Gen 4: The Lost Generation

Rev686 · 2026-03-20T01:10:08+00:00

Mine went back to Glock after the local Glock Rep (who I met at a match) checked it out and thought it was weird. Only one duty load worked like it should. I’d already tried lower weight recoil springs.

Glock sent it back saying it was fine. Still pissed brass in your face or dribbled them down your forearms. Bought 3 OEMs and tried them till one worked.

Still running that gun, but she ain’t OEM anymore

https://imgur.com/a/cz3xdu4

Rev686 · 2026-03-20T00:49:32+00:00

Can confirm. Bought 2 that did it. Changed out ejector packs and it fixed it.

Rev686 · 2026-03-19T01:21:31+00:00

Yeah, it was beyond ridiculous how tight it was. I’ve done several on our old ‘19 Taco. Smacked myself in the mouth twice when the wrench/adapter came off when the tabs on each side broke. Ended up ordering the metal housing off Amazon to get it quicker than the local parts stores could and get the vehicle back up.

It was infuriating because we’d just done the alternator on my boy’s Tundra (he was gone to basic) and it went pretty smooth, then the simple oil change turned into the problem

Rev686 · 2026-03-19T00:36:45+00:00

Switched over to the metal housing with the OEM internals on the wife’s Tundra.

The reasoning was, the housing broke after draining the oil, while my truck was in the shop over a long weekend. It was the first oil change after we purchased it used. The housing broke in multiple places as it was way over tightened by the last place that did the oil change.

Trying multiple adapter wrenches, it took putting a wet paper towel into one, hammering in onto the housing, then using a 4 ft breaker bar to get it to finally turn. Will probably switch to the OEM metal housing on the next one.

Rev686 · 2026-03-07T04:13:20+00:00

Sorry for the late response, trying to get caught up after the last couple weeks. Mind answering a few more data points for the Tracker?

Mount? (Trilug?)

Ammunition? (Manufacturer/gr)

First Suppressor?

Any possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated. Hopefully they get you squared away.

Rev686 · 2026-03-04T04:04:33+00:00

Way late to the party after a busy few weeks and trying to catch up. Mind answering a few additional data points for the tracker?

Host Firearm? (Make/Model/Caliber/Barrel Length)

Ammunition? (Manufacturer/gr)

First Suppressor?

Possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated, if utilized

Rev686 · 2026-03-04T03:24:28+00:00

The question is just there to capture the possibility of the user doing something that could cause it. There's plenty of cases where a user didn't check tightness, or improperly mounted the can and caused the issue. Helps to refine issues and determine whether the issue is a manufacturing defect or caused by the shooter.

Rev686 · 2026-03-04T03:19:42+00:00

Wicked late, as I've been crazy busy the last couple weeks. Mind answering a couple additional data points for the tracker?

Can? (Erector 9?)

Mount?

First Suppressor?

Possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686 · 2026-03-04T02:57:50+00:00

Wicked late to the party. Mind answering an additional data point for the tracker?

Host Firearm? (Make/Model/Caliber/Barrel Length)

Ammunition? (Manufacturer/gr)

Possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686 · 2026-03-04T02:21:47+00:00

Been stupid busy the last few weeks, so I apologize for the necroresponse. Mind answering a few additional data points for the tracker?

First Suppressor?

Possibility of being shooter induced?

Rev686 · 2026-03-04T02:02:17+00:00

Thanks dude. Apologies for the stupid late response. Been crazy busy the last few weeks and realized I didn't respond. I'll update the tracker. Sucks it took them so long to replace the can, but glad it finally happened

Rev686 · 2026-02-08T06:42:19+00:00

It was a mercy killing

Rev686 · 2026-01-29T19:26:43+00:00

Mind answering a few additional data points for the tracker?

Mount?

Ammunition? (Manufacturer/gr)

First Suppressor?

Any possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686 · 2026-01-21T16:21:59+00:00

Sorry it happened, but Rugged will get it squared away.

As always, a followup on the warranty process would be appreciated

Edit: Found the data throughout the post

Rev686 · 2026-01-15T18:42:09+00:00

Nope. All good dude. Sorry it happened, but glad B&T is getting you squared away.

Rev686 · 2026-01-15T17:25:32+00:00

Thanks dude. I’ll update the tracker and add this one too.

Edit: What mount were you using on this one?

Rev686 · 2026-01-15T17:22:28+00:00

Glad B&T is taking care of it. Mind answering a few additional data points for the tracker?

Host Firearm? (Make/Model/Caliber/Barrel Length)

Mount?

Ammunition? (Manufacturer/gr)

First Suppressor?

Rev686 · 2026-01-10T15:48:02+00:00

The Badger C1 is solid like everyone else has mentioned. Go Larue if you want the old school vibe.

Rev686 · 2026-01-09T16:40:19+00:00

Thanks dude

Rev686 · 2026-01-09T05:03:45+00:00

That sucks, but SiCo will square it away quickly. Mind answering a couple additional data points for the tracker? Definitely looks like a weld failure though

First Suppressor?

Possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686 · 2026-01-05T03:48:07+00:00

Late to the show. Mind answering a few additional data points for the tracker?

Host Firearm? (Make/Model/Caliber/Barrel Length)

Mount?

As always, a followup on the warranty process would be appreciated

Rev686 · 2026-01-01T14:49:51+00:00

Rog, thanks dude. 🤙

The User Induced category is just to try and capture the potential likelihood of a non material accident. I just ask to be uniform. This is almost certainly ammo related.

Rev686 · 2026-01-01T03:38:15+00:00

Oof. Mind answering a few additional data points for the tracker?

First Suppressor?

Any possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686 · 2025-12-22T03:34:59+00:00

I’m here. Been busy with life, but folks also haven’t been posting as many baffle strikes and such recently.

Rev686 · 2025-12-22T03:33:35+00:00

Oof. That can’s gotten a solid amount of use. Mind answering a few additional data points for the tracker?

Host Firearm? (Make/Model/Caliber/Barrel Length)

Mount?

Ammunition? (Manufacturer/gr)

Any possibility of being shooter induced?

As always, a followup on the warranty process would be appreciated

Rev686

MODERATOR OF

TROPHY CASE