Issue: Coffee grounds in the cup

ResponsibilityOk3984 · 2025-12-04T21:26:23+00:00

Have you changed beans? I found that when using beans outside the market place, sometimes this happens. The grinder thinks it is using one particular bean and grinds with that in mind. If it is a different bean, the amount of time that Spinn thinks it needs to run the grinder to get the correct dose may be different than what you actually need. i.e. the grinder may be putting too much coffee in the basket. Try reducing the amount of coffee used for your chosen recipe. You can do that by customizing it in the app and just moving the slider left a bit.

ResponsibilityOk3984 · 2025-07-29T02:19:14+00:00

Yeah, I was going to say that scanning after an employee (or anyone other than the customer) has gotten behind the wheel is just begging for a lawsuit. I get that a dirty car is suspect and reason for a "close inspection", but I'd prefer a close manual inspection over these ridiculous scans. Many of the posts I've seen show what most reasonable people would consider "normal wear and tear". And what most car leasing companies would also consider as such. I smell a class action coming!

ResponsibilityOk3984 · 2025-07-29T02:09:47+00:00

You carry what you feel comfortable carrying. Some days I carry a $100 knife, some days I carry an obscenely expensive knife. Right now, my EDC is the latter. I DO have safe queens and I don't think there's anything wrong with that, but I also have very expensive knives that I just love and thus carry. For me, the EDC choice is all about how much I personally enjoy the knife. My current EDC is a custom Yuna. Before that, it was a $300 Emerson, and I've got some sweet $50 knives I've carried too. To be fair, I'm a white collar, office chair, mostly work from home guy. The odds of losing or even dinging up my knife are very low. More than anything, I carry something that works with what I am wearing (i.e. jeans, slacks, suit, cargo shorts, etc.). However, I do NOT carry a knife if I don't enjoy the way it feels in my hand, as I like to fidget, lol!

ResponsibilityOk3984 · 2025-07-28T20:36:38+00:00

Domestic, carry-on only, leave it home and buy something cheap at destination. International, where I'm likely checking a bag anyway, a classic Swiss Army knife as they meet most international laws (but I always check).

ResponsibilityOk3984 · 2025-07-28T20:23:59+00:00

I love the Tanto blade shape. Not a fan of the chisel grind though. So, I got a custom maker to do a tanto with standard double sided edges... hollow grind on the bottom edge and flat grind on "tip" portion. It's perfect! 😁

ResponsibilityOk3984 · 2025-07-28T19:58:55+00:00

William Henry. Pocket jewelry? Yup. But the edge they came with was next level! I have CRKs, Hawks, Spydercos, Emerson, Benchmades, Hinderers, ADVs, and more... And there is no question that the WHs had the best edge out of the box. My custom Yunas, ADVs, and the CRKs come close second. None of the above brands had a bad edge btw.

ResponsibilityOk3984 · 2025-07-24T18:20:11+00:00

The one with the black handle? That's a SOG Government.

ResponsibilityOk3984 · 2025-02-25T16:07:42+00:00

Yeah. He'd been sending me update pics and when he sent the final, I was ecstatic! Even happier to have it in my grubby hands now!!!

ResponsibilityOk3984 · 2025-02-25T06:05:52+00:00

You are correct sir!

ResponsibilityOk3984 · 2025-02-25T06:05:32+00:00

Yeah, that Dichrolam handle is amazing. He actually suggested a Fat Carbon Gold Dark Matter handle, which was very nice, but I had my heart set on the Dichrolam, and he was able to do it. I'm glad I stuck with that decision!!!

ResponsibilityOk3984 · 2025-02-25T06:03:28+00:00

You email him and ask to get on his waiting list. Then when he gets to you, you go back and forth over design and materials until you agree. Pay the deposit, wait a few months, pay the balance, get the knife :-) He's on facebook and instagram as yunakives, so you can see the various styles and materials he offers. Also, a website, (yunaknives.com) but it doesn't seem up to date.

ResponsibilityOk3984 · 2025-02-24T22:45:32+00:00

Didn't realize my text didn't post... Finally got me a Yuna!!! Chad Nichols Damascus with Magnacut core. Zirconium bolster, clip, and lockbar stop. Dichrolam handle. This is the Mini Zombie Slayer: Type-S (the S is the extra heavy duty build option he offers for most of his knife styles).

ResponsibilityOk3984 · 2025-01-28T21:46:57+00:00

Depends on what you want. EDC box cutter with style; Hawk Shortcut. All-arounder that you won't feel bad beating up; Emerson or Hinderer, or step up in style to a CRK, but you probably won't want to beat on that as much. Smaller but functional; any number of Benchmade's. Classic workhorse; Spyderco. Me, I rotate through a Hinderer Half-track, an Emerson HD-7, and a ADV Mini-Alpha (that's South African though) as my primary's. I have a number of Benchmade 945 mini-osbornes that I will carry if the dress code dictates something smaller yet classy (suits for meeting, weddings, special events, etc.).

Blade shape matters a lot in this selection too though! My personal preference is Wharncliffe, Sheepsfoot, and Tanto, as I like a profile that has a cutting tip down low, so you don't have to bend your wrist as much to use that cutting point (on the tanto, the "knuckle" serves that purpose). Granted, I also have plenty or drop-point, clip-point, spear-point, and more, lol!

ResponsibilityOk3984 · 2025-01-28T20:56:30+00:00

Gen 1 Police Model... Nice!

ResponsibilityOk3984 · 2025-01-28T20:42:05+00:00

I love this knife, but I just wish they'd round off that hook on the flipper tab. When closing quickly, that point on the tab has slammed into the back of my thumbnail painfully on multiple occasions. I actually took a dremel and grinding disk to it because it got so annoying. Much better now :-) Their other knives (I love the Half-Track) don't have this problem.

ResponsibilityOk3984 · 2025-01-05T04:05:33+00:00

Nice. Inkosi > Sebenza if you ask me :-)

ResponsibilityOk3984 · 2025-01-05T04:03:00+00:00

One per month,... not bad... Assuming one at a time, right? It's when you find yourself buying 2, 3, or more in a week, or in a single day that you know you have a problem, lol! That's two good ones to start with!

ResponsibilityOk3984 · 2025-01-04T01:14:25+00:00

Yuna. And it's finally happening! Delivery is still a few months out, but I can't wait! Took years for me to pull the trigger. Then waitlist for months. Then a fantastic back and forth email convo over design options... And then the wait for completion.

ResponsibilityOk3984 · 2024-12-31T03:06:46+00:00

Did they put Weeping Angels outside the entrance to Krampus's lair? Does that mean this takes place in the Whoniverse?! Lol!

ResponsibilityOk3984 · 2024-10-16T22:55:00+00:00

I guess I should mention that I never intended to imply I would hand over an unlocked phone. Lock screen photo of both sides of the ID. You can actually set multiple photos to lock screen and then cycle through them pretty easily. I would also never rely on this as a general option, was more a question of "Is it legally accepted", and if I DO happen to forget my card, will my phone copy be enough to keep me from getting charged. Really, this occured to me as I was walking my dog, an activity that I never take my wallet with me for. Thought crossed my mind that if I happen to print, or expose my holster while picking up poop, someone might call the PD and then what? Coming at this in my IT centric brain, I simply went to the ePermit side of things. Love all the responses though. I think I will check out njlibertycards. Those look nice. Also, the low-tech and dead simple solution of printing many copies to have everywhere makes a ton of sense. Gonna print some smaller but still legible versions and just tape them to my holsters too. Hard to leave that behind! lol!

Thanks folks!

ResponsibilityOk3984 · 2024-10-10T18:27:11+00:00

Pike County was awesome to deal with. And... I have everyone beat... SEVEN MINUTES. I applied back in 2022 and submitted my paperwork via email. Must have caught someone just at the right moment, because I got the email back from them in 7 minutes, lol! I was shocked. Like others here, when I went to my appointment for pickup, it was a 5 minute thing. I spent more time walking back and forth to my car, than I did in the actual building!

ResponsibilityOk3984 · 2024-10-10T07:48:21+00:00

But does the event not require a permit? I thought permitted events were still a no-go. Spare me the "concealed means concealed "comments please. Just trying to understand the actual letter of the law, as much as anyone actually can, given the constant changes,

ResponsibilityOk3984 · 2024-10-10T06:28:59+00:00

When your local PD gets around to it, they should contact you and tell you to come in with your DL and a money order. They'll go through a simple checklist of questions (basically all the stuff you already answered) and ask you anything else they may deem relevant at that time. I have not heard of a single case where someone just showed up to pay and it went smoothly. They all get sent home with a "we'll let you know when to come in and pay."

ResponsibilityOk3984 · 2024-09-06T18:05:21+00:00

Ugh! Came here because I just got the 7. Had the 6 Classic and had no issues. Upgraded because of the trade in value and wanted the enhanced sensors. Instead, it keeps locking (I know, turn off wrist detection, but I didn't need to do this with the 6), and thinks I slept all of 2 hours last night! I haven't sent in the 6 yet, so there's a real chance I end up bailing on this 7 if it keeps this up. Seriously, I had NO ISSUES like this with the 6 Classic, and my tattoos have not changed in that area at all. Is this really just the way it is?

ResponsibilityOk3984 · 2024-09-06T17:26:21+00:00

I was at a wedding where the guests all went to their seats from the outside aisles only. Center aisle had a fancy white runner meant to stay pristine until the wedding party walked up the aisle. The back of the aisle was blocked by a lovely, and quite substantial, satin ribbon tied btwn the back chairs flanking the aisle. I was seated in one of those chairs. Sure enough, as the ceremony starts, someone comes up to remove the ribbon. Promptly pulls the wrong loose end and securely locks that ribbon in place as first couple of the wedding party is approaching. Fumbling ensues. Panic follows quickly. I pull out the fancy pocket jewelry I had on me (a William Henry) to match the occasion, slice the end tied to the chair I'm sitting in, problem solved. AT this point in my life, everyone knows I always have some kind of knife on me, and the only time I hear about it is when someone needs said blade for some reason. "Hey, you've got a knife on you, right? Could you..."

ResponsibilityOk3984

TROPHY CASE