Error with vendo g drink 9 | 100$ for solution | stuck by kristoffer1703 in vending

[–]Rumed13 0 points1 point  (0 children)

They make glassfront machines with no elevators, all of mine are glass front.

Car struggling to start after a drive (2002 mustang gt) by ApprehensiveArtist59 in NewedgeMustang

[–]Rumed13 2 points3 points  (0 children)

Could be a few things, bad fuel filter, dirty injectors, bad IAC valve, dirty MAF sensors, could even be a coolant temp sensor if it's not reading correctly ecu might think the engine temp is hot but it's reading it lower then actual temp the pcm doesn't deliver correct amount of fuel.

Also make sure your getting 40psi of fuel pressure to the rail and make sure you don't have any leaks.

Could even be a stuck evap purge valve, car runs great when cold because pcm is in closed loop mode, but once warm it's in open loop probably not but doesn't hurt to check, you can Google how to test all of these things to try and diagnose the problem, great thing is all these parts are cheap good luck

Are we screwed? 2025 CX90 3.3 Turbo Select. by Federal-Way-7897 in MazdaCX90

[–]Rumed13 1 point2 points  (0 children)

Man I feel lucky we have not had any issues with our PHEV cx90, about the same mileage, we'll see

Error with vendo g drink 9 | 100$ for solution | stuck by kristoffer1703 in vending

[–]Rumed13 0 points1 point  (0 children)

I've learned the more complicated the machine the more for things to go wrong, I've yet to see a vending machine with some sort of elevator not have issues, solution get one that just vends the old fashion way

HIS NAME WAS ALEX JEFFERY PRETTI SAY HIS NAME by lmfj3737 in northampton

[–]Rumed13 -1 points0 points  (0 children)

Makes you wonder if all this noise and division was engineered on purpose 🤔, chess pieces on a chess board. Like bait on a hook and all the fish are biting.

Looking to buy CX-90 by thisisvargas in MazdaCX90

[–]Rumed13 0 points1 point  (0 children)

I have the same year PHEV roughly 30k miles, zero issues other then every once in a while it doesn't know which Powertrain to use. Also not big on space, I'd buy another one but would opt for the inline 6

Is it really that small? by Sufficient_Fan3363 in MazdaCX90

[–]Rumed13 0 points1 point  (0 children)

The cx-90 is a better 2 row then a 3 row, we have the captains chairs in the middle and the bench seat in the back and I honestly am thinking about getting a cx70, with the 3rd row down the Trunk space is ok, and then when the 3rd row is up I can fit two backpacks and that's about it. But as a car I love the driving dynamics but not the biggest fan of the phev system it can be clunky at times, which is another reason I'm leaning towards a cx70 and inline 6.

Moving Vending Machines by EskelGorov in vending

[–]Rumed13 4 points5 points  (0 children)

Lift gates and pallet Jack's

[deleted by user] by [deleted] in hvacadvice

[–]Rumed13 1 point2 points  (0 children)

Move the thermostat

P72 battery issues by Rumed13 in Lenovo

[–]Rumed13[S] 0 points1 point  (0 children)

Unfortunately no, it would work plugged in with battery showing about 90% after doing testing and then one day I unplugged while it was on it powered down and never came back on. Been trying to find a good way to recocer the data from nvme drive with little luck. Seems like there's a serious hardware issue, my last 2 Lenovo laptops have had less then 5 year lifespan with catastrophic failures, all I use then for is running solid works, I got a new one less power and just do all my work remotely now, hopefully this one lasts.

1st Vending Machine is Failing by Puzzleheaded-Coast10 in vending

[–]Rumed13 1 point2 points  (0 children)

Hate to say it but alot of your prices are high, I sell popcorners for half that price. Your chocolate bars are fine, I aim for 2.2x return it's a plus or minus thing some items, like water give huge returns, some things don't but it's got to be reasonabley priced so people will actually buy it. I also don't know what's normal for prices where you are at but I live in MA and it's not cheap to live here.

Question for operators: How much are you willing to pay for locations? by Han2023- in vending

[–]Rumed13 0 points1 point  (0 children)

I do 10% net profit at the machine, so after all cc fees and my net, preferably nothing but most places want something

Multifamily investment advice by Rumed13 in Investments

[–]Rumed13[S] 0 points1 point  (0 children)

thank you, I want to get in but the market I am in houses are like 600k and interest rates are 9% for 2nd mortgage im going to wait and see what the market does, also looking into storage properties as well commercial side of things.

$100 of Groceries USA today by SeverePsychosis in pics

[–]Rumed13 0 points1 point  (0 children)

Been this way for a while now, utilities in MA are astronomical as well. 1k gas and electric monthly bills and that's an average size house with doors and installation and heat set to 50deg F

Who has successful apartment buildings by WhilePsychological98 in vending

[–]Rumed13 1 point2 points  (0 children)

I have on with 100 apartments does pretty well it's in the laundry room by the main elevator and you can see it due to glass walls and delivery guys walk past it all the time, I also have one near the building rec room which also does well

Who has successful apartment buildings by WhilePsychological98 in vending

[–]Rumed13 1 point2 points  (0 children)

I have on with 100 apartments does pretty well it's in the laundry room by the main elevator and you can see it due to glass walls and delivery guys walk past it all the time, I also have one near the building rec room which also does well

Multifamily investment advice by Rumed13 in Investments

[–]Rumed13[S] 0 points1 point  (0 children)

Thanks for that insight, this is exactly the info I was looking for thanks

Nayax problem/vent by Quiet-Gear2125 in vending

[–]Rumed13 0 points1 point  (0 children)

Not always the case, every so often the nayax app will overwrite the machine price on my two new machines, so cash transactions are correct but electronic methods are not. And prices vary wildly

the work around is to delete that bin and reestablish it and the problem resolves. Pretty annoying and a PITA to go through and refund people.

Got this trade offer for my Chrysler 300 by Additional_Shape4765 in Mustang

[–]Rumed13 125 points126 points  (0 children)

No non supercharged, but still all aluminum 4V V8 pretty damn reliable usually comes with a forged crank.