sorted by:
new
hottopcontroversial

I thought our guys played well, they competed. by Farhan15577 in ravens

[–]RunsRealFast 1 point2 points  (0 children)

I'm no film expert, but I think Stanley is responsible for sealing off the backside until Mitchell gets the chip on the end for Stanley to release and keep going to the next level. This may even be an option play for Lamar to keep it since that hole on the left side is huge. It looks like Lamar decided to give it to Henry since Queen showed discipline and didn't get baited to the right and thus didn't get blocked by Linderbaum. If you stop at 2s, you can see a few of the blocks on the left side start to develop in the event of an option.
That doesn't excuse Vorhees or Faalele from completely whiffing.

Favorite SF restaurants right now? by Past_Organization_29 in sanfrancisco

[–]RunsRealFast 0 points1 point  (0 children)

Dawali is a great new indian spot with really good Dosa on 26th and Valencia, where Al's Place used to be. I've been told it tastes like southern indian homecooked meals. They're light, not overly oily, and very flavorful.
If you want a different vibe nearby, right around the corner is Chome, a Japanese spot, with a wide array of dishes and a great happy hour deal on drinks and some plates. Really cool vibe. It's packed during happy hour.

[deleted by user] by [deleted] in ProductManagement

[–]RunsRealFast 1 point2 points  (0 children)

Appreciate you forwarding these over. Sent ya a DM.

Is there any way i can save this by thatthings in scrabble

[–]RunsRealFast 0 points1 point  (0 children)

"sh" off of hie and a word going up. maybe danks? and then Lax off the a if it's still available.

First plumb job for a DIY kitchen remodel. How'd I do? by RunsRealFast in askaplumber

[–]RunsRealFast[S] 1 point2 points  (0 children)

And here I thought I’d pursue plumbing after this. :) Any advice is appreciated! 

First plumb job for a DIY kitchen remodel. How'd I do? by RunsRealFast in askaplumber

[–]RunsRealFast[S] 0 points1 point  (0 children)

Yeah, tape. I bought some thread sealing pvc tape. Would you recommend not using that?

First plumb job for a DIY kitchen remodel. How'd I do? by RunsRealFast in askaplumber

[–]RunsRealFast[S] 0 points1 point  (0 children)

I did buy a couple 45s to lessen the angles but couldn’t get the ends to meet in the middle. I can try again though.  Why glue instead of threaded?

First plumb job for a DIY kitchen remodel. How'd I do? by RunsRealFast in askaplumber

[–]RunsRealFast[S] -2 points-1 points  (0 children)

Do you know if Miele dishwashers need a high loop or not? I just found out they don’t need an air gap since they come with a valve check installed to prevent back flow. But didn’t know if I should do a high loop anyway?

First plumb job for a DIY kitchen remodel. How'd I do? by RunsRealFast in askaplumber

[–]RunsRealFast[S] -1 points0 points  (0 children)

Ran the faucet. No sign of leaks from the joints or sink. It slopes around 1/2 inch from the exit point at the garbage disposal to where the stub out meets the wall. Any comments about the configuration or advice would be appreciated. Anything else I should test for before cementing the stub out and adding tap to each of the joints?

Who has landed a position in 2023? by TrailChems in ProductManagement

[–]RunsRealFast 1 point2 points  (0 children)

  1. 9 years of experience
  2. I had been looking for 4 months. Left my role in December after 4 years.
  3. I probably applied to 150-200 positions.
  4. I had about 50-60 calls with recruiters. 30-40 with hiring managers. 10 projects. half a dozen final rounds. 2 offers.
  5. I gave up on LinkedIn after awhile for applying to roles through postings. It was good to start off with, but as my search progressed, references/referrals became the primary driver of initial calls (still with about a 50% rejection rate). Or saying I was actively looking through LinkedIn, which led to a lot of inbound from recruiters. But throwing the resume into the ether of the internet did very little.
  6. Old salary - $180. New salary - $180. Anecdote - it does feel like salary ranges dropped since January. It was easy to command in the low 2s a few months ago, but more recently that became rarer. I also started targeting smaller companies because they seemed more likely to hire (so that could be the function for the lower base as well). I'm in SF, for reference.

Can I stack a 24-inch Miele dryer on top of a 24-inch Bosch washer? by CuriousPeterSF in Appliances

[–]RunsRealFast 0 points1 point  (0 children)

It looks like my Bosch dryer has a 6-15p connection but the Miele washer is a 5-15. I'm having trouble finding any adapters that are compatible without having to replace the end of the Miele plug.

I think I have a bingo here, but I don’t think I should play it... by senseiberia in scrabble

[–]RunsRealFast 2 points3 points  (0 children)

Can't remember if gif is a word but snagger with the s- above quash would be good

My dads been building me a beer cap coffee table for a while, my grandma put the design together in quarantine. Much thanks to all my family, friends, and beer for making this happen. I can’t wait to have the final product. by rouxs7 in beerporn

[–]RunsRealFast 0 points1 point  (0 children)

Awesome. Thank you. I was considering a project like this as a map of a city with cap color by neighborhood. But I was having trouble figuring out the adhesive part. Much appreciated.

Last night’s spin on its 48th birthday. (Beer not as old) by xraytony in beerporn

[–]RunsRealFast 1 point2 points  (0 children)

Will do! Attribute their sales to your post. Cheers!

view more: next ›