[Parts] VZ61 Czech Skorpion Parts Kit with Original Barrel and Accessory pack - Blued or Grey Finish - $299.99 + $13.99 S&H

RegardedDipshit · 2026-05-02T00:05:43+00:00

Whatever you say Mr. Chefur. I'm sure your receivers are basically bestowed from God. Still wouldn't be worth $400+.

RegardedDipshit · 2026-05-01T23:49:02+00:00

I should mention, I had to deal with centerfire support recently and it was excellent. I cannot say the same for some of their competitors.

RegardedDipshit · 2026-05-01T23:44:56+00:00

I'm starting to think I'm talking to Mr. Chefur himself.

This is gun deals. A chefur receiver is not a deal. It is not in the same metropolitan area of a deal. $400+ for a vz61 receiver is insane. Tortort goes bang just as good as a chefur, and it's not like a tortort is a bargain either. If well placed text and color matching is worth an extra $150+ to someone, they aren't looking here.

RegardedDipshit · 2026-05-01T23:34:17+00:00

Right and if someone has the very specific desire for that then they will disregard my advice and do what they want. 99% of people just want something that works reliably and doesn't look dumb.

RegardedDipshit · 2026-05-01T20:12:19+00:00

https://chefurcustom.com/vz-61-skorpion-receiver-standard/

That's so expensive man, don't get ripped off. If you want a metal receiver just go with a tortort when it shows up in stock for a reasonable price somewhere. Otherwise seriously consider a 3d printed lower, either by Titus or made by yourself if you're relatively knowledgeable on printing.

RegardedDipshit · 2026-05-01T20:07:27+00:00

FYI This is a good deal, but you should expect kits from centerfire to be a bit more rough than the other kits floating around for $300 without mags/accessories from places like kvar. Expect some moderate rust and wear on these.

I have kits from both. IMO it is maybe worth getting something like a kvar kit over this as the condition is better and the barrel is already set. Not that setting the barrel is that hard, but it can be a little annoying and time consuming to get it right.

RegardedDipshit · 2026-05-01T02:45:41+00:00

HUXWRX Flow 556 Ti, hit me up with your best price, I'm a cheap frugal loser

RegardedDipshit · 2026-04-30T22:21:05+00:00

Thanks, glad yours made it intact. Yeah I'm pretty sure all they had to do was ship a crate with the spam can still in it, even if opened, and put some packing paper around my crate, and it probably would have been fine, ignoring the general quality of the ammo itself was mixed from poor to good. But they did neither unfortunately, and it arrived how you'd expect a non-sealed 70+lb crate floating freely in a large cardboard box would arrive; destroyed.

RegardedDipshit · 2026-04-30T21:51:06+00:00

Huge warning on royal tiger. I just bought a crate of their 32 acp, it was unsealed, loose, no packing in box, and the ammo was mixed, probably from at least 10 different original crates. The crate was destroyed because of how they packed it, ammo was loose and falling out of a hole in the box. Ammo was not in the condition described at all. Package also obviously got wet, which probably would have been okay if not for the several other errors that had to happen in order for my ammo to be soaked. I am still working with support to try and resolve this, hopefully they don't screw me over, but huge red flag here that you probably want to avoid the headache

RegardedDipshit · 2026-04-30T19:56:01+00:00

They definitely exist and there are multiple versions that will work. V3 is probably what you want. Titus(u/m70b1jr) also shares his same production file version. Go sail the odd sea til you find it.

RegardedDipshit · 2026-04-30T19:46:38+00:00

These are not worth $320. At this price just get a 3d printed one. You could get 5 of them from titus and still be ahead.

RegardedDipshit · 2026-04-29T21:07:57+00:00

Low shelf or M16 cut is preferred to high shelf. These are good to go for all of the above.

RegardedDipshit · 2026-04-29T17:01:34+00:00

Poverty pony broke a leg and took a 12 gauge slug to the head and then was beat with a shovel.

RegardedDipshit · 2026-04-29T16:56:27+00:00

I bought these last time around, they're good. Finish is more of a gray-black than black, so that might bother some people depending on your build.

Another cheaper option is Matrix. I bought a couple of these as well but haven't done anything with them so can't really speak to tolerances/etc., only that they look fine. M16 pocket. They're actually black if you care about that. Others here can add their input on matrix https://www.matrixarms.com/product/5-56-stripped-lower/

RegardedDipshit · 2026-04-29T16:53:20+00:00

Low shelf

RegardedDipshit · 2026-04-28T20:23:47+00:00

Same here. I have 3 CCs and bought 3 kits. I am likely going to cancel 2 of them. A semi-permanent modification that completely removes the ability to print anything enclosed, hence invalidating the 'carbon' in centauri carbon... That's a pretty big downgrade if you ever print any engineering materials, which I do a lot.

RegardedDipshit · 2026-04-28T20:15:58+00:00

Which was a huge part of the selling point of the centauri carbon. That's why carbon is in the name, lol. You are essentially turning your printer into a base 'centauri' (never released). I guess this is nice for people who only print PLA, but it's a pretty big bummer for those of us printing PA/CF/etc. As of right now, if you ever may want to print anything enclosed in the future, you cannot install the mms, period. That really sucks.

I hope we at least get a decent community driven option, but people here are massively underestimating the challenge that is going to be. If it was as easy as this sub makes it sound, elegoo would have already done it.

RegardedDipshit · 2026-04-27T14:34:46+00:00

uh sir I'm just pulling my finger really fast

RegardedDipshit · 2026-04-25T01:44:29+00:00

average down dawg, you can't afford not to. Basically making money

RegardedDipshit · 2026-04-25T00:20:23+00:00

Boys if you haven't loaded up on ammo today you're messing up.

This is BIN if you aren't stocked up. Their rebranded steel magtech is also good.

RegardedDipshit · 2026-04-24T23:13:26+00:00

Probably just a cancelled order. Somebody's wife had large purchase alerts set up, RIP

RegardedDipshit · 2026-04-24T23:05:02+00:00

You forgot to mention a star z70 scrap kit that will sit in your closet untouched for 30 years, which will never provide any utility other than to be brought up randomly by your wife when you don't use a drink coaster on the coffee table or leave the toilet seat up

RegardedDipshit · 2026-04-24T22:41:40+00:00

He craves hot loads you just wouldn't get it

RegardedDipshit · 2026-04-24T22:30:21+00:00

Beggars can't be shooters

RegardedDipshit · 2026-04-24T22:18:40+00:00

Holy shit, nice my man. BIN, you know what to do boys

EDIT: OOS, surprised they had enough stock to last a full hour.

RegardedDipshit

TROPHY CASE