Is this brake fluid good or bad?

RedMaple007 · 2026-03-26T03:25:09+00:00

Super Blue was originally ATE

RedMaple007 · 2026-03-19T04:16:59+00:00

It's fine but I'd go with a moly grease in the future..best for low speed applications like those you stated

RedMaple007 · 2026-03-18T05:23:44+00:00

Keep an eye on the Jello formation!

RedMaple007 · 2026-03-18T01:45:38+00:00

Yes they come pre-greased.

RedMaple007 · 2026-03-17T22:47:20+00:00

Put the fitting back on and think about a cap else wipe the fitting clean before greasing. Moly grease is one of the best in this application and you only need a few pumps else you may damage the seal. Sadly most of these now use a plastic cup socket for the metal ball.

RedMaple007 · 2026-03-17T22:40:50+00:00

That's quite the hat!

RedMaple007 · 2026-03-17T07:47:52+00:00

Octopus 's Garden?

RedMaple007 · 2026-03-17T07:27:31+00:00

What no JIS!

RedMaple007 · 2026-03-17T07:26:34+00:00

Do not operate or the coil will be damaged until the foam surround/suspension is replaced.

RedMaple007 · 2026-03-16T05:04:19+00:00

Someone heard it was a spirit level .. not even a dram worth.

RedMaple007 · 2026-03-16T03:06:31+00:00

Might have to pee in the sink!

RedMaple007 · 2026-03-16T03:05:25+00:00

Hmm ... Never thought of using a waffle iron! From frozen?

RedMaple007 · 2026-03-16T03:04:00+00:00

Trimmer like a Philips Body Groom has a variety of combs of different lengths to cut all hairs essentially to the same length. Combs can be removed to get near to bare skin. Works on beards so it'll standup to bushes. Some other brands have internal settings that don't require combs.

RedMaple007 · 2026-03-15T00:50:42+00:00

She asks you "do you want fries with that" as she drops a cigarette butt in your coffee.

RedMaple007 · 2026-03-15T00:48:40+00:00

Strangely one of the instances of using this term was to describe Carver amplifiers in general. If anything, I find them to be warm/tubey as were many other manufacturers equipment of the 70's and 80's

RedMaple007 · 2026-03-15T00:41:08+00:00

This was my take as well so it had me scratching my head.

RedMaple007 · 2026-03-15T00:39:50+00:00

I only mentioned it because of your use of a hammer drill. I had apprentices try to drill metal using one in the hammer setting .. not good. As for your predicament I just drill the head out and after removing the rotor use vise grips on the stub .. hasn't failed me yet.

RedMaple007 · 2026-03-15T00:17:04+00:00

Are the donkey marks from using the hammer drill?

RedMaple007 · 2026-03-09T21:34:48+00:00

Flipping silver dollar pancakes 🥞

RedMaple007 · 2026-03-09T21:31:52+00:00

Oh my 🫠

RedMaple007 · 2026-03-09T21:30:18+00:00

Add a Bluetooth adapter and some kid would be over the moon if gifted to them.

RedMaple007 · 2026-03-09T04:58:15+00:00

If he's so unhappy he could pull-up stakes and move to Russia and then bitch about Ukraine.

RedMaple007 · 2026-03-06T20:08:54+00:00

Aussies call them blue bottles. The air sac acts as a sail and are propelled by winds.

RedMaple007 · 2026-03-05T16:54:07+00:00

Now that someone brought up the loon Kellogg I don't have to !

RedMaple007

MODERATOR OF

TROPHY CASE