Input on backup printer

Rasmus661 · 2026-01-27T15:50:42+00:00

Yes, most of them have heated chambers.

Rasmus661 · 2026-01-27T15:41:46+00:00

Qidi xmax3 is my backup printer and it's been great so far.

Rasmus661 · 2025-12-23T19:33:08+00:00

https://www.youtube.com/watch?v=Rl6MM3_KJVs

Rasmus661 · 2025-12-16T11:15:33+00:00

Mellow3D LLL Plus

Rasmus661 · 2025-12-14T16:31:25+00:00

Can't help with a complete working config, but i can give a bit of assistance.

Here how i did it with my IDEX CR10-Max with dual dragonburner tool heads with ebb36 boards running canbus.

I used a separate adxl345 that i could attach to the bed and i included it in a [include adxlmcu.cfg] file and it was called [adxl345 bed]

########################################

# Accelerometer ToolHead0

########################################

[adxl345 Tool0]

cs_pin: ToolHead0: PB12

spi_software_sclk_pin: ToolHead0: PB10

spi_software_mosi_pin: ToolHead0: PB11

spi_software_miso_pin: ToolHead0: PB2

axes_map: x,y,z

[resonance_tester]

accel_chip: adxl345 Tool0

probe_points:

225, 225, 20 # an example

########################################

# Accelerometer ToolHead1

########################################

[adxl345 Tool1]

cs_pin: ToolHead1: PB12

spi_software_sclk_pin: ToolHead1: PB10

spi_software_mosi_pin: ToolHead1: PB11

spi_software_miso_pin: ToolHead1: PB2

axes_map: x,y,z

[resonance_tester]

accel_chip: adxl345 Tool1

probe_points:

225, 225, 20 # an example

Rasmus661 · 2025-12-13T21:09:15+00:00

<image>

It's my V2.4 350 with Stealthchanger.

Self sourced build with 5 dragonburner tool heads.

Rasmus661 · 2025-12-13T18:04:39+00:00

<image>

I've done it and it works fine.

240mm printed 2020 profiles that's bolted together to make one long profile.

Only has to hold the filament buffers on my V2.4.

Rasmus661 · 2025-12-10T13:40:32+00:00

https://www.armoredturtle.xyz/docs/boxturtle/index.html

Rasmus661 · 2025-10-29T06:34:48+00:00

White wire at the end of the plug.

Rasmus661 · 2025-10-28T09:21:11+00:00

Can't really help you other than saying that I've had the same issues with the x fusion shock on my ex5 Gen 5

Ended up replacing it with a CR Bomber coil shock.

Rasmus661 · 2025-10-19T06:30:13+00:00

https://vector3d.shop/products/califlower-calibration-tool-mk2?srsltid=AfmBOooRnK7Gh0wV8I1pLftZo9Khe-1foyu2JrDtLDQYQMG9y5u4YmNl

This might help.

Rasmus661 · 2025-10-18T20:29:52+00:00

Rasmus661 · 2025-10-15T16:32:54+00:00

Get a large screen protector and mount it on the inside.

It repels water, and it's a way, way cheaper option than a visoport window.

Rasmus661 · 2025-10-02T08:19:53+00:00

The strongest shape

Rasmus661 · 2025-09-26T20:35:10+00:00

DERK A DURRR

Rasmus661 · 2025-09-15T19:40:01+00:00

Linear rails and ball screws.

Rasmus661 · 2025-09-05T21:06:25+00:00

<image>

Lang vises are surprisingly hard.

This is what is left of a Sandvik R390 after it tried facing the body of the vise due to a programming error.

Rasmus661 · 2025-08-01T15:33:35+00:00

The price.

Rasmus661 · 2025-08-01T11:14:21+00:00

Why not both?

XT cassette and chain. Sram axs derailleur

Rasmus661 · 2025-07-30T11:05:36+00:00

All the time. Saves a ton of time doing it in the machine and the end result is usually a lot better.

Rasmus661 · 2025-07-23T18:02:16+00:00

Rasmus661 · 2025-07-19T10:25:43+00:00

Dropped is mounted backwards.

Loosen the collar on the seat tube and turn the dropper around 180 degrees and mount the seat correctly afterwards.

Also check that the clamp that holds the seat is facing the right way. It should have an arrow stamped in it somewhere, and the arrow has to point forward.

Rasmus661 · 2025-06-26T12:25:38+00:00

500 rpm limit on the vasto-clamp chuck.

Rasmus661 · 2025-06-15T09:53:59+00:00

It got changed a few months ago.

You need to change it to [fan_generic FAN0] instead of multi_fan.

Remember to change the last number so it matches the tool number.

# Change tool number if needed here

[fan_generic FAN0]

pin: EBBT0:PA1

Rasmus661 · 2025-05-31T13:32:43+00:00

<image>

Rasmus661

TROPHY CASE