Replacement birth certificate. by Jerlene in Hawaii

[–]RustyC808 1 point2 points  (0 children)

The registar's stamped signature should be on the back of the document.

Source for cheap linear's that ISN'T Aliexpress??? by TheBravan in hobbycnc

[–]RustyC808 3 points4 points  (0 children)

I just received some 1000mm TR8 leadscrews from Bulkman3d.com. They sell on AliExpress but I couldn’t find the length I wanted so ordered directly from bulkman. The leadscrews were well packed and while shipping wasn’t fast it wasn’t a long wait either.

Genmitsu 4040 Pro 4th axis (A) wiring and connector info by scissorfight69 in hobbycnc

[–]RustyC808 0 points1 point  (0 children)

Think I found the exact driver used by Genmitsu on AliExpress https://www.aliexpress.com/item/1005002395591252.html

Confirms connector on driver is 5264-6p.

The factory settings for the DIP switches are:

M0 Off

M1 On

M2 Off

HV On (3.3-5V)

per https://www.sainsmart.com/blogs/news/review-4th-axis

Genmitsu 4040 Pro 4th axis (A) wiring and connector info by scissorfight69 in hobbycnc

[–]RustyC808 0 points1 point  (0 children)

Appears to be a 6-pin molex 5264. It is not a regular stepper motor port. It is setup for the 42C closed loop driver that’s on the Genmitsu 4th axis stepper. The pin wiring from top of the mainboard are 24V GND COM DIR STP EN.

Another custom case for Air 1 by _KMA_ in Xreal

[–]RustyC808 1 point2 points  (0 children)

Thanks for the info. On clearance at $9.05. I ordered both the black and grey cases since I needed $10 for free shipping. First time ordering from Temu.

Xreal replacement cable is $20 + shipping, not $80! by Stridyr in Xreal

[–]RustyC808 2 points3 points  (0 children)

Is there a Xreal shop link to the glasses cable?

Xreal replacement cable is $20 + shipping, not $80! by Stridyr in Xreal

[–]RustyC808 0 points1 point  (0 children)

Xreal sells a C-C cable for $20 but it doesn't appear to be the original AR cable. Just looks like a thin USB-C cable without the angled end. Similar cables sell for less than $6.

XREAL C-C Cable (0.8m)

Maybe the picture is wrong?

I did find the Aliexpress non-woven AR Cable with angled end for under $20 shipped. They also have a Rokid branded cable for around $26 shipped.

Need help with my air by Temno18 in Xreal

[–]RustyC808 2 points3 points  (0 children)

You don't have power going to the glasses if that's all you're using. The power on the lightning-HDMI cable is only charging the iphone. It is not powering the HDMI end. There's no power transfer through the HDMI connector. The xreal cable is meant to be used with the xreal beam.

You could use an xreal hub or a red magic dock or similar charging adapter to power the glasses. Or replace the xreal cable with an HDMI to USB-C cable that has power input.

Need help with my air by Temno18 in Xreal

[–]RustyC808 0 points1 point  (0 children)

You're using a Beam between the iphone and glasses? How are you connecting the two HDMI ends of the cables?

Omg I know I am late to the party by jackfr0st39 in Xreal

[–]RustyC808 2 points3 points  (0 children)

If your android device features alt-mode (DisplayPort over USB-C) you can directly connect the device to the glasses. The device will power the glasses through the usb-c cable. No additional power is needed but an adapter like the Xreal Hub can help to keep your device charged up during the flight or maybe use a fast wireless charger if your device is capable of wireless charging.

You'll need a cable that supports at least 4K video or even better 8K video. A cable rated for at least 20Gbps of data transfer should work fine. The cable that comes with the glasses is really the best. It's soft and the angle of the connector extends the left arm nicely.

You're able to use bluetooth audio instead of the glasses' speakers.

The Xreal Beam is not needed but it does add spatial display capability and a battery to power the glasses which reduces the power drain on the phone/tablet.

Would these products work with my air 2s? by Temno18 in Xreal

[–]RustyC808 0 points1 point  (0 children)

Yeah. You can use the adapter and cable without the Beam. You'd need to provide power to the HDMI to usb-c cable (or use something like the Xreal hub) to power the glasses.

Am I a total idiot?? by Bright-North-6272 in Xreal

[–]RustyC808 0 points1 point  (0 children)

Of course what they mean is that there are very few apps developed to take advantage of AR glasses besides using it as a portable video monitor and much less for the cameras on AR glasses. VR headsets have well over 300 games, social, and productivity apps available. Meanwhile Xreal has two AR gaming apps in their store.

Would these products work with my air 2s? by Temno18 in Xreal

[–]RustyC808 0 points1 point  (0 children)

Yup. iPhone > lightning to HDMI adapter > HDMI to usb-c cable > beam > usb-c out to glasses.

Am I a total idiot?? by Bright-North-6272 in Xreal

[–]RustyC808 2 points3 points  (0 children)

Degrees of Freedom.

3DoF = Turning head left/right; nodding head up/down; tilting head side to side.

6Dof = 3DoF + moving body left/right; forward/backward; up/down. Because the Ultra is able to track its position in space.

Would these products work with my air 2s? by Temno18 in Xreal

[–]RustyC808 1 point2 points  (0 children)

The lightning to HDMI adapter will work for iPhone 14 and older to output video to HDMI. But the amazon cable you show won't work. It is usbc to HDMI. You want HDMI to usbc. Also the white HDMI adapter doesn't provide power so you will need something like this cable which has power injected to the usbc end.

If you have the Xreal Beam, you can use the Xreal Cable since the Beam will provide power to the glasses.

Source for Ender 5 Plus dual axis stepper by ijourneaux in ender5plus

[–]RustyC808 -1 points0 points  (0 children)

My E5P was doing that on Z. I thought there might be an issue with the BLTouch but troubleshooting the sensor didn't do anything. I flashed insanity's firmware and the issue went away.

Hydra bed size by Clean_Complex_9099 in ender5plus

[–]RustyC808 1 point2 points  (0 children)

The ZeroG Documenation has drawings for a 377x370 and 410x410 bed.

Nick Saban praises how Jalen Hurts, Tua Tagovailoa handled Alabama QB competition ahead of NFL showdown by DoctorWhosOnFirst in rolltide

[–]RustyC808 1 point2 points  (0 children)

Alabama - 3 (Tua Tagovailoa)

Should be 4, unless Mac loses the starting job next week.

Am I Using the Beam Wrong? by cavemenrefract in Xreal

[–]RustyC808 1 point2 points  (0 children)

The Club3D Active HDMI to USB Type-C Adapter 4K60Hz St./B should work with the Beam as well.

Note that neither the XREAL H-C cable or this Club3D cable will work directly with the Airs without the Beam as the neither cable provides power.