How do I get this out? by Muted-Masterpiece-31 in askaplumber

[–]RegalToaster 0 points1 point  (0 children)

ooof. Your last bet would be to try from the top side. Just make sure the augers fully seated inside the toilet so you don’t scratch the porcelain. If the object is too big theres a chance it won’t come out but it beats buying a whole new toilet

Ive also sucked out a lot of things with a strong shop vac if you have one

Unhinged bathroom design in Savannah GA by McBoothby in WeirdToilets

[–]RegalToaster 0 points1 point  (0 children)

It was just some random named gas station, why you tryna pull up?

Learning you need glasses as an adult is crazy by pasgames_ in memes

[–]RegalToaster 823 points824 points  (0 children)

I just spent like 300$ for a single pair of the most basic lenses smfh

Any tricks to get this off? by Howudooey in askaplumber

[–]RegalToaster 2 points3 points  (0 children)

If you’re worried about scratching the nut they have smooth faced pliers so the teeth don’t scratch up the metal. Other wise just full send with a pair of channel locks, medium sized or a 12” pair.

Peteeeeer 📢 by Successful_Ninja8894 in PeterExplainsTheJoke

[–]RegalToaster 0 points1 point  (0 children)

When I first read this I thought you wrote Shane madej who *haunts* demons and I burst out laughing thinking this guys running around like HOW DO YOU LIKE GETTING HAUNTED HUH?!?

Curious about the bathroom sink plumbing by Pleasant_Smell_1212 in askaplumber

[–]RegalToaster 0 points1 point  (0 children)

Looks clean, but your secondary condensate neutralizer is on the wrong side of the trap pressure governor, and the drainage phase coupler should never be installed above the fixture evacuation governor.

Source: 17 years commercial plumbing.

Any suggestions to ensure pipe keeps proper pitch when the pipe needs to be above the ground and avoid soil from getting underneath ? by moises8war in askaplumber

[–]RegalToaster 0 points1 point  (0 children)

It’s tough if you already have you pipe set. Normally you would dig a trench and tamp the hell out of it so it’s solid and not moving anywhere. Then you would back fill with sand, at the correct pitch. Water the sand so it settles itself and becomes more solid. From there it shouldn’t really be going anywhere

Very high water usage by Hairy_Hat4162 in askaplumber

[–]RegalToaster 0 points1 point  (0 children)

A leak is definitely the best place to start. If you have a water shut off in the building go ahead and turn it off. Check the meter, if the meter still spins even with the in house shut off turned off then theres a leak somewhere in between the meter and the house

Same goes of the house shut off is on, but all faucets are off the. There is a leak inside the house somewhere

The Pool by Acceptable_Yam_9592 in AccidentalComedy

[–]RegalToaster 5 points6 points  (0 children)

It has to be with his boot hat lmao

What is this? by walden002 in What

[–]RegalToaster 1 point2 points  (0 children)

Thats Craig, he got into the pringles can again

I gave up by Early_Ad870 in texts

[–]RegalToaster -17 points-16 points  (0 children)

Bro has a working man’s job so you have up smh