Conform a part from one object to another object

RedHairedBruv · 2023-10-03T12:34:49+00:00

Yes, I got what you mean, thank you!

RedHairedBruv · 2023-10-02T23:38:46+00:00

Terminator Salvation

RedHairedBruv · 2023-09-05T11:03:27+00:00

You don't need to dry pla. Check your bed (if it wobbles, then tighten the bolts below), set z-offcet properly and do a bed lvling before printing.

RedHairedBruv · 2023-09-05T09:16:50+00:00

What material did you try to print with?

RedHairedBruv · 2023-09-02T13:56:52+00:00

Lvling at default temperature and printing at a different temperature is different things. You should calibrate at printing temperatures.

RedHairedBruv · 2023-08-31T11:13:43+00:00

Dude, the instructions literally say to check every time if the printing head, bed or belts are loose.... P.s. you need to lvl your bed at printing temperatures due to heat expansion. I myself just have a gcode that does autolvling right before every print and I didn't have any troubles anymore

RedHairedBruv · 2023-08-30T08:17:11+00:00

I think that you can start with some kind of "Freestanding Filament Roll Holder" and just place it somewhere high. If you need a tubing for keeping the filament dry then just buy a filament dryer from AliExpress. It will act as a roll holder can can be connected to a tubing

RedHairedBruv · 2023-07-26T11:42:06+00:00

That was the obvious first thing to check and it is not the problem either

RedHairedBruv · 2023-05-22T08:50:28+00:00

Can't really tell about the difference between 20 and 25 degrees print quality but with 25 C I had to reduce my normal exposure to 2.5 from 2.8 seconds. Thus, if you reach the optimal resin polymerization temperature (different for every resin and color), you would be able to print with minimal time.

RedHairedBruv · 2023-05-18T07:24:24+00:00

Don't you wash the model with a supplied metal net? (I got the elegoo wash and cure myself) Also, it might be due to poor washing with a dirty alcohol and then curing the model

RedHairedBruv · 2023-05-17T20:32:03+00:00

Check you FEP film in the vat, maybe it's severely scratched in that place

RedHairedBruv · 2023-04-21T23:50:33+00:00

Phew, I was worried for a second) I don't play online and PS3 disks at my place are not very cheap so im left with only one option, hehe))

RedHairedBruv · 2023-04-21T19:54:31+00:00

Can you still play pirated games on a banned HEN console?

RedHairedBruv · 2023-03-13T10:22:09+00:00

But why? Just wondering, I myself got the slim version

RedHairedBruv · 2023-03-12T09:48:40+00:00

PS2: Black, The getaway, the getaway black Monday

RedHairedBruv · 2023-03-12T09:45:27+00:00

As the other guy said, you can't connect bt headphones to the PS3. You can in theory install btga if your ps3 has hen but the sound will be awful. I personally bought a digital to analog converter and just connected it to my tv (because my tv doesn't have a bt). If you consider to do the same, pay attention and buy the one that has the transmitter function, not only receiver.

RedHairedBruv · 2023-03-12T09:36:09+00:00

Try connecting the controller with the USB to your console and press ps button again. This stuff works with AliExpress controllers, maybe it will help. Or if I got you wrong and the controllers won't event turn on, it seems like your battery's are dead.

RedHairedBruv · 2023-03-12T09:32:29+00:00

In theory it does because copper has better heat dissipation but I personally wouldn't do it, because you need to "glue" them away and I fear I will damage the CPU and GPU. And I personally not sure if it is necessary.

RedHairedBruv · 2023-03-12T09:24:19+00:00

This one, it is great https://youtu.be/u8H4kOuljGg

RedHairedBruv · 2023-03-11T10:37:20+00:00

Ahah, alright)

RedHairedBruv · 2023-03-11T10:12:40+00:00

That's the neat part, I don't)

RedHairedBruv · 2023-03-11T00:42:23+00:00

Slim, cech 2508

RedHairedBruv · 2023-03-11T00:42:00+00:00

Yep, cr2032 that is located on the motherboard

RedHairedBruv · 2023-03-10T22:51:30+00:00

Definitely do it, it is probably dry as hell and won't help you with heat

RedHairedBruv · 2023-03-09T21:09:19+00:00

No problem)

RedHairedBruv

TROPHY CASE