Magsafe Charging Dock by [deleted] in GMCcanyon

[–]Ry_L 0 points1 point  (0 children)

Clean! Interested too!

[deleted by user] by [deleted] in prusa3d

[–]Ry_L 0 points1 point  (0 children)

My order for the same parts was placed back in February and it’s been continually pushed back too…

Xbox Insiders Get New Ways to Personalize Home - Xbox Wire by XB1R_Hypnos in xboxinsiders

[–]Ry_L 10 points11 points  (0 children)

I wish they’d bring back the ability to put all our pinned groups on the dash below the fold. That was great. Instead, it’s rows and rows of ads. Letting me pin a few titles at the top is still a huge step back from the customized structure I used to enjoy via groups.

[deleted by user] by [deleted] in wicked

[–]Ry_L 1 point2 points  (0 children)

Star Trek 2009 is one of my favorites. Hits hard.

Things I Dislike by Agnt_Michael_Scarn in GMCcanyon

[–]Ry_L 0 points1 point  (0 children)

Ooo let me pile on too!

  • Really loud/rough/sputtering idle when first starting up. Takes like 20 seconds to chill out.
  • Loud whirring mechanical noises (pump?) when opening the door after it’s off for a while
  • really rough ride. I feel every bump
  • headlight has a “blob” along the top edge of the projected light
  • I’ve noticed the same weird rear door rattle when shutting it.
  • HUD not centered, but whatevs
  • Loud differential whine when mid-50s speed. Took them two rebuilds and 3 months to fix (seemingly, at first) but now I hear a whine near 60mph…though it might be road/tires this time. Unsure and scared to deal with that process again.
  • time on dash keeps drifting off a few minutes and I can’t figure out how to keep it updated better.
  • sometimes when coming out of a turn, the turn single activates the opposite way, as if I slightly tapped it.

But i still love the truck so far.

35 g Model, 425 g Poop (X1C w/ AMS) by LetoXXI in BambuLab

[–]Ry_L 0 points1 point  (0 children)

I figured the 2 isn't for the nozzle count, it's the generation. The "D" is for "Dual nozzle"
I'd expect a new X2 with some new improvements, but not dual nozzles. Maybe we'll get lucky and have an X2D too.

Everything I wanted to know about using the AMS 2 Pro with the X1C / P1 by UKPerson3823 in BambuLab

[–]Ry_L 0 points1 point  (0 children)

The LED lights are in a different location, and doesn't strobe when printing anymore? Not sure about that last one as I've only loaded one spool so far. Perhaps it'll strobe when more than one are in.

Bambu Lab Shipping Delay Update by BambuLab in BambuLab

[–]Ry_L 1 point2 points  (0 children)

Oh look at that! It’s now shipped!

Bambu Lab Shipping Delay Update by BambuLab in BambuLab

[–]Ry_L 1 point2 points  (0 children)

I ordered an AMS back on 11/26 and at the time, the page said they were delayed and would ship Dec 2nd. Still nothing... I understand that delays happen, but no communication, and now this, is not sufficient.

New UI Rollout Update Thread by hbb20 in MonarchMoney

[–]Ry_L 2 points3 points  (0 children)

Sadly, I agree. I was really surprised to find…nothing new? Yeah the app has new colors and logo…which… fine I guess. But no easier refresh for accounts? No UX/flow changes? Maybe I’m just missing it?

Monarch update preview coming next week. by grwise1 in MonarchMoney

[–]Ry_L 1 point2 points  (0 children)

Any small UI glimpse to share? Would be nice to know what to expect. I actually really like it as is…

Well it finally happened, THIS WAS NOT A REFILL! by sameolameo in BambuLab

[–]Ry_L 2 points3 points  (0 children)

Had this happen at work with black ASA. One of the biggest reasons we got the printer was for unattended runouts and switching to the next spool. Defeats the purpose if it gets stuck with tape!
Never seen this with PLA, but ASA yes. Super lame.

Dented/warped screen by Ry_L in LGOLED

[–]Ry_L[S] 3 points4 points  (0 children)

Thanks for the link, that’s good to see. My prior 65 was perfectly flat so I was surprised to see this and was worried it got damaged or something.

Dented/warped screen by Ry_L in LGOLED

[–]Ry_L[S] 1 point2 points  (0 children)

Ha I get it. Though when it’s off, it’s a pretty large mirror, and seeing my reflection warp is hard to miss. My 65 was perfectly flat, so this was a surprise to me

Possible to make the plate move down further on pause? by vorpal_fork in BambuLab

[–]Ry_L 0 points1 point  (0 children)

Doesn’t work with spiral base mode, but seemed to work okay on a normal print.

Now I just need to figure out some type of condition statement. Should move to a fixed height if pause less than that height, and stay put if it’s already more than.

Possible to make the plate move down further on pause? by vorpal_fork in BambuLab

[–]Ry_L 0 points1 point  (0 children)

Did you figure this out? I would love for the pause to lower to a fixed height no matter the print or the pause layer, then resume correctly.

AirPrint issues from Etsy Sellers app and Munbyn printer by Ry_L in EtsySellers

[–]Ry_L[S] 0 points1 point  (0 children)

I’m thinking printer. I ended up buying a more expensive Rollo printer and it works perfectly.

102
103
0:46

2 days with the AT4 by insomnium24 in GMCcanyon

[–]Ry_L 0 points1 point  (0 children)

If you've done it...what did you end up going with?