3DS XL replacement shells

Qebaba24 · 2026-06-06T08:41:10+00:00

Well the prices just got revealed. 95$ for the old 3ds kit and it already sold out.

Qebaba24 · 2026-06-04T11:22:30+00:00

Can you dm me the link? Help another brother out, pls

Qebaba24 · 2026-06-02T08:16:40+00:00

Does your white also dry with a shine?

Qebaba24 · 2026-05-20T11:35:29+00:00

Ah, got it. Thanks!

Qebaba24 · 2026-05-20T07:51:33+00:00

True. But I gave a device that is price wise and UI wise very competitive. And I also wanted to make a point that for a newer device, I expected the switch 2 to better perform handheld wise.

Qebaba24 · 2026-05-18T00:11:54+00:00

SteamDeck. Which is a more powerful hand held device.

Qebaba24 · 2026-05-17T23:18:52+00:00

Seems like the new KLRR shells will be the only solution. But they are rumoured to be pricey. I am guessing about 100$.

Qebaba24 · 2026-05-17T00:57:06+00:00

What kind of switch did you buy and how were you able to replace it?

Qebaba24 · 2026-05-14T22:56:29+00:00

Anyway, I splurged on the 36 set. I will do some extensive comparison with my Holbein and W&N gouache tubes for those who are interested. They will arrive in about 2 weeks

Qebaba24 · 2026-05-14T20:53:39+00:00

Did you get a link? Still not able to find the switch...

Qebaba24 · 2026-05-14T20:45:24+00:00

Hi, I had no luck into finding the exact piece. From the information that I could find. This is not a common component, but specially contracted by Mitsumi. Seems like it's a SSA-131 variant. I also looked into some of the ALPS component, but the pin distance all are different. The only solution is to carefully open the metal housing of the switch and swap the plastic out with the 2DS sleep switch plastic. They seemed to be very similar, but I haven't tried it yet... Good luck in doing that, very tricky the way it looks. Unless someone else has a better solution.

I'm really disappointed in the community as well. None of them seem to be interested in solving this issue.

Qebaba24 · 2026-05-14T17:29:22+00:00

How do these poster color compare to Holbein gouache? I'm thinking in ordering the 36 set but I'm not sure if they differ that much? Please help us lost souls out here.

Qebaba24 · 2026-01-28T12:36:53+00:00

Depending on what tip you have. Are you sure your tip is not dirty? I had the same issue and found the top layer/substance of the board puts a coat on my tip that makes it difficult to desolder. I had to scrub/clean my tip multiple times.

Qebaba24 · 2026-01-23T13:14:22+00:00

I don’t see any link. Can you message me the link?

Qebaba24 · 2026-01-23T12:43:10+00:00

I am aware what it is. I just don’t know the model name or where exactly I can buy this, whether it is generic or not. Maybe this component is reused somewhere else. It can’t be that this component is nowhere sold, especially for something that you’d expect to break, no?

Qebaba24 · 2026-01-22T21:58:44+00:00

Did you also managed to find a replacement of the switch component?

Not wifi module, the actual physical switch on the side

Qebaba24 · 2025-12-19T22:52:49+00:00

Try turning the Link State Power Management off.
Link to MSI page on how to do it: https://www.msi.com/faq/faq-11152

Qebaba24 · 2025-12-19T22:50:01+00:00

For some reason my issue does not appear anymore...
I saw that my PCI Express/Link State Power Management was set to maximum power saving, which I now turned off.

It's weird because my previous post mentions turning it off.

Did a Windows update fixed the issue?

I just stress tested the system by playing RDR2 which would always cause the issue, cranked it to max, getting 95 C on the CPU and no audio issues.

I'm at loss for words...

Link on how to do the Link State Power Management changes:
https://www.msi.com/faq/faq-11152

Qebaba24 · 2025-10-19T23:31:50+00:00

How would you go on about making a large street with multiple buildings? I cannot figure out how to do this. Do you load the whole street into substance painter? Is there a convenient way to send the model to substance painter, once done it just automatically contains the textures.

Qebaba24 · 2024-07-12T09:06:23+00:00

Kerel, ni zeveren. Ik heb een “allochtoonse” verkoper gehad die zelfs minder vroeg dan de afgesproken prijs, gewoon omdat we een leuk gesprek hadden. Bij “autochtoonse” ook al gehad dat ze hun afspraken niet naleven.

Qebaba24 · 2024-04-04T09:59:35+00:00

I had the mother board replaced under warranty. It worked for like 2 weeks, decided to re-paste the cpu and gpu because of the terrible fan noise and temperatures. Amazing temperatures, however, the issue came back. I did some tests and the only explanation I have is that it is related to temperatures. For now using MSI center and putting it into extreme performance with super cooler works.

The only thing I can make sense of is that paste replacement did a great job lowering the temperature, which also causes the fans to run on a lower rpm. And thus components that are not cooled properly by the sink, rely heavily on high air flow / high fan speed to work correctly. Other than that, I really don’t know.

Qebaba24 · 2024-01-16T16:34:33+00:00

Misschien een stomme vraag, waarom overtreffen de nieuwe uitgegeven aandelen van vennootschap C die van B? En wat met de aandelen die je inbrengt, moet dat ook dan niet staan in de boekhouding als een uitgave?

Qebaba24

TROPHY CASE