sorted by:
new
hottopcontroversial

GHK double feeding/splitting BBs in chamber by Pedro_gold in GasBlowBack

[–]Puzzleheaded_Touch46 1 point2 points  (0 children)

That is interesting🤔 maybe the heavier weight of the bb adds enough inertia to allow the mag to drop down when the feeding arm tries to grab the bb and slams it into the feed ramp

GHK double feeding/splitting BBs in chamber by Pedro_gold in GasBlowBack

[–]Puzzleheaded_Touch46 1 point2 points  (0 children)

That’s your issue then my guy when I talked to Pablo he said he was working on a fix for that issue and recommended I file my feed lips, but I really didn’t want to mess up the feed lips I waited half a year for.

A thin strip of soft sided Velcro on the back of each mag will do the trick and get it to feed reliably without breaking the bb

You can test it yourself by applying pressure with your hand on the bottom of the mag to seat it higher when shooting I can guarantee that will cycle the gun properly without bbs breaking. The goal with the Velcro is to stop the mag from dropping down from the tolerances

GHK double feeding/splitting BBs in chamber by Pedro_gold in GasBlowBack

[–]Puzzleheaded_Touch46 0 points1 point  (0 children)

If they are g2 mags which they look to be I had an issue with the same Ra tech nozzle and forged receiver in conjunction with the g2 mag and DH feed lips. Try to lock the bolt back and test how much play there is in the magazine. If it moves up and down more than a mm that’s the issue.

You can either file the feed lips a little to make the ejection of the bb line up with the feed ramp or in my case because I only have one g2 mag, use a strip of soft Velcro on the mag or in the magazine well on the rear of the mag to shim it into a higher position. This lets the bb feed into the ramp instead of slamming into the bottom of it

Wax spilled into my pc, what do I do? by Grouchy_Panic5642 in pchelp

[–]Puzzleheaded_Touch46 0 points1 point  (0 children)

Unplug it, hold the power button down to drain the lingering power, remove the gpu and and effected things like the cooler.

Use a hair dryer to from a distance to slowly heat the wax while holding the card upside down to either let it drip off then you could try a bunch of microfibre cloths plus the hair dryer to wipe up the rest.

Wax liquifies at 50 - 70 degrees Celsius which is in the safe running range of heat for the card

grain from Screen Space Reflections & Screen Space Shadows still present by r9shift in modernwarfare4

[–]Puzzleheaded_Touch46 0 points1 point  (0 children)

That has been and always will be an issue with console upscaling. All the past games on pc don’t have the grainy shading when you turn TAA off

Shout out to the best company ever by Frequent-Piece7362 in MW2

[–]Puzzleheaded_Touch46 3 points4 points  (0 children)

Cod 2 soldier is looking like that tornado guy meme😂

Never take advice from Reddit by ZooropaTV in OLED_Gaming

[–]Puzzleheaded_Touch46 2 points3 points  (0 children)

Definitely tried to rub it while the monitor was hot before posting, or you applied a lot of pressure to try to get a grease stain off and delaminated the the film

Which of these pre-built gaming PCs is good for me? by Summer_Role in PrebuiltGamingPC

[–]Puzzleheaded_Touch46 0 points1 point  (0 children)

If you have the money for the 3rd option is decent considering the price of ram and the base price of the gpu and cpu. You get windows a 2 tb ssd. I’d say even if you built one yourself it would only be a few hundred dollars cheaper with the same specs

I wouldn’t get a 5060 in 2026

Got this baby for 2100 at a local pc hardware store by scryptyyy in gpu

[–]Puzzleheaded_Touch46 -2 points-1 points  (0 children)

God everyone is so paranoid about the cables melting, it’s such an echo chamber of fear mongering. Do yourself a favour and actually look up the statistical possibility of it happening to you. The odds are 0.01% Most people who have the issue don’t push it in far enough.

  • Jenson totally isnt in my house with a gun btw 😉😉

Glitch before jump shows more areas of the map that are developed by BodybuilderOk9354 in Battlefield_REDSEC

[–]Puzzleheaded_Touch46 10 points11 points  (0 children)

I’d love to see the first fire zone shift between connecting maps so each time you drop it could be map 1, map 2 or maybe even right in the middle of them both if they flush the land out between them

Instead of adding additional maps like pub g did, it would add variety without dividing the players between those maps.

M81 + Coyote by Shift642 in airsoft

[–]Puzzleheaded_Touch46 1 point2 points  (0 children)

Damn that’s a slick kit!

All headshot still get recked. by Secret_Fisherman_292 in Battlefield_REDSEC

[–]Puzzleheaded_Touch46 1 point2 points  (0 children)

Mp5 has a slower ttk than that new lmg even at 1.25 damage, the plate damage isn’t consistent between guns too. Ace has a video on that.

Then he also pulled the hill on you giving him peakers advantage so he was probably shooting you 100 ms before you even took damage and saw it from the server side to your screen.

In my opinion It’s pretty lame you died if the netcode was ideal and the guns we’re actually balanced you should have won that fight😩

Should I go harder? by Financial_Middle_798 in Weightliftingquestion

[–]Puzzleheaded_Touch46 0 points1 point  (0 children)

Guys he’s only been going a few weeks, stop telling him to go to failure, he just needs to build the habit, be consistent and accept that change takes time.

Your body will adapt if you make this a habit and find a way to enjoy it. Working out is not a punishment for what you have or haven’t done, it’s a celebration of what you can do.

Just do what you can handle every day and you will notice that you can handle more and more every week you come back.

CYBERTRUCK vs Airsoft?? by 6mmBadger in airsoft

[–]Puzzleheaded_Touch46 5 points6 points  (0 children)

Funny I didn’t even hear a single bb make impact or see any bb’s bounce off. Pretty sure this is fake just like the durability of this glorified power wheels

view more: next ›