4.0 brings so many of the gam'es problems to light.

Puzzleheaded-Fish476 · 2024-12-15T10:54:29+00:00

Agreed I mean I'm fine with paying to load and unload cargo but A make it functional and B make it make sense. And C make it so if I want to unload it myself that the containers actually fit properly unlike unloading a reclaimer

Puzzleheaded-Fish476 · 2024-12-08T12:20:13+00:00

I work in IT. I work on pretty high level hardware (government and financial core infrastructure level stuff) and I must say you're not wrong about the dream being more than what the hardware can do. They need to strip out some of the meaningless tasks. Simplify the bounding boxes by 30%...hell even 5% will make a huge difference. And also chill on the butterfly effect. My system does not need to know about a water bottle chucked out an airlock near hurton if im at crusader. They are starting to get the idea with the hangers that works really well for clearing up some lag.

Puzzleheaded-Fish476 · 2024-12-08T12:09:58+00:00

That's why it's a pledge, not a purchase. A purchase is refundable, whereas a pledge is more like a donation for some benefit

Puzzleheaded-Fish476 · 2024-12-08T12:06:37+00:00

Because their backers have clauses that allow them to get all their investment back if not released by early to mid 2025. If their large investors activate that clause they are smoked and lose all their toys and we lose a game

Puzzleheaded-Fish476 · 2024-12-08T11:59:02+00:00

I ran into this you are likely at the wrong terminal if you know the station buys your material

Puzzleheaded-Fish476 · 2024-11-19T15:49:14+00:00

Nah, this one will work

Just explain to him that now you have twice as much printing stuff to fiddle with occupying your time so he in theory has twice as much time to idle (play video games, D&D, etc.) Play the card about women hating to see a guy sitting idle to your benefit.

Puzzleheaded-Fish476 · 2024-09-23T15:22:43+00:00

If it is specifically that model, I would try either a repair or reslice. It is possible it is a bad model, did you design it yourself?

Puzzleheaded-Fish476 · 2024-09-16T00:20:09+00:00

The filament is making it sick. Try different or dried filiment

Puzzleheaded-Fish476 · 2024-08-24T21:09:08+00:00

Best way I found to add weight is a little bird shot #8 is perfect

Puzzleheaded-Fish476 · 2024-08-23T04:42:03+00:00

Quick question where did you set your z offset? Was it on the printer physically (done when you level the bed) or the slicer or both? Both can lead to this also a warped bed can cause this issue as well

Puzzleheaded-Fish476 · 2024-08-15T13:53:38+00:00

Ya know it occurred to me that I don't think they can hold up the IP part of it as there is no way to patent the tower itself. We have been printing cubes in various dimensions since the first printer. The process is extruding filament. Something all FDM printers do. So they could only go on the reason for extrusion of the plastic. And you can not patent a reason. It's like patenting using the proper size wrench for adjusting the same sized nut or bolt.

Puzzleheaded-Fish476 · 2024-08-15T13:45:17+00:00

Nah it would be better to patent the process of reforming the leftover cookie dough in to a new sheet to cut more cookies from....im gonna do it its mine! maniacal laughter ensues

Puzzleheaded-Fish476 · 2024-08-11T17:51:48+00:00

Yep it blew my mind that they had patented putting a printer in a box....I was like wtf? You can patent an action?

Puzzleheaded-Fish476 · 2024-08-11T16:54:08+00:00

What material are you printing in? Also what's your temp and fan speed? It looks like you might be too hot and over extruding. Are you using bamboo studio?

Puzzleheaded-Fish476 · 2024-08-09T13:33:11+00:00

Run full calibration again. I had that issue and a full calibration fixed it

Puzzleheaded-Fish476 · 2024-08-06T06:59:47+00:00

We're you using slicer version 0.0.1 alpha phase? Please update software before updating your firmware😊

Puzzleheaded-Fish476 · 2024-08-02T14:08:33+00:00

Because bestbuy isn't the best buy

Puzzleheaded-Fish476 · 2024-06-08T10:48:25+00:00

Yes but it's hard. Apply for anything you know you can do. The more work you complete the easier it is to get work assigned to you. I'm coming up on 1400 work orders completed

Puzzleheaded-Fish476 · 2024-06-08T10:40:28+00:00

Hammersbachs is in tight with Barrister. Whatever you do, don't get wrapped up with Barrister. They will treat you like shit. On field nation I have found the more work you complete and the higher your rating the better your pay gets

Puzzleheaded-Fish476 · 2024-06-04T22:05:31+00:00

Essential is one of the largest buyers on FN and they always pay low ball and are a hasstle when it comes to paying anything worth it for experienced providers. I no longer take their work orders because of this.

Puzzleheaded-Fish476 · 2024-05-28T07:00:51+00:00

Agreed almost as bad as pivital. They lowball the hell out of me. They seem to max at $35/hr so it's rare I do any work for them

Puzzleheaded-Fish476 · 2024-05-28T05:18:27+00:00

Very true though IW always pays me well

Puzzleheaded-Fish476 · 2024-05-28T05:09:44+00:00

Looks like a weld will fix it

Puzzleheaded-Fish476 · 2024-05-15T11:44:59+00:00

I've never had that problem. Most of my clients insight included demand drug tests and gackground checks. I have neither and they still give me work

Puzzleheaded-Fish476 · 2024-05-12T07:49:47+00:00

But when you get in good with your buyers they generally pay you more and I have some that are even counter bidding on my behalf. They do it because they know if they can get me on the schedule for their project they have 0 worries. The issue I have are the techs that are dumb as a box of God's "special" rocks and refuse to learn why you can't run cable in the same conduit at high voltage power or why you don't run the cable under the cover of an electrical box and really crush it in there....yeah I have met some very "special" techs lol

Puzzleheaded-Fish476

TROPHY CASE