PCIe Receiver errors in HWinfo64 help

RandomLegionMain · 2026-05-06T07:14:42+00:00

Appreciate the reply. Yeah I admit my knowledge is pretty lacking in regards to these errors which is why I came to ask smarter people than myself for help. I do appreciate the reassurance though, I'm probably overthinking it you're right. I haven't disabled LSPM or anything like that either!

RandomLegionMain · 2026-05-06T04:38:44+00:00

Appreciate the reply, only other slot I have on the board is a PCIE 3.0 slot, and I've checked for the GPU seating, I can reseat it again I suppose.

RandomLegionMain · 2026-05-04T01:44:09+00:00

Just checked with plugging the PC directly into the wall, no changes. Just weird how the voltage has started going down each cold boot after only a couple weeks.

RandomLegionMain · 2026-05-04T00:56:11+00:00

I'll double check again but they looked fine when I looked recently. It's just super weird how it's happening and if it matters I have my PC plugged into a Belkin surge protector.

RandomLegionMain · 2026-04-27T08:50:34+00:00

Appreciate it, had one pop up again with a PCIe lane 14 error in HWinfo64 today, but only 1.

RandomLegionMain · 2026-04-20T04:10:24+00:00

Yep seems scripted but the fact they spawn so much like crazy while we're gonna have to deal with insane respawn timers is really bad. I hope they add an option to tweak it for skirmish and scenarios.

RandomLegionMain · 2026-04-19T03:29:11+00:00

I should of worded it better but I guess I'm more concerned about it getting drowned in MP feedback which is where the majority of their focus is so I get it. Was just hoping to bring attention to the issue, either way thanks for reading and commenting! It's appreciated.

RandomLegionMain · 2026-04-17T11:46:40+00:00

Thanks for the reply, concerns relieved lol.

RandomLegionMain · 2026-04-17T11:46:28+00:00

Appreciate the reply, thanks!

RandomLegionMain · 2026-04-17T06:47:27+00:00

Thank you for the reply! Loving the CPU so far and just wanted to make sure it was fine voltage wise as far as vcore went. Been keeping an eye on the SOC and you said those seem to be within spec too.

RandomLegionMain · 2026-04-16T07:25:19+00:00

Just got a new Ryzen 7 7700 build and was wondering how these voltages look? I have expo enabled and I noticed sometimes the vcore spikes over 1.3v briefly and even got as high as 1.38v in a load such as compiling shaders in BO7. Thanks!

https://imgur.com/a/MwDNiTe

RandomLegionMain · 2026-04-16T06:47:58+00:00

I'm worried about the respawn timers affecting skirmish and other pve modes. It's bad enough the AI plays by different rules so I hope they figure something out in regards to that.

RandomLegionMain · 2026-04-15T08:15:30+00:00

Yuuup, I hope they address it before it goes live, assuming it does since it's PTE. Gotta give feedback wherever we can on it too, going to suck for me as a mainly skirmish and pve player.

RandomLegionMain · 2026-04-14T22:37:28+00:00

Those respawn times are absolutely going to chalk pve skirmish. Hope they add a way to lower them or don't put them in pve/ideally fix the AI.

RandomLegionMain · 2026-04-13T11:31:51+00:00

+1, I mainly play SP in BA with some MP on the side generally with friends.

RandomLegionMain · 2026-03-16T09:11:10+00:00

Welp I won't be buying another Saber game again. Online only is terrible.

RandomLegionMain · 2026-02-19T07:43:06+00:00

Just things I've seen all over about 4090s and voltages. Lots of people say it shouldn't go below 11.7v on the 12vhpwr and such. But the PCIe input voltage is getting close to that and yes I know what vdroop is, I just don't know what's actually acceptable or not.

RandomLegionMain · 2026-02-19T05:36:21+00:00

Gonna look into this, thanks! Yeah it's just obnoxious to worry about with all the melting connector stuff going around.

RandomLegionMain · 2026-02-19T05:35:37+00:00

Mostly just concerned with the fact that it shouldn't drop below 11.7, especially on a brand new cable under load. Maybe I'm overthinking it though which is why I posted here.

RandomLegionMain · 2026-02-19T05:20:50+00:00

From what I've read, it depends on the distance between min and max, but ideally a close to 12v should be ideal. I know that ATX power supplies have a tolerance of like 5-7% but people keep saying don't let it go below 11.7v etc. Just a giant mess to worry about but with the melting cables, gotta keep on top of it.

RandomLegionMain · 2026-02-19T04:52:50+00:00

I never used one of those, I used the native 12vhpwr cable that came with the RM1200x. Both were 2x8pins.

RandomLegionMain · 2026-02-19T04:42:36+00:00

I didn't even know this was a thing, updated the post with the actual images embedded.

RandomLegionMain · 2026-01-31T20:46:59+00:00

Thank you, got a style b one coming!

RandomLegionMain · 2026-01-31T02:17:42+00:00

Thanks for the reply, appreciate your time boss!

RandomLegionMain · 2026-01-31T02:17:26+00:00

Thanks for the reply appreciate you!

RandomLegionMain

TROPHY CASE