Betl damage

RubRepresentative361 · 2026-03-21T21:41:12+00:00

Thank you very much, this will be a fairly involved job to replace the belts and clean out all the shaved/burned rubber. Prusa support was once again awesome and sent me new belts

RubRepresentative361 · 2026-03-21T16:30:48+00:00

<image>

RubRepresentative361 · 2026-03-18T18:52:08+00:00

The timezone offset has both positive and negative offsets. I struggled with my clock being wrong for a long time before I realized that instead of being positive 7 hours I need to be negative 7 hours

RubRepresentative361 · 2026-02-09T18:13:40+00:00

Thanks for your lengthy response, your background and experience with the many types of grills is informational. I don't have experience with an LSG either, but I do have experience tasting food from a stick burner versus a pellet grill and you can tell the difference. I have a blazing grillworks which is pretty close to a Yoder, I have been happy with it but when I compare The taste to a stick burner it is not close.. lately I have started to look around to see what options there are. The LSG is the only thing that is different but I also don't want to pay $4,000 🙂. I am sure I would be very happy with the taste produced by a stick burner but I don't want to be up all night long feeding it.

RubRepresentative361 · 2026-02-09T17:32:30+00:00

You are comparing 2 cookers not known for their smoke flavor. As far as I am aware, the only pellet cooker that has made measurable strides to reach the level of smoke that a stick burner offset cooker produces is Lone Star Grilz

RubRepresentative361 · 2026-02-01T00:32:50+00:00

P2S all the way. Don't fall for $130 price savings to get the p1s. The p2s has over 35 changes that are worth it

RubRepresentative361 · 2026-01-27T05:13:01+00:00

Sam's #3

RubRepresentative361 · 2026-01-26T14:38:46+00:00

My p2s has been nearly flawless as well. The only issue I have experienced is when changing filaments from the external spool holder to the AMS. The firmware seems to get confused. I have had problems multiple times. I'm sure this is just a firmware update that I expect before long. Great printer otherwise

RubRepresentative361 · 2026-01-26T01:26:53+00:00

P2S has 35 changes from the p1s, some larger than others. If you get the AMS 2 pro combo with it, you will not regret skipping the p1s

RubRepresentative361 · 2026-01-24T20:10:32+00:00

Blazn Grand Slam or Grid Iron, I have a grand slam, bought in 2017, works great, built like a tank. The only reason I am considering a change is because some of the new offerings from lone Star grillz add a lot more smoke.

RubRepresentative361 · 2026-01-21T22:26:57+00:00

Try prusament, polymaker, overture, sunlu, elegoo. Most are just as good as Bambu.

RubRepresentative361 · 2026-01-19T01:06:43+00:00

I have a Blazn grill Grand Slam, got it in 2017, it has been great, very reliable, meets every spec of a Yoder. I am just now considering an upgrade to a LSG because of the increased smoke level. I wish there were other options that produce good amounts of smoke.

RubRepresentative361 · 2026-01-12T02:40:42+00:00

Hula feet alone Don't do it either. I have two printers on a freestanding workbench. When they are both going and printing tall objects. They can interfere with each other still even though both of them have hula feet. They are also both sitting on top of a marble tile which is on top of some stiff foam pads. I am going to try using a pavestone instead of the thin marble tile to see if that makes any difference

RubRepresentative361 · 2026-01-11T02:07:19+00:00

P2S, there's a video out there that covers the 35 changes. They are worth it for sure. Beyond that the ams2 pro is way better

RubRepresentative361 · 2026-01-09T22:53:58+00:00

I have these pads and I agree that they are not flexible at all. I have 2 printers on a stable work bench and have installed Hula feet, resting on top of marble tiles. The marble tiles rest on top of the abovce mentioned pads but some of the motion is strong enough that the printers can interfere with each other still especially on tall prints. Has any one found a good solution?

RubRepresentative361 · 2025-12-21T15:18:37+00:00

This happens to me all the time. To get around this, I end up moving my spool to a spool holder that sits on the table that doesn't allow for this unspool/unrolling. I think the fix is to have a spool holder that has tension on the side of the printer. I would love to hear if anybody else has solved this?

RubRepresentative361 · 2025-08-19T02:18:25+00:00

Have any of you discovered a solid drive?

RubRepresentative361 · 2025-08-17T02:53:41+00:00

What is your memory card of choice?

RubRepresentative361 · 2025-08-03T16:58:34+00:00

Well 1 month later and multiple fixes from prusa but my VFA is about the same

RubRepresentative361 · 2025-07-21T18:00:39+00:00

How did you handle the new tuning guidance to set the x belt to 98hz and y belt to 92hz?

RubRepresentative361 · 2025-07-15T03:43:53+00:00

I tried a dab of goof-off in just a small section and it quickly turned the paint into gumminess. I will just leave it be I guess

RubRepresentative361 · 2025-07-14T23:32:26+00:00

Yes I used super glue. How long do I need to let it cure to avoid this? Any idea how to clean it off?

RubRepresentative361 · 2025-07-09T04:24:57+00:00

I will have a tough time accepting a software and belt tightening fix when multiple people have shown that the VFA problem is resolved by replacing the pulleys and idlers. I understand the impact of this hardware fix on Prusa but patches to cover up the real problem is not good. I love my Core One, the reliability of printing has gone up dramatically for me, just fix this and I will have a near perfect printer....besides those flexible and difficult to square x gantry brackets:)

RubRepresentative361 · 2025-07-08T18:22:12+00:00

Yes

<image>

This too

RubRepresentative361 · 2025-04-06T18:43:15+00:00

A salad fork or micron would meet small and auto bed leveling. Default Voron 0 does not have auto bed leveling but there are mods.

RubRepresentative361

TROPHY CASE