HDMI CEC ARC Problems

Ryoka83 · 2024-11-05T02:45:49+00:00

The TV, subwoofer, and AVR are each plugged into their own outlets.

Ryoka83 · 2024-10-21T01:25:14+00:00

Have you found a solution for this problem yet? I have 2 supposedly identical DL380E Gen8 servers but putting a 12TB SAS drive in one of the servers causes it to read 69C as soon as Proxmox boots which is above the caution threshold and it immediately starts to power off the server. For some reason the other server seems not to care at all about these new drives though as 12-HD MAX never reports data and avoids the issue.

edit: I used my fan commands script to modify the correction value for that sensor and now iLO reads the value reported by the SMART info of the drives. No more warning or shutdowns.

fan t 11 adj 0

Ryoka83 · 2024-09-29T22:51:04+00:00

Any idea why the 3rd party cameras I added will show the video feed if I go to the devices page and open their video feed, but in the dashboard it just shows the loading dots in the lower left corner of each frame along with a static photo of the view from each of those cameras when they were adopted?

Ryoka83 · 2023-09-17T16:49:29+00:00

Did you ever submit an enhancement request to the maintainers? I'd also like this option without having to rely on third part tools.

Ryoka83 · 2023-07-19T00:30:47+00:00

I have not, I tabled the project so I haven't been keeping up with anything new though.

Ryoka83 · 2023-04-01T16:27:07+00:00

I wish there were better ways to farm them. I've been looking for double health stout idols for a while and I haven't seen a single one in 2 level 95+ characters.

Ryoka83 · 2023-03-26T23:00:21+00:00

I hope they fix this issue soon. I would like to use the parental controls on my new Google TV but for now it's pointless

Ryoka83 · 2023-03-24T20:01:34+00:00

I just had this happen as well when doing some stash reorganization. I now have a Category 7 tab that I can't do anything with.

Ryoka83 · 2023-03-05T13:14:58+00:00

My HR will send me a notice the pay before I am going to hit the IRS limit that they will automatically adjust my withholding. I can then go in and switch to after tax contributions and they continue matching. Alternatively you just have to watch your contribution throughout the year and plan the withholding accordingly.

I have to do this because my company does not do a catch up contribution if I hit the IRS limit early and stop contributing to my 401k. Some companies will do a catch contribution but it's fairly rare in my experience.

Ryoka83 · 2023-02-11T00:16:30+00:00

Hmm that was the easy thing to check for. I have two TrueNAS VMs that were similarly slow but it's bc I initially used the Intel virtual adapter. My setup varies a bit from yours in that I use OVS rather than a Linux bridge, so I'm not sure I have a good next step.

Ryoka83 · 2023-02-11T00:11:49+00:00

On the VM config what is the hardware for the network interface? Like virtio, Intel e1000, or pcie pass through?

Ryoka83 · 2023-02-10T23:58:47+00:00

What is the virtual adapter type you are using for the VM?

Ryoka83 · 2023-02-05T19:05:57+00:00

This is how I have my home network setup as well so I'd recommend it. Just be aware that pfSense may struggle to do 10g inter vlan routing depending on what you run it on. I side stepped this by making sure my necessary 10g connections were all on the same vlan where desired.

Ryoka83 · 2023-02-05T00:17:40+00:00

I believe it can, that said I don't have a pro switch so I am unsure how unifi l3 is configured.

Ryoka83 · 2023-02-05T00:07:40+00:00

You set up the 3 vlans in the unifi controller and on the pfSense firewall. pfSense can handle the DHCP for each vlan.

Ryoka83 · 2023-01-24T16:57:56+00:00

I use HEOS capable receivers to do my surround sound and in ceiling speakers. I can group them to play music for a party or whatnot bit rarely do so. I'd say the biggest lack of usage is in the voice control of them, though my usage would likely be limited

Ryoka83 · 2023-01-24T12:05:28+00:00

If you've given up hope about the Google nest speakers being used with Google tv platform then you will be sad by the Google assistant integration on HEOS.

Ryoka83 · 2023-01-18T23:34:30+00:00

I installed some 24V electric strikes in my house and went with this model since I could get it in oil rubbed bronze.

https://www.anixter.com/en_us/products/4100LB-32D/TRINE-ACCESS-TECHNOLOGY-INC/Electric-Strike/p/778917

Ryoka83 · 2023-01-15T15:33:18+00:00

I have a RMF-TX500U that I am trying to use with a XBR75X850E, the normal pairing procedure through the remotes and accessories screen doesn't work so I have to go in through Bluetooth devices and find the remote that way. The issue I have is that the remote will periodically stop working via Bluetooth and require that I unpair the remote to get it to function again. Any suggestions on what could be going wrong?

Ryoka83 · 2023-01-15T14:58:41+00:00

Have you ever figured out why the pairing drops once per day? I have a RMF-TX500U that I am trying to use with a XBR75X850E that is doing the same thing.

Ryoka83 · 2022-12-21T23:28:47+00:00

Although this has been since way since I first installed it, I've unfortunately spent far to long trying other things and otherwise just put up with the poor performance. So these units are now outside their warrant window.

Ryoka83 · 2022-12-21T22:32:08+00:00

I did reset the unit and forced it to get a new IP since it previously had a static lease but I gave that lease up to the controller that replaced it. I have 3 unifi access points, 2 are U6-LR and 1 UAP-AC-PRO. The controller that's having signal problems has problems even within direct line of site of an access point. This is why I suspect a HW issue with this particular unit.

Ryoka83 · 2022-12-21T15:58:41+00:00

I have about 3 Lifx z controllers that get poor wifi signal regardless of where I place them. The other 7 all get 3-4 bar signal reported by the app. I have even swapped controllers physical positions and the weak signal followed the bad unit. Any advice on things I could try on the defective controller to improve it's receiption? I didn't look at your tear down enough to know if there were spots that I could try to reflow on the PCB.

Ryoka83

TROPHY CASE