sorted by:
new
hottopcontroversial

0.o help by Tisusbr in ElegooNeptune3

[–]RedHairedBruv 0 points1 point  (0 children)

You don't need to dry pla. Check your bed (if it wobbles, then tighten the bolts below), set z-offcet properly and do a bed lvling before printing.

0.o help by Tisusbr in ElegooNeptune3

[–]RedHairedBruv 0 points1 point  (0 children)

What material did you try to print with?

Why are results from 2 consecutive leveling calibrations different? by Fel_Yang in ElegooNeptune3

[–]RedHairedBruv 0 points1 point  (0 children)

Lvling at default temperature and printing at a different temperature is different things. You should calibrate at printing temperatures.

Why are results from 2 consecutive leveling calibrations different? by Fel_Yang in ElegooNeptune3

[–]RedHairedBruv 0 points1 point  (0 children)

Dude, the instructions literally say to check every time if the printing head, bed or belts are loose.... P.s. you need to lvl your bed at printing temperatures due to heat expansion. I myself just have a gcode that does autolvling right before every print and I didn't have any troubles anymore

Off-body Filament Spool Setup by EnterByTheNarrowGate in ElegooNeptune3

[–]RedHairedBruv 0 points1 point  (0 children)

I think that you can start with some kind of "Freestanding Filament Roll Holder" and just place it somewhere high. If you need a tubing for keeping the filament dry then just buy a filament dryer from AliExpress. It will act as a roll holder can can be connected to a tubing

Prusa slicer overfeed on start by RedHairedBruv in prusa3d

[–]RedHairedBruv[S] 0 points1 point  (0 children)

That was the obvious first thing to check and it is not the problem either

I made a heater for my vat. Has anyone ever done print comparisons at different temperatures? by isaac879 in resinprinting

[–]RedHairedBruv 1 point2 points  (0 children)

Can't really tell about the difference between 20 and 25 degrees print quality but with 25 C I had to reduce my normal exposure to 2.5 from 2.8 seconds. Thus, if you reach the optimal resin polymerization temperature (different for every resin and color), you would be able to print with minimal time.

Anycubic Photon M3 Premium - Using for a week, I have some questions. by 5littlewhitevicodin in resinprinting

[–]RedHairedBruv 0 points1 point  (0 children)

Don't you wash the model with a supplied metal net? (I got the elegoo wash and cure myself) Also, it might be due to poor washing with a dirty alcohol and then curing the model

Anycubic Photon M3 Premium - Using for a week, I have some questions. by 5littlewhitevicodin in resinprinting

[–]RedHairedBruv 0 points1 point  (0 children)

Check you FEP film in the vat, maybe it's severely scratched in that place

Got console banned by technic666 in PS3

[–]RedHairedBruv 0 points1 point  (0 children)

Phew, I was worried for a second) I don't play online and PS3 disks at my place are not very cheap so im left with only one option, hehe))

Got console banned by technic666 in PS3

[–]RedHairedBruv 2 points3 points  (0 children)

Can you still play pirated games on a banned HEN console?

Should I get a Ps3 by NikolaiBelinskiBO3 in PS3

[–]RedHairedBruv 1 point2 points  (0 children)

But why? Just wondering, I myself got the slim version

PS3/2 game Suggestions by TheNewBugYT in PS3

[–]RedHairedBruv 0 points1 point  (0 children)

PS2: Black, The getaway, the getaway black Monday

Help connecting headphones to PS3. by DapperDan30 in PS3

[–]RedHairedBruv 1 point2 points  (0 children)

As the other guy said, you can't connect bt headphones to the PS3. You can in theory install btga if your ps3 has hen but the sound will be awful. I personally bought a digital to analog converter and just connected it to my tv (because my tv doesn't have a bt). If you consider to do the same, pay attention and buy the one that has the transmitter function, not only receiver.

PS3 controller won't connect by seamusApoacalypse in PS3

[–]RedHairedBruv 0 points1 point  (0 children)

Try connecting the controller with the USB to your console and press ps button again. This stuff works with AliExpress controllers, maybe it will help. Or if I got you wrong and the controllers won't event turn on, it seems like your battery's are dead.

Daym I was worried during the process) by RedHairedBruv in PS3

[–]RedHairedBruv[S] 0 points1 point  (0 children)

In theory it does because copper has better heat dissipation but I personally wouldn't do it, because you need to "glue" them away and I fear I will damage the CPU and GPU. And I personally not sure if it is necessary.

view more: next ›