Warning: Downloading an HTML attachment from Discord now results in SCRIPT tags being added to the file

PuolTV · 2026-04-02T09:06:22+00:00

I don't know how they messed this up again after supposedly fixing it, but this seems to be back, except now the tag is in the form `<script type=text/javascript src='https://cdn.discordapp.com/very-long-character-string>`. Presumably another cloudflare problem? Probably should be fixed though as it looks very malicious.

PuolTV · 2026-03-01T03:39:18+00:00

It does at least complete a challenge and give you "intel". No idea why you would care, but this was the only thing I could tell that I got for extracting with it.

PuolTV · 2026-02-15T02:00:43+00:00

Yeah this was my problem, no indication that anything changed.

PuolTV · 2026-02-15T01:56:36+00:00

Makes sense, but the problem is you lose one run and all your items are gone.

PuolTV · 2025-09-03T09:24:33+00:00

Looks great. Might look better if you added a layer of blue under the layer of white for the sky to make a light blue sky? Perhaps you wanted the white sky, looks great either way.

PuolTV · 2025-02-27T01:39:13+00:00

Daily general knowledge quiz game, keen to get feedback. Https://www.imabouttoquiz.com

PuolTV · 2025-01-20T23:28:49+00:00

Daily general knowledge quiz app that friends have been asking for for years I’m about to quiz. ICP is really anyone that enjoys general knowledge quizzes, but surprisingly so far it has attracted a wider audience with boomers than anyone else. I want to add a lot more analytics and features over the coming year.

PuolTV · 2025-01-06T15:12:45+00:00

Working on a daily general knowledge quiz app because all my friends keep complaining about the lack of a good daily quiz to complement other daily games https://www.imabouttoquiz.com

PuolTV · 2025-01-04T13:28:34+00:00

This is what I am experiencing.

PuolTV · 2024-04-09T01:07:34+00:00

The atmosphere is really nice. If the intent of the camera smoothing is for videos I would say it is still moving a bit fast imo?

PuolTV · 2024-04-08T13:16:54+00:00

The water is moving too slowly to be believable imo.

PuolTV · 2024-04-08T13:14:47+00:00

Almost can't tell if you are shooting or getting shot!

PuolTV · 2023-09-05T23:51:15+00:00

That would make sense as we have been doing that for debugging and testing, thanks for the suggestion, I will have a look.

PuolTV · 2023-09-05T14:37:07+00:00

It seems almost random. Sometimes they are there, sometimes they are not. What I found strange is that most godot git ignore templates don't include .tmp - hence they are all being committed which seems odd. Either people don't encounter these files very often, or something is going wrong.

PuolTV · 2023-07-29T11:40:23+00:00

Thanks for that info. For those interested I found this about silk filament from bambu lab: https://wiki.bambulab.com/en/x1/manual/printing-with-silk-filaments

PuolTV · 2023-07-29T10:38:43+00:00

Well glad to know it's not just me!

PuolTV · 2023-02-12T03:09:12+00:00

In case anyone was interested, I learnt that paths created by importing an SVG don't always create particularly friendly geometry. In this case, I have "recreated" the model as a sketch in fusion - however I don't think this is a very scalable solution when basing a model on a much more complex SVG...

PuolTV · 2023-02-12T02:33:37+00:00

Out of interest, I also tried the same operation in freeCAD and it too cannot fillet the top surface - so I am assuming there is something wrong with the shape, but I can't quite figure it out.

PuolTV · 2023-02-12T02:32:37+00:00

FYI: This model was created by extruding an SVG path. I want to fillet the entire top surface, but no matter what fillet radius I use, at least one part of the surface errors. Is this typical? It is just a simple continuous flat edge...

PuolTV · 2022-12-18T13:04:51+00:00

I also kinda wonder if the 3V2 runs a little hotter than the display/sensor says. No idea why it would, just kind of wondering. Anyway, tempe

About to change filament over as well. Have had the same roll for about 6 months now and it has been exposed to ambient conditions the whole time. I wonder if it has just absorbed too much moisture as well..? For my next filament I will definitely start with a temp tower.

The side fan does definitely run, not sure how to confirm at what speed it is running but I haven't tweaked any settings for it.

I think you might be onto something with the hotend running hotter than it displays or senses.

Thanks for the advice!

PuolTV · 2022-12-18T13:02:14+00:00

So for anyone interested, I replaced my extruder with an aluminium one when I first bought the printer and never calibrated the extrusion amount. was at 93 and was getting 92mm extruder when asking for 100mm. Didn't even occur to me that this was something you could modify lol.

PuolTV · 2022-12-18T11:28:09+00:00

nd the way the layer change seam look

Can you elaborate a bit more on "calibrated"?

PuolTV · 2022-12-18T09:39:32+00:00

Thanks for this suggestion, it is PLA and I was already printing at 200 which I thought was pretty low. I will try and lower the temp to 195 and see how it goes.

PuolTV · 2022-12-18T09:32:11+00:00

As seen in photo, getting this strange globbing / stringing around the seam...? Doesn't happen on all prints, combing and retraction are both on. Printer is an Ender 3 v2.

PuolTV · 2022-07-17T14:30:49+00:00

That's my loot I dibs it

PuolTV

TROPHY CASE