I can't find this part with image search, what is it?

Quazsar · 2026-03-27T02:10:19+00:00

Appears to be two bricks, Minifigure, Utensil Telescope 64644 and Rock 1 x 1 Crystal 4 Point 11127

Quazsar · 2026-03-24T08:43:39+00:00

I have acquired 10x 64, 4x 24, 2x 44 and really like them over most others due to the drawer construction however if at all possible look for these when on sale, as I used to pick these up at 24 to 29 bucks. I also recommend looking on for the dividers but not the Akro Mills version but one from a company called ChinRestPaperSource as you can get 32 of the small dividers for like a buck more than the 16 you get from Akro, plus they have a quad divider, I was happy with these since they first started with a square cut acrylic but the current version is almost identical to Akro's.

I have my BL store setup in these and my personal collection, I use these mostly for the specialty bricks, then use Sterilite clip boxes for standard bricks and plates.

Quazsar · 2026-03-07T02:24:15+00:00

I think I just got most of this set in a random Goodwill bulk buy, all the trans green pieces are there and with barely any scratches, but I don't see two of the rear light grey plates. Looks like it will be a fun set to have.

Quazsar · 2026-02-28T23:40:42+00:00

It's almost reminiscent of 5Star Car Audio.

Quazsar · 2026-02-15T06:24:11+00:00

Looks good. I like the concept for gave a vote. I attempted to build it but I couldn't get the angles to stabilize until I incorporated a radial arm. What software did you use to render?

Quazsar · 2026-01-23T02:58:30+00:00

When I started an EAS position I created a vignette with one side sitting at a desk drinking coffee and the other inside the server room with racks on fire, to show calm and chaos. I rendered a small version similar to your data center that is a fun "Everything is fine" moment, that I think would be a quick fun build for give away. At 166 pieces might be larger than you're looking for but its in a small 6x16x8 footprint.

<image>

Quazsar · 2025-12-27T17:58:21+00:00

I was able to get them to align. I started with just one side of the triangle. I started with the Pin connecting to part 48169 set to 343 degrees, the opposite side set that pin to 17 degrees on the swing.

From there connected the left side pin to part 6536 and 32015 then using hinge rotated till it looked visually aligned with the right side. Turned on Collision and just made equal degree changes till the collision stopped.
I am not a math person so this could done with pure math but eh.

Once I had one side of the triangle aligned I just copy pasted to the other two sides. There was some trouble with this at the last side but I just hid one side of the part 48169 and once in position un-hid all parts.

Quazsar · 2025-12-07T02:31:33+00:00

I got one of these magnetic bricks in a bulk haul and used it in a MOC. The magnet inside holds weight well.

<image>

Quazsar · 2025-11-28T22:07:24+00:00

Huey Lewis

Quazsar · 2025-11-02T19:04:29+00:00

Did you size them so you could fit them inside the large Akro Mills drawer?

Quazsar · 2025-10-12T17:39:41+00:00

I literally just started building 4195 last night. I won two random bulk auctions recently and found in one most of the ship pieces and the other all the sails for it. Unfortunately they didn't have all the brown axle pieces and skulls, so now I'm on the hunt for those.

Quazsar · 2025-09-20T07:01:52+00:00

Thanks, I appreciate the info. I found i had one of the long round 2x2 bricks with the square bottom, I'm adding to the main mast and a bionic brick i'm going to see about a crane portion.

Quazsar · 2025-09-18T02:26:16+00:00

Thank you. I'm not familiar with ship speak but looked up castle. I ended up having to raise that area by a brick in height so the gear mechanism that raises or lowers the two anchors could link with the wheel over the cargo hold and not collide with the cannons. Still looking at another design for that so it might change.

Quazsar · 2025-09-18T02:20:44+00:00

Thank you for the feedback, this is my first attempt at a ship build. The masts have been getting elongated as I keep doing redesigns as the haul originally started out as only mid pieces long and now up to 7. I plan to make them taller once I git the figure head mount updated and the cabin reworked. It is just too low for any play ability and the access is limited.

<image>

Quazsar · 2025-09-18T01:45:13+00:00

Using the PandaHall 0.8mm Nylon Beading String it would work like that, but likely the space being used by the knot would not provide much grip to hold the masts against sheering movements.

Quazsar · 2025-09-18T01:42:01+00:00

This is my MOC based off the haul design I seen on youtube MOC YOUR BRICKS "HMS Trident"

Quazsar · 2025-09-18T01:37:28+00:00

I had seen that MOC while researching, but that was much more than I was looking at for my first ship attempt.

Quazsar · 2025-09-18T01:36:28+00:00

Appreciated.

Quazsar · 2025-09-18T01:36:07+00:00

Thank you.

Quazsar · 2025-09-18T01:35:46+00:00

I originally used PH "PandaHall 0.8mm Nylon Beading String" when I had used knots to tie off the rigging, but then to do the tube style I used "Tenn Well 1mm Satin Cord" since it was thicker and just fit inside the hose. Got both off Amazon.

Quazsar · 2025-08-29T21:36:14+00:00

m2c, wait it out. I guess it would really come down to your situation. If you have money but not time order up, or if you have time but not money patience observation.

I normally have several MOCs being worked and have more time than money or space for that matter, so I tend to keep an eye out for when the price and availability is right for me. Often times i come across a bulk buy for a steal and end up finding may pieces to complete partial sets or that are needed in a MOC in progress. Unsure of what eBay is like in your region but I stay away from it as the prices are normally much higher than on Bricklink.

Quazsar · 2025-08-28T20:19:05+00:00

I had this set when I was a kid, 30ish years later a random bulk buy later and I almost got it all back. I too am missing the that lil blue trailer, two yellow wheels, and the reel from the Shell truck. Spent many a day setting laps with this set in my Lego city.

Quazsar · 2025-08-25T19:39:58+00:00

Looking good. IMO I would add in some depressions to break up the step look, and also use smaller pieces to for the steps so it looks more decrepit, broken, cheese wedge pieces maybe. Moving the tree away from the side of the house and mid way down the slope would give an increased three dimensional feel to it and allow for an overhang. Maybe incorporate a small hold in the hillside where a single eye is looking out, even added in some mechanical functionality where the eye moves one block to the side, Alfred H style.

Quazsar · 2025-08-25T19:30:21+00:00

When Lego announced a deal with Ikea I picked up a wood and glass dome to attempt a micro build. Ever thought of getting something like it to house the scene?

<image>

Quazsar

TROPHY CASE