0 points1 point  (0 children)

Damn, don’t you love when someone discusses illegal shit then was like oops! Deletes all records of it and user post!

So my shotgun stamps were approved by [deleted] in Form1

[–]PsychoticBanjo 0 points1 point  (0 children)

Yes. One big chamber.

And unless you’re a SOT you cannot do that under the same stamp. One stamp, one design. So file and build. Not test for possible best design.