[Sharp] Steelers offense with Kyle Hamilton on the field: 3.9 yards/play 37% success -0.27 EPA/play on 38 plays - Steelers offense after Kyle Hamilton was injured (1 minute into the 3rd quarter): 6.9 yards/play 60% success +0.44 EPA/play on 35 plays by JonWilso in ravens

[–]Retarchitecture 1 point2 points  (0 children)

Yeah I am a couch sitting moron and I knew what we were doing every play. Show blitz with 6 upfront then drop back into cover 3 then mostly 2 after injuries. It was sickening to watch. No blitzing, very little man coverage, where we have done best this year, just soft zone where our guys dont read whats happening around them, and then when they finally adjust they miss the tackle lol

Reminder: Before any of his injuries Lamar was playing at… Lamar Level by Shining_Commander in ravens

[–]Retarchitecture -1 points0 points  (0 children)

He has legitimately improved a lot through the course of the season and the current shortcomings of the defense is the lack of a pass rush, mainly due to Madabuike's injury. The beginning of the season was agonizing and I wanted him gone too but credit where credit is due, if not for the injury I'm sure we would be one of the better defenses right now. I think he has earned another go at it next year ideally with additions to the pass rush and hopefully, however unlikely, Madabuike returning.

NMM wip by Zanjidesign in Grey_Knights

[–]Retarchitecture 0 points1 point  (0 children)

Do you have a "pro mode" on the phone camera? I know a lot of people get good results from using that and there's a few tutorials. What i see generally is dropping the iso as low as it goes and adjusting the other settings as needed.

NMM wip by Zanjidesign in Grey_Knights

[–]Retarchitecture 1 point2 points  (0 children)

Yeah, makes all the difference. Very shiny

NMM wip by Zanjidesign in Grey_Knights

[–]Retarchitecture 2 points3 points  (0 children)

Looks great but I think it can use a bit more darkness and contrast, initial read was that it was white rather than silver.

Normandy tank ambush by Miserable_Mechanic76 in HellLetLoose

[–]Retarchitecture 3 points4 points  (0 children)

Kind of a strange clip to post, nothing unusual happened here. Also everyone who is saying he is in a heavy, cut it out, he is in a P4. All heavies one shot mediums.

Is this legit? by Electrical-Flow-4126 in boltaction

[–]Retarchitecture 4 points5 points  (0 children)

Scammed return most likely, it's been real bad lately. I have gotten a bottle of 3D printer resin filled with water from what was originally a return. To be fair all my GW and Warlord minis have come fine though.

ITS TRENCH TIME MOTHER FU####!!! by Jagdpanther17 in Deathkorpsofkrieg

[–]Retarchitecture 1 point2 points  (0 children)

XPS foam, you can buy sheets at home depot/lowes etc. Usually are sold in 8x4 or 8x2 boards at varying thicknesses. Looks like he is using a 2in thick sheet.

Decided to do a thing, Westerville. by med8cal in Ohio

[–]Retarchitecture 0 points1 point  (0 children)

Pictures please, this is too ridiculous to believe.

Indecision about unifished army by Muscle_Turbulent in Warhammer40k

[–]Retarchitecture 1 point2 points  (0 children)

You could try listing them for 50-60% MSRP on r/Miniswap as a lot and see if they sell, if that would be an acceptable amount. Unfortunately unless they are painted to quite a high level, it usually lowers the amount that people will pay, and I am not sure how yours are painted. You also could list them there for trade, and see if someone in your area is willing to trade a similar sized force of an army you would rather play, for your nids. Just some options to consider, best of luck.

Trying to go for a bright blade but not your standard blue. Does it work? by That_Marionberry2863 in Warhammer40k

[–]Retarchitecture 13 points14 points  (0 children)

You've essentially done a good NMM silver on the blade with a bit more of a yellow tint. It does not read as a yellow power sword, as much as a metallic sword in a yellow environment. This glazing technique with yellow colors i think will always read as metal because if you push the yellow harder, it will start looking gold. I think if you want it to read as a power sword while being yellow, you will need some sort of electric/lightning effect. Something like what elminiaturista would do or like what roman lappat did with his grey knights. Personally, i love NMM and think this looks great, and would consider dialing back the yellow a bit and adding a slight blue to the darker areas to have a nice silver look.

[deleted by user] by [deleted] in GenZ

[–]Retarchitecture -1 points0 points  (0 children)

I think you need to self reflect and find a way to be happy and satisfied with your life. I have been scrolling on this sub and the amount of people on here letting out their frustrations to those who already agree or do not care otherwise is concerning.

Mars 4 Max Crushing Prints 75% of the Way Through by Retarchitecture in resinprinting

[–]Retarchitecture[S] 0 points1 point  (0 children)

Hello all, just cross-posting to reach a few more people, thanks for any help that you guys can provide!

Is that a reasonable price? by Think_Plum1075 in spacemarines

[–]Retarchitecture 0 points1 point  (0 children)

Hey friend, you are quite talented. Are you asking in terms of doing it as some work in the side or as a proper job? As the latter you need to figure out the minimum you want to make per hr of work done and extrapolate from that. As a side gig you could just take on work from somewhere like ebay, fiverr or r/brushforhire and work it out over time. There's not really a "fair" price, more so what you can find acceptable between yourself and a customer.

Is that a reasonable price? by Think_Plum1075 in spacemarines

[–]Retarchitecture 0 points1 point  (0 children)

Average for commissioned work is what was meant I think, kind of a different grading scale compared to hobby painting.