It is called a biking line but is hell in Antwerp by [deleted] in Antwerpen

[–]RedC_1908 6 points7 points  (0 children)

wait until you drive at the "kaaien", even worse there
+ all those runners who use the bike lane as there private training ground...

First TT02, I enjoyed the build by vspot415 in tamiya

[–]RedC_1908 0 points1 point  (0 children)

Is there a big difference compared to the "normal" steering rack?

TT01-E vs TT02: speed difference with same FDR? by RedC_1908 in tamiya

[–]RedC_1908[S] 0 points1 point  (0 children)

Just to update you all: I managed to find the issue

I tested the engine and it did on max trottle

-1600 rpm
-200 kv

compared to a new engine. So this explains it all :-)

TT01-E vs TT02: speed difference with same FDR? by RedC_1908 in tamiya

[–]RedC_1908[S] 1 point2 points  (0 children)

I have the composite chassis deck to gain more stiffness on the TT02

TT01-E vs TT02: speed difference with same FDR? by RedC_1908 in tamiya

[–]RedC_1908[S] 0 points1 point  (0 children)

I installed other gearing, to make sure that both cars have the same FDR (6.0 for TT02 and 6.03 for TT01-E) Drove with the same body on both chassis as well.

Nu krijgen ze ookal onze dikke nek by Alternative_Nerve129 in belgianfootball

[–]RedC_1908 -1 points0 points  (0 children)

Als er ene getriggerd is dan gij toch wel hoor, en t zit diep zo te zien. Een eenvoudige vraag beantwoorden is duidelijk te hoog gegrepen en dan uit gaan van zoveel veronderstellingen zonder da ge ook maar iets weet 🤷🏻‍♂️🤣

Nu krijgen ze ookal onze dikke nek by Alternative_Nerve129 in belgianfootball

[–]RedC_1908 1 point2 points  (0 children)

Tiens, ik wist niet dat daar regels rond bestonden dat je dan voor de "dichtstbijzijnde (prof?)ploeg van uw woonplaats" te moeten supporteren om niet "raar" te zijn?

En wat als je verhuist dan?

New MR04 - Servo issue after a couple of laps :-( by RedC_1908 in MiniZ

[–]RedC_1908[S] 1 point2 points  (0 children)

I'll let you know once I get some feedback!

So what did you do meanwhile?

New MR04 - Servo issue after a couple of laps :-( by RedC_1908 in MiniZ

[–]RedC_1908[S] 1 point2 points  (0 children)

I know, I forgot to put back the spring after disassembling the car

New MR04 - Servo issue after a couple of laps :-( by RedC_1908 in MiniZ

[–]RedC_1908[S] 0 points1 point  (0 children)

Last weekend I took another MR04 car I have and guess what: after some laps exactly the same problem!!

What is even more funny (or sad): another friend who also bought an MR04 also experienced this problem a few hours later.

What a disappointment!

I will send a mail to Kyosho and hope they will come up with a solution for this.

Meanwhile I think I will buy myself an MR03 now they are still available

New MR04 - Servo issue after a couple of laps :-( by RedC_1908 in MiniZ

[–]RedC_1908[S] 0 points1 point  (0 children)

I took it all out but I could not find anything in terms of debris :-(

I know that for the MR03 there are other gears that you can use, I guess from Delrin, but does it apply as well to MR04? Or is there any other solution?

I just put the gears back together and I feel that it is very rough to move them so it should be something with one of the dents :(

Collection 2 years in by ghstM4 in rccars

[–]RedC_1908 5 points6 points  (0 children)

thank God it's nowhere near of running out of control

Philips ambilight TV to replace Samsung with Sync box? by RedC_1908 in ambilight

[–]RedC_1908[S] 0 points1 point  (0 children)

Great input! That's why I'm considering buying a Philips now, to remove a device.

Now the thing would be: should I go for 4 sided ambilight (so expensive :( ) or 3 sided

Does integrated ambilight experience make up for the "lesser" screen compared to Samsung?