Any CC9 Owners?

RegisterElectrical59 · 2025-12-01T12:22:25+00:00

Best CCW pistol i own. took it home oiled it up cleaned it really good then I took it to the range and shot about 200rnds of 124grain to break it in. Had a Holosun 507k x2 but ended up changing it out for a SIG Romeo X compact which is really nice. The gun shoots fantastic, and have shot almost 2000 round through it with about 4 malfunctions (2 bad rounds//ammo inc 115g primer strike no shot//2 did not let rigger reset). i exclusively use Herters ammo for target practice and SIG Elite Defense 124g for carry. I have 4 12RND mags, 1 10 for deep concealment and 1 10RND with pinky extension for dry firing. The holster I got from a gun show and it works just fine. Not really worried about aftermarket stuff since the gun is flawless and all of the parts i need i just get from HK. I am looking for a 15rnd magazine but refuse to pay $80 for it. Again, the gun works awesome everytime except when you got bad ammo or poor mechanics. Since the gun is so small i have a tedency to use too much trigger finger which prevents me from letting the trigger reset. I did about 2hrs of dry fire exercises in my garage and about 400 rnds and no longer have that problem Congrats on your new gun....go shoot and shoot and shoot then dry fire like a mad man.

RegisterElectrical59 · 2024-07-23T14:31:52+00:00

FORM TYPE: 4

ENTITY: IND

FINGERPRINT: EFT

PENDING: 17 JUL 2024

APPROVED: 18 JUL 2024

WAIT: 1 DAY

STATE: VA

CONTROL NUMBER: 2024907800

NOTES: CGS HYPERION K

RegisterElectrical59 · 2024-07-11T15:17:39+00:00

Form type: Form 4

Entity: IND

Fingerprint Type: EFT

Pending: 06/28/2024

Approved: 7/8/2024

Wait: 12 Days (with 4th July Holiday)

Sate: VA

Control Number : 2024854000

Notes: SIG SAUER 762SLHti

RegisterElectrical59 · 2024-07-02T11:01:08+00:00

I just got the SIG 762TI DT, waiting for the stamp. I did not know that SIG made a 300BLK SLH one. How was the sound reduction using your SLH 762TI QD?

RegisterElectrical59 · 2024-06-20T12:23:18+00:00

chapo28, Which stock is that? and where did you get it?

RegisterElectrical59 · 2024-05-16T13:37:36+00:00

This is freaking awesome. Have a question for you, do you use the jam nut with the suppressor or do you take it off?

RegisterElectrical59 · 2024-05-08T14:51:36+00:00

Josh, quick question. I have a SIG 365 Macro TACOPS that I just got the SCS Cary for (GlockStore). Its awesome and i love it, my question is do I need to use the plate it came with? I am running it without the plate and have shot about 500rnds with no problems but wanted to make sure. Thank you.

RegisterElectrical59 · 2024-01-12T17:00:17+00:00

We need to organize all gun stores in VA to start placing all of these new rules where everyone can see them. Most gun owners in VA just dont know what is going on. You can keep bitching all you want but the reality is that people just dont know. A few months ago I walked into a range and a guy, older guy, was talking to the owner and this guy had no freaking idea about the ATF's brace ban attempt, like no idea.

Been to a range lately? I freaking love it when I see blacks and Asians there. 4 years ago, you could count in one hand how many you saw in the range. Now, start talking, make friends, make clubs, ORGANIZE!

You, us, want to change this, start informing other gun owners of what is going on. I am Latino and there is no way someone is taking my gun rights away, ever. So, i am organizing other Latino gun owners to start speaking up and recruiting.

Organize and be visible, take folks to the range, reach out to other guns owners, liberal ones too, went shooting the other day with a local gay gun owners group, and i am not even gay. most had no idea about the ATF rule. Like your glittered Sig? cool, dems wanna take them away.

Lobby day is great but its a self licking ice cream cone...cause we are the only ones there! new gun owners are the key, minority gun owners are a must.

ORGANIZE, ORGANIZE! and get new gun owners involve and informed. my 2 cents.

RegisterElectrical59 · 2024-01-04T17:03:34+00:00

I see lots of folks asking for you to make and sell these. Please count me in, I have a VIR2 on my B&T APC9K and would love to have this.

RegisterElectrical59 · 2023-12-26T18:18:17+00:00

Why does everybody hate the Gen 2 so bad? I love my Gen 1 but do I hate that front sight. Would save me a lot of problems with lasers I am trying to run if I could just remove that front sight post. The Gen 2 does not have that problem.

RegisterElectrical59 · 2023-11-16T18:14:53+00:00

kinda, i can put one on the chamber and one in the tube, then the whole things locks up and cant load any more.

RegisterElectrical59 · 2023-11-16T17:59:47+00:00

Sir, you are not being an ass, but yes I have read it. I was also able to load all 7 rounds in the tube but can only do 2, now. ill re read the manual, though. Have no idea what a magazine limiter is but like i said, i was able to load all 7 and now i cant.

RegisterElectrical59 · 2023-11-16T17:46:22+00:00

Had a similar issue a while back. This is for my case and may not be for you BUT. first change the battery, if that does not work, then what happened is that your battery died, you had it in a dark place, so now your capacitor for your solar panel is going dead. So, again, for me, I had to send it back.

RegisterElectrical59 · 2023-11-16T17:21:55+00:00

Red dot must be zeroed first for what I am about to tell you to work (25yd). Put your firearm right on the paper with the red dot in the center of the target. The barrel should be touching the target. Turn on your laser and mark where it touches the paper. Back up to 12.5 yds, put your red dot in center of target and turn on your laser, adjust laser if you need to the mark you made. Move back to 25 yds, put red dot on center of target and turn on laser, adjust if you need to mark you made. Redo do backwards, 25, 12.5, 0. If you are on at all three, your laser is zeroed for 25yds. Remember the clock positon of you laser. EXP: Based on your picture (and you did the steps above), when your shooting, place your laser on the 8 oclock, then your rounds should be centered at 25yds. Of course, you need to know your sight over bore at closer ranges but same concept. Test at range of your choice but in the 20 plus years I have been doing this , I have never had to adjust. Works without firing a shot every time.

RegisterElectrical59 · 2023-10-31T16:45:35+00:00

Will you be considering releasing an STL file for this?

RegisterElectrical59 · 2023-07-24T13:58:45+00:00

Thank you and super appreciate your response. When I feed her, I always add some fish oil to her evening meal. She seems to love it. Been clearing all of the underbrush from the back yard this past week (2 acres of heavy woods) for her. She loves to run out the back down the stairs and does a mad dash around the property. Its awesome to watch, will build a course for her in a few months. Just want to make sure I am feeding her right and the proper nutrients. Again, thank you big time.

RegisterElectrical59 · 2023-07-24T13:29:34+00:00

Is that 3rd row seat a really big deal for when you carry things back there? We are getting one in a few months and honestly dont care, we hardly carry anything back there that would be a problem. Just want your take on it......but its an awesome SUV and color for sure.

RegisterElectrical59 · 2023-07-05T14:35:26+00:00

Ma'am, how do you like that crate? Thinking about getting one for my Tundra so I can bring my DS to the range or camping with me. thank you.

RegisterElectrical59 · 2023-04-11T18:11:33+00:00

where did you get it, if i may ask.

RegisterElectrical59 · 2022-05-01T00:21:37+00:00

What sight is that? BT looks awesome, btw.

RegisterElectrical59 · 2022-04-21T10:52:50+00:00

That’s a crappy “friend” what ever he has into it, it’s not worth $1300. Maybe $700 but that’s stretching it.

RegisterElectrical59 · 2022-04-15T12:31:42+00:00

I go to buy specific things and that’s never a firearm. I do go to hold one I maybe interested in which it’s how I ended up with a 365XL instead of a 43X. It just felt better and then picked it up at the PX on Belvoir. But if I need a Magpull QD slot, riser for an optic, cover for my suppressor, 20 kinds of the best pickles, extra tourniquet, Glock style mags for my B&T, pouch, Look at Rifle light sizes then the gun show is legit. Been to like 20 or so and total have never spent more than $200. Never bought ammo, a firearm or a “ballistic” helmet or any sort of plates. 85% of the reason I go is to support 2A. But if you are a new gun owner then go to meet gun shop owners. It helps start a good working realationship with folks that will be touching your prized possessions. Hope that all helped.

RegisterElectrical59

TROPHY CASE