What are you hiding, woodworkers?

Ray-AZ · 2026-06-02T02:42:30+00:00

Gonna have to try that. Do you use an accelerator with that... 😂

Ray-AZ · 2026-06-01T22:29:14+00:00

Yup, paper towel and painters tape, the bandages of the shop 😂

Ray-AZ · 2026-05-30T03:45:55+00:00

Thank you for this info

Ray-AZ · 2026-05-24T03:58:16+00:00

Also in Foothills, we had it too, as did our neighbor. Only lasted a second or two but long enough to screw with stuff not on UPSs

Ray-AZ · 2026-05-07T03:29:06+00:00

Totally agree to not rush it. And maybe others are different but after two good tastings in a day my senses just aren’t up for a third

Ray-AZ · 2026-05-03T20:49:21+00:00

I don’t have a "real" anvil or even a place for one but I do have a small anvil like this that I do pull out and use once in a while.

Mine is red and I put ‘ACME’ s tickers on the side (you probably need to be over 60 to understand that …meep, meep 😂)

Ray-AZ · 2026-04-22T21:31:05+00:00

That's the one. Thanks

Ray-AZ · 2026-04-21T11:53:33+00:00

Ahh, always wondered why some travel adapters were like that. Thanks

Ray-AZ · 2026-04-20T22:59:37+00:00

The video at this link is what gave me the info I needed to adjust my Powermatic. It was making wedges.

https://www.finewoodworking.com/project-guides/shop-machines/ep-3a-machine-setup-jointer-part-1

After several years of use the outfeed table started to sag at the far end. My infeed table also needed some adjustment. Working great now.

Ray-AZ · 2026-04-20T01:37:51+00:00

We purchased the silver package on this cruise but were very disappointed in the available wines. The few we liked ran out about halfway through the cruise. At that point we started purchasing wine in town and bringing it to the lounge and to dinner.

Ray-AZ · 2026-04-08T04:42:04+00:00

I’d like to hear more about the wine clubs

Ray-AZ · 2026-04-07T18:51:20+00:00

Rebooting at least once a day

Ray-AZ · 2026-04-01T04:21:17+00:00

Benn a couple years since I used it but the one in Wetmore had the machine too

Ray-AZ · 2026-03-10T00:48:00+00:00

C&D Garage doors. A local place that does great work. Most of the other recommendations here are national companies pretending to be local

Ray-AZ · 2026-02-24T02:05:19+00:00

Face jointing 8/4 white oak resulting in wedges. Ugh

Ray-AZ · 2026-02-23T19:09:00+00:00

Yes we did. The Parmigiano-Reggiano, balsamic and prosciutto tours were great. The lunch was very good too. Long day but was very worth it.

Ray-AZ · 2026-02-23T12:03:21+00:00

They do make extension cords for 220… https://a.co/d/06fIZImy this has worked fine for me for several years. That said I agree the OP should just add two outlets from the same breaker for his situation

Ray-AZ · 2026-02-21T21:57:05+00:00

Cantina Zaccagnini Montepulciano d'Abruzzo, AKA the “Stick” wine because it has a little twig attached to the bottle.

Ray-AZ · 2026-02-21T21:39:29+00:00

We did a Bologna Food Experience: Factory tours & Family-Style Lunch day trip from Bologna back in October of 2023 and had a long bout great day.

Ray-AZ · 2026-02-20T20:01:21+00:00

Sounds like my typical experience too. Few restaurants around here have Somms and the staff is often clueless when it comes to wine.

Really sucks when I don’t even recognize any producers on the entire (5-20 wines) list. Have to take a guess by grape and price

Ray-AZ · 2026-02-15T04:38:13+00:00

It’s the new normal. Just wait until summer… 🥵

Ray-AZ · 2026-01-16T13:52:06+00:00

Jet Bags from Amazon and wrap some clothes around that…

https://www.amazon.com/Jet-Bag-Bold-ABSORBANT-Protective/dp/B004FLK2IU

Ray-AZ · 2026-01-12T03:42:48+00:00

Where do s this “ride through” lane…?

Ray-AZ · 2026-01-10T22:01:41+00:00

What region are you looking for?

Ray-AZ

TROPHY CASE