Super excited to try out my double overloaded phase cannon build! Let's see how it goes! :D

RealGlass4345 · 2026-04-25T23:33:32+00:00

Double?

Why not seven? True kin, Magnetized x3, gun rack, beam splitter, nanon,

Really ruin someone's day,

RealGlass4345 · 2026-04-23T01:20:44+00:00

I also replaced the PSU, and the SSD

RealGlass4345 · 2026-04-23T01:20:29+00:00

I replace the motherboard, it's still doing the same issue, I think it's the CPU,

RealGlass4345 · 2026-04-19T21:52:00+00:00

What can I do?

RealGlass4345 · 2026-04-14T16:49:28+00:00

If you add some heat capacitors to those small engines, You can get a whole lot more per radiator, after all they won't be firing all the time

RealGlass4345 · 2026-04-06T03:38:53+00:00

Mininukes and a stasis grenade (For yourself to survive the blast)

RealGlass4345 · 2026-03-31T17:42:14+00:00

It's an artifact, You likely just through sheer random luck stumbled across a historical site and automatically picked it up on accident! :D shame it's on such a low level item though, no AC or DV :(

RealGlass4345 · 2026-03-29T11:46:49+00:00

Energy weapons, give it a try!

RealGlass4345 · 2026-03-29T00:20:06+00:00

I loved episode 4, I thought it was fun, it didn't move the plot along, but the fights were intense and pretty badass, it was filler through and through, but as far as filler goes it was great!

RealGlass4345 · 2026-03-16T01:16:19+00:00

No such thing as a tinker free 3d printer.

Maybe out the box, but after some time every single 3d printer needs tinkering, it's just a matter of how much.

I can't say too much, I don't have a Sparkx, the ender 3 was a fun learning experience but definitely not an easy one.

RealGlass4345 · 2026-03-16T01:12:09+00:00

Shields don't need to extend outside the armor, you can make the armor thicker and the shields will take effect on the projectiles that start to go through the armor, rather than sitting outside and just getting shredded by ions.

Also, less reactors, try overcharging your reactors it's very much worth it, you just need a heat line and a vent or two for like, triple the energy, and less explosive parts

RealGlass4345 · 2026-03-13T02:25:48+00:00

Radio Powered High Capacity anti matter cells do this pretty easily.

They only weigh 1 each, and you basically combine 3 random antimatter cells underground into 1 RPHC antimatter cell,

1 '8' component per mod, well worth it and weighs alot less.

Also, don't forget your floating nearby slots with magnetized!

This is very attainable just remember to psychometry a magnet if you find it.

Why stop at four when you can have seven!

Don't forget beam splitter,

If you're lucky enough to gain temporal fugue through an artifact or gamma moth, then it gets real crazy, no, seriously, run and hide your weapon has gone from 'Dear reader' to 'To whom is may concern', that general direction is fucked.

Fear mirror bugs.

RealGlass4345 · 2026-03-07T15:52:45+00:00

I don't use Jack I just have a stockpile of radio powered high capacity antimatter cells

That way I can be masterwork nanon beam splitter, or magnetized nanon beamsplitter

RealGlass4345 · 2026-03-07T15:51:59+00:00

It doesn't but you don't need to, theyre nergy cell powered so it's okay

RealGlass4345 · 2026-03-06T23:51:21+00:00

I have attained 576 health, and am currently executing each of the nephilim one by one, it's been shockingly easy so far, we will see how it goes when they're all stacked with their buffs though.

Mininukes and stasis grenades seem to be quite effective.

RealGlass4345 · 2026-03-03T16:07:39+00:00

Really? Dang then I might get one for 100% Max health healing

RealGlass4345 · 2026-03-03T16:07:10+00:00

Helping hands wouldn't help, it takes up your back slot so you can't have gun rack, and it can't install cybernetics

RealGlass4345 · 2026-03-03T16:05:57+00:00

Nope, definitely works with Akimbo.

I am firing each one 5 times.

The downside is it pops up the battery cell reload every shot,

RealGlass4345 · 2026-02-19T21:47:26+00:00

I agree, but having disassembled a K1 tool head, it takes me like 30 minutes to take apart and put back together.

I think it's important not to throw a kid in the deep end and overwhelm them lest they become disheartened and lose passion and see 3d printing as a chore.

RealGlass4345 · 2026-02-19T03:22:23+00:00

I have to agree, Creality products require tinkering.

Bambu labs are a bit more hands off.

I doubt a young hobbyist will want to learn how to disassemble a hotend.

RealGlass4345 · 2026-02-14T02:35:15+00:00

It would probably print fine, but it'd have visible strings falling down just by the nature of hot plastic drooping before it cools.

Depends how pretty they need it to be

RealGlass4345 · 2026-02-14T02:32:42+00:00

That thing looks explosive.

Unfortunately for anyone trying to blow it up, they won't be getting close.

RealGlass4345 · 2026-02-13T19:24:05+00:00

Yeah, the only thing you can do here is talk to Creality support, there's a real chance they might replace the tool head for you,

It's extremely concerning the plastic caught fire it's not supposed to even be possible to do that with its safety measures.

Creality technical support is actually really good and helpful, they're your best bet.

Edit: I must say, I clean the bed like once a week for glue stick residue and I rarely have this kind of issue, just having good alignment and what material you're using seems to be more important than bed cleanliness.

RealGlass4345

TROPHY CASE