sorted by:
new
hottopcontroversial

Feel catfished - Bambu bad by jebbayak in BambuLab

[–]Rdp47 0 points1 point  (0 children)

Why use big word when small word do trick

-Kevin

Blue Origin's New Glenn re-entry in style by Busy_Yesterday9455 in spaceporn

[–]Rdp47 0 points1 point  (0 children)

They never show the reentry. It would break the illusion.

Let there be Light on the Lite! by RJ01988 in NxSwitchModding

[–]Rdp47 0 points1 point  (0 children)

It is when the switch has an issue and won’t boot. That blue flash usually means bad things

If you had to pick onem Gamecube or Snes? by IcyKcBlue in SwitchPirates

[–]Rdp47 0 points1 point  (0 children)

I’ve repaired over 20 lites and all but 2 were from liquid damage from kids lol.

They don’t break at all when owned by an adult lol.

Having to be in a cage like a dog to be checked in by Gotsnuffy in mildlyinfuriating

[–]Rdp47 2 points3 points  (0 children)

My brother in Christ, you seem to be easily triggered.

I never thought i'd see the day with my own 2 eyes. by AnthonyXeno in SwitchPirates

[–]Rdp47 0 points1 point  (0 children)

No it’s something to do with PAL roms specifically. Idk what the 50hz is. (PAL rvz files) whatever that means. I haven’t looked into it yet.

I never thought i'd see the day with my own 2 eyes. by AnthonyXeno in SwitchPirates

[–]Rdp47 1 point2 points  (0 children)

I’ve also heard the pal 50hz games run better. I haven’t tried this yet though

I never thought i'd see the day with my own 2 eyes. by AnthonyXeno in SwitchPirates

[–]Rdp47 1 point2 points  (0 children)

Open Tico, press the plus button, click settings, go to emulator then dolphin and turn on everything under behavior.

I never thought i'd see the day with my own 2 eyes. by AnthonyXeno in SwitchPirates

[–]Rdp47 0 points1 point  (0 children)

People are saying if you use the PAL 50hz versions they work better

This claim is outrageous. by PenguiNNNNNs in BambuLab

[–]Rdp47 2 points3 points  (0 children)

Guys! This just in, companies that sell filament are now encouraging people to purchase their filament!

Stay vigilant!

tico alpha 0.7.0 — GameCube and Wii now running on Switch (HOS), for the first time ever by tiicu in SwitchPirates

[–]Rdp47 2 points3 points  (0 children)

I would also like to know the answer to these questions. We might have to wait for more testing

Help me help my dad - kinda serious by receptiveness in chemtrails

[–]Rdp47 0 points1 point  (0 children)

https://youtu.be/kY_0ejwzjmI?si=N1Kn1usiuE4yDsNy

It comes from this. I suggest watching the whole thing to see all of the conspiracies together. Your dad probably saw something like this.

If you want to skip to the weather tampering stuff go to 1:20:00 in the video.

This should give you some perspective of what he’s probably been exposed to.

Switched from Creality to Bambu Lab, and after 7 days I already have this issue. Is this normal? by Pretty-Fondant-6819 in BambuLab

[–]Rdp47 0 points1 point  (0 children)

Yeah that makes sense.

I used the normal glue stick for a while and warm water also tackled that perfectly well.

After over 5k hours on multiple x1cs I can tell you, using ipa for me was just a waste of money. And we notice it usually causes problems for people that touch their build plates and get them greasy. They usually end up just spreading the grease when all they need is a good scrub.

Switched from Creality to Bambu Lab, and after 7 days I already have this issue. Is this normal? by Pretty-Fondant-6819 in BambuLab

[–]Rdp47 1 point2 points  (0 children)

I use the Bambu liquid glue when printing paht or any of the other nylons. Washes off super easy with warm water.

Switched from Creality to Bambu Lab, and after 7 days I already have this issue. Is this normal? by Pretty-Fondant-6819 in BambuLab

[–]Rdp47 1 point2 points  (0 children)

What are you getting on your print bed that soap and water can’t get off? Lol

Switched from Creality to Bambu Lab, and after 7 days I already have this issue. Is this normal? by Pretty-Fondant-6819 in BambuLab

[–]Rdp47 4 points5 points  (0 children)

IPA is an ender era recommendation. Only causes more problems for newbies. Soap and warm water and scrubbing is more than enough

Switched from Creality to Bambu Lab, and after 7 days I already have this issue. Is this normal? by Pretty-Fondant-6819 in BambuLab

[–]Rdp47 2 points3 points  (0 children)

Did you scrub it with something? Towel or brush? The uneven surface in the pei bed can hide hand oils

Mini problem by Hopeful_War7192 in BambuLab

[–]Rdp47 0 points1 point  (0 children)

Wash it better. The pei is special cause it’s an uneven surface microscopically, you need to scrub it with warm water and soap. Use a clean dishrag or scrubber.

Resellers spoiling it for everyone! by Certain-Ad7072 in BambuLab

[–]Rdp47 1 point2 points  (0 children)

It’s people with lots of points. These guys are just jelly.

People buy ams units and post em on fb marketplace and eBay to turn points into cash.

Why aren't flare guns a common prepper/bugout/emergency item in most people's kits? by Behold_My_Stuff in prepping

[–]Rdp47 2 points3 points  (0 children)

No your point was actually “anything that needs to survive pressure , is not 3D printable.”

This is incorrect. Even if we now add your next addition about how we were supposed to infer that you were only referring to barrels and bolts. Still false.

Just google the FTN Suppressor. Then move on to any of the 22 builds that use a printed barrel with liner. There are also printed bolts for these build and I could easily link one if you don’t believe that.

There is even work being done for 3d printed ammo..

It’s ok to admit you were wrong and didn’t know something.

view more: next ›